FspR7-SPEQ-MIB :: speqConfigGainCal

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › FspR7-SPEQ-MIB › speqConfigGainCal

speqConfigGainCal

Module: FspR7-SPEQ-MIB

OID (symbolic): FspR7-SPEQ-MIB::speqConfigGainCal

OID (numeric): 1.3.6.1.4.1.2544.1.11.4.12.10.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

What is speqConfigGainCal?

Sets a gain calibration offset in 0.1 dB units applied on top of SPEQ's calculated gain, letting an engineer fine-tune the amplifier's actual output versus the theoretical calculation.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.11.4.12.10.1.4
snmpwalk -v2c -c public <target> FspR7-SPEQ-MIB::speqConfigGainCal

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.11.4.12.10.1.4.1
snmpget -v2c -c public <target> FspR7-SPEQ-MIB::speqConfigGainCal.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.11.4.12.10.1.4.1 i <value>

Start monitoring ADVA FSP3000R7 DWDM transport platform (Automatic Span Equalization) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FspR7-SPEQ-MIB::speqConfigGainCal OID value, configure state conditions and alerts, and monitor any ADVA FSP3000R7 DWDM transport platform (Automatic Span Equalization) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.11fspR7ADVA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2544.1.11.4speqMIBFspR7-SPEQ-MIB
1.3.6.1.4.1.2544.1.11.4.12speqConfigurationMIBFspR7-SPEQ-MIB
1.3.6.1.4.1.2544.1.11.4.12.10speqConfigTableFspR7-SPEQ-MIB
1.3.6.1.4.1.2544.1.11.4.12.10.1speqConfigEntryFspR7-SPEQ-MIB
1.3.6.1.4.1.2544.1.11.4.12.10.1.4speqConfigGainCalFspR7-SPEQ-MIB