Fx8210-private

All MIBs › Fx8210-private

Category: Vendor: Fx8210

Description: Vendor-private MIB for the Fx8210 device providing proprietary management and configuration objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Fx8210-private?

Fx8210-private is a vendor-private SNMP MIB for the Fx8210 device, exposing proprietary management and configuration objects along with a generic event trap for asynchronous notifications. Beyond configuration, its primary runtime-monitorable surface appears to be fault/event notification, since the single documented object is a trap used to signal device events to a management station. This makes it primarily useful for fault monitoring, alerting an operator whenever the device raises an internal event rather than providing rich polled performance or hardware-health data. No module description or dependency information is available, so any relationship to other MIBs cannot be confirmed. It would be deployed wherever an Fx8210 unit is managed, with a receiving NMS configured to trap on eventTrap notifications. Engineers can download the Fx8210-private file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Fx8210-private. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fibronics FX8210 switch (legacy) — Enterprise OID 22 resolves to Fibronics, consistent with the sibling FIBRONICS-PROPRIETARY-FX8210-B-MIB module for the same FX8210 device family; previously left as 'vendor unspecified'.

Monitoring Examples

An operator would configure their NMS to receive and log eventTrap notifications from the Fx8210 device so that any anomalous internal event is surfaced immediately rather than only being discoverable via periodic polling. Because so little else is documented in this MIB, no other specific object-level polling scenario can be described honestly.

What Can Be Monitored

device event trap notifications

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
NetworkAddress
TimeTicks
internet
mgmt

