G700-MG-MIB :: cmgStaticControllerHosts

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › G700-MG-MIB › cmgStaticControllerHosts

cmgStaticControllerHosts

Module: G700-MG-MIB

OID (symbolic): G700-MG-MIB::cmgStaticControllerHosts

OID (numeric): 1.3.6.1.4.1.6889.2.9.1.3.6

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: Comma-separated list of up to four administered static IPv4 and IPv6 addresses for primary and backup call controllers. IPv4 addresses should be in the form '123.124.125.126', with no port numbers. (The Media Gateway always uses the default H.248 port number 2945). IPv6 address should be in the form of '2002:8740:64e2::8740:64e2'. Use '+' if there is both IPv4 and IPv6 address on the same index/location. An IP address may appear more than once in the list. If cmgUseDhcpForMgcList is equal to off(2), these are the only addresses the gateway will try. In that case this list must contain at least one active entry. Changes to the list take effect when the gateway is restarted. Example for IPv4 and IPv6 address configuration: '135.6.8.98+2001:db8::370:7334, 135.6.8.99, 2001:db8::1428:57ab'

What is cmgStaticControllerHosts?

A comma-separated list of up to four static primary/backup call-controller IPv4/IPv6 addresses (with '+' joining a dual-stack pair at one position); this is the only list tried if cmgUseDhcpForMgcList is off, and changes take effect only on restart.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6889.2.9.1.3.6
snmpwalk -v2c -c public <target> G700-MG-MIB::cmgStaticControllerHosts

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6889.2.9.1.3.6.1
snmpget -v2c -c public <target> G700-MG-MIB::cmgStaticControllerHosts.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6889.2.9.1.3.6.1 s <value>

Start monitoring Avaya G700/G450/G350 H.248 Media Gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the G700-MG-MIB::cmgStaticControllerHosts OID value, configure state conditions and alerts, and monitor any Avaya G700/G450/G350 H.248 Media Gateway from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6889avayaAV-APPLICATION-ENABLEMENT-SERVICES-MIB
1.3.6.1.4.1.6889.2mibsAV-APPLICATION-ENABLEMENT-SERVICES-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6889.2.9g700MediaGatewayMIBG700-MG-MIB
1.3.6.1.4.1.6889.2.9.1cmgmibG700-MG-MIB
1.3.6.1.4.1.6889.2.9.1.3cmgControllersG700-MG-MIB
1.3.6.1.4.1.6889.2.9.1.3.6cmgStaticControllerHostsG700-MG-MIB