OIDs

OID symbolic	OID numeric	Type	Access	Description
enterprises	1.3.6.1.4.1
OCT eventTrap	1.3.6.1.4.1.22.3.3.1	OCTET STRING	not-accessible	Octet string used to send events to NMS. String description: 1'st octet : severity code (ASCII decimal) 2'nd octet : space 3'rd - 5'th octet : diu number (ASCII decimal) 6'th octet : space 7'th - 12'th octet : message code (ASCII decimal) e.g: BR0345 13'th octet : space 14'th and up : extra message string (ASCII)
fibronics	1.3.6.1.4.1.22
finexsystem	1.3.6.1.4.1.22.10.1
fxm8000	1.3.6.1.4.1.22.10
OCT fxmSystemBootGenName	1.3.6.1.4.1.22.10.1.1.6	OCTET STRING	read-only	Path and file name that is sent as a TFTP request
INT fxmSystemBootMode	1.3.6.1.4.1.22.10.1.1.7	INTEGER	read-only	Method for booting
IP fxmSystemBootServer	1.3.6.1.4.1.22.10.1.1.5	IpAddress	read-only	IP address to which a TFTP for boot is sent.
IP fxmSystemBroadcastOpt	1.3.6.1.4.1.22.10.1.1.4	IpAddress	read-only	Default Broadcast option: all zeros or all ones
IP fxmSystemIpAddr	1.3.6.1.4.1.22.10.1.1.1	IpAddress	read-only	IP address of the agent
IP fxmSystemIPDefGway	1.3.6.1.4.1.22.10.1.1.3	IpAddress	read-only	Default Gateway Address
IP fxmSystemIPNetMask	1.3.6.1.4.1.22.10.1.1.2	IpAddress	read-only	IP Network Mask
fxmsystemperm	1.3.6.1.4.1.22.10.1.2
INT fxmSystemReset	1.3.6.1.4.1.22.10.1.1.9	INTEGER	read-write	Resetting the target station. When reading the instance of this object the value has no meaning.
fxmsystemrun	1.3.6.1.4.1.22.10.1.1
INT fxmSystemSelfTestLevel	1.3.6.1.4.1.22.10.1.1.8	INTEGER	read-only	Type of self test to be executed upon cold-reset
INT pfxmSpanMode	1.3.6.1.4.1.22.10.1.2.9	INTEGER	read-write	Enable/Disable of the spanning tree Algorithm
OCT pfxmSystemBootGenName	1.3.6.1.4.1.22.10.1.2.6	OCTET STRING	read-write	Path and file name that is sent as a TFTP request
INT pfxmSystemBootMode	1.3.6.1.4.1.22.10.1.2.7	INTEGER	read-write	Method for booting
IP pfxmSystemBootServer	1.3.6.1.4.1.22.10.1.2.5	IpAddress	read-write	IP address to which a TFTP for boot is sent.
IP pfxmSystemBroadcastOpt	1.3.6.1.4.1.22.10.1.2.4	IpAddress	read-write	Default Broadcast option: all zeros or all ones
OCT pfxmSystemCommunity1	1.3.6.1.4.1.22.10.1.2.10	OCTET STRING	write-only	Community string number 1
OCT pfxmSystemCommunity2	1.3.6.1.4.1.22.10.1.2.11	OCTET STRING	write-only	Community string number 2
OCT pfxmSystemCommunity3	1.3.6.1.4.1.22.10.1.2.12	OCTET STRING	write-only	Community string number 3
OCT pfxmSystemCommunity4	1.3.6.1.4.1.22.10.1.2.13	OCTET STRING	write-only	Community string number 4
OCT pfxmSystemCommunity5	1.3.6.1.4.1.22.10.1.2.14	OCTET STRING	write-only	Community string number 5
OCT pfxmSystemCommunity6	1.3.6.1.4.1.22.10.1.2.15	OCTET STRING	write-only	Community string number 6
OCT pfxmSystemCommunity7	1.3.6.1.4.1.22.10.1.2.16	OCTET STRING	write-only	Community string number 7
OCT pfxmSystemCommunity8	1.3.6.1.4.1.22.10.1.2.17	OCTET STRING	write-only	Community string number 8
IP pfxmSystemIpAddr	1.3.6.1.4.1.22.10.1.2.1	IpAddress	read-write	IP address of the agent
IP pfxmSystemIPDefGway	1.3.6.1.4.1.22.10.1.2.3	IpAddress	read-write	Default Gateway Address
IP pfxmSystemIPNetMask	1.3.6.1.4.1.22.10.1.2.2	IpAddress	read-write	IP Network Mask
INT pfxmSystemSelfTestLevel	1.3.6.1.4.1.22.10.1.2.8	INTEGER	read-write	Type of self test to be executed upon cold-reset
private	1.3.6.1.4
IP pTrapAddrAddr	1.3.6.1.4.1.22.3.2.1.1.1	IpAddress	read-write	IP address of entity requesting event notification
OCT pTrapAddrComm	1.3.6.1.4.1.22.3.2.1.1.2	OCTET STRING	read-write	Community name the receiving entity will expect
pTrapAddrEntry	1.3.6.1.4.1.22.3.2.1.1		not-accessible
INT pTrapAddrState	1.3.6.1.4.1.22.3.2.1.1.5	INTEGER	read-write	Determines status of this entry
pTrapAddrTbl	1.3.6.1.4.1.22.3.2.1		not-accessible	Table of managers to which traps must be sent. Up to 5 entries in table
OCT pTrapAddrType	1.3.6.1.4.1.22.3.2.1.1.4	OCTET STRING	read-write	Type of event that should be reported to this address, bit 0 - authentication trap bit 1 - other SNMP traps bit 2 - Error Traps bit 3 - Diagnostic Traps bit 4 - Debug Traps
INT pTrapAddrVer	1.3.6.1.4.1.22.3.2.1.1.3	INTEGER	read-write	Version number supported by destination node
INT pTrapAging	1.3.6.1.4.1.22.3.2.3	INTEGER	read-write	Time in sec. until a trap entry is erased from the table.
INT pTrapLearning	1.3.6.1.4.1.22.3.2.2	INTEGER	read-write	Learn the addresses of the managers automatically.
IP rTrapAddrAddr	1.3.6.1.4.1.22.3.1.1.1.1	IpAddress	read-only	IP address of entity requesting event notification
INT rTrapAddrAge	1.3.6.1.4.1.22.3.1.1.1.7	INTEGER	read-only	A time stamp of the last time the Manager sent SNMP request to the target agent ( in 50 msec units ).
OCT rTrapAddrComm	1.3.6.1.4.1.22.3.1.1.1.2	OCTET STRING	read-only	Community name the receiving entity will expect
rTrapAddrEntry	1.3.6.1.4.1.22.3.1.1.1		not-accessible
INT rTrapAddrFlag	1.3.6.1.4.1.22.3.1.1.1.6	INTEGER	read-only	If the entry is fixed, it can not be deleted because of aging, which means it was copied from the permanent trap table.
INT rTrapAddrState	1.3.6.1.4.1.22.3.1.1.1.5	INTEGER	read-only	Determines status of this entry
rTrapAddrTbl	1.3.6.1.4.1.22.3.1.1		not-accessible	Table of managers to which traps must be sent. Up to 10 entries in table. Some (up to 5) entries in table are copied from the permanent trap table at reset time. The other entries are learned from SNMP requests coming to the target station.
OCT rTrapAddrType	1.3.6.1.4.1.22.3.1.1.1.4	OCTET STRING	read-only	Type of event that should be reported to this address, bit 0 - authentication trap bit 1 - other SNMP traps bit 2 - Error Traps bit 3 - Diagnostic Traps bit 4 - Debug Traps
INT rTrapAddrVer	1.3.6.1.4.1.22.3.1.1.1.3	INTEGER	read-only	Version number supported by destination node
INT rTrapAging	1.3.6.1.4.1.22.3.1.3	INTEGER	read-only	Time in sec. until a trap entry is erased from the table.
INT rTrapLearning	1.3.6.1.4.1.22.3.1.2	INTEGER	read-only	Learn the addresses of the managers automatically.
NTF sendGenericEvent	1.3.6.1.4.1.22.10.1.0.1			This trap message is generated by any software module in the FINEX software. Any type of event can be sent.
trap	1.3.6.1.4.1.22.3
traperm	1.3.6.1.4.1.22.3.2
traprun	1.3.6.1.4.1.22.3.1
trapvar	1.3.6.1.4.1.22.3.3

RFC description

Manages traps and runtime configuration for Fibronics FX8210 network devices.

Start monitoring Fibronics FX8210 switch (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Fx8210-private

What Is Fx8210-private?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

RFC description