FSM7326-RADIUS-MIB

All MIBs › FSM7326-RADIUS-MIB

Organization: Netgear

Last Updated: 2003-11-10

Category: Protocol: RADIUS, Vendor: Netgear

Description: Netgear FSM7326 switch MIB for RADIUS authentication and accounting server configuration and statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FSM7326-RADIUS-MIB?

FSM7326-RADIUS-MIB is a Netgear MIB specific to the FSM7326 managed switch, providing configuration and statistics objects for RADIUS-based authentication and accounting on that device. Although no object list was captured for this module in this batch, by its stated purpose it would expose RADIUS server address/port configuration, retry/timeout parameters, and accounting/authentication statistics counters. Its monitoring value centers on software/service status of the switch's network-access-control function: it would let an operator confirm which RADIUS servers are configured, detect authentication request failures or timeouts, and track accounting message counts, revealing connectivity problems between the switch and its RADIUS infrastructure. It builds on the concepts of the standard IETF RADIUS-AUTH-CLIENT-MIB/RADIUS-ACC-CLIENT-MIB even where implemented as a Netgear-specific variant. It is deployed on Netgear FSM7326 managed Ethernet switches in networks using 802.1X or management-login RADIUS authentication. Engineers can download the FSM7326-RADIUS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in FSM7326-RADIUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear FSM7326 managed Ethernet switch

Monitoring Examples

No sample objects were provided for this module, so specific object names cannot be cited; based on its description, an operator would typically be expected to poll RADIUS server reachability/timeout counters and authentication/accounting statistics to detect a failed or slow RADIUS server affecting 802.1X port authentication or switch login on the FSM7326.

What Can Be Monitored

RADIUS server configuration
authentication request statistics
accounting statistics
timeout/retry counters

Imported Objects

From FSM7326-REF-MIB

fsm7326

MODULE-IDENTITY

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
fsm7326Radius	1.3.6.1.4.1.4526.1.9.8			The FSM7326 Radius MIB
agentRadiusConfigGroup	1.3.6.1.4.1.4526.1.9.8.1
U32 agentRadiusMaxTransmit	1.3.6.1.4.1.4526.1.9.8.1.1	Unsigned32	read-write	Maximum number of retransmissions of a RADIUS request packet
U32 agentRadiusTimeout	1.3.6.1.4.1.4526.1.9.8.1.2	Unsigned32	read-write	Time out duration (in seconds) before packets are retransmitted
INT agentRadiusAccountingMode	1.3.6.1.4.1.4526.1.9.8.1.3	INTEGER	read-write	Identifies if RADIUS Accounting has been enabled or not
INT agentRadiusStatsClear	1.3.6.1.4.1.4526.1.9.8.1.4	INTEGER	read-write	When set to enable(1), all Radius statistics will be reset.
I32 agentRadiusAccountingIndexNextValid	1.3.6.1.4.1.4526.1.9.8.1.5	Integer32	read-only	Indicates the next valid index into the agentRadiusAccountingConfigTable for creation. If no additional entries are allowed, this will be 0.
agentRadiusAccountingConfigTable	1.3.6.1.4.1.4526.1.9.8.1.6		not-accessible	Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret. Only one entry is supported at this time.
agentRadiusAccountingConfigEntry	1.3.6.1.4.1.4526.1.9.8.1.6.1		not-accessible	Entry consisting of configuration data for a Radius Accounting Server.
I32 agentRadiusAccountingServerIndex	1.3.6.1.4.1.4526.1.9.8.1.6.1.1	Integer32	not-accessible	Unique index of the configured RADIUS accounting server
IP agentRadiusAccountingServerAddress	1.3.6.1.4.1.4526.1.9.8.1.6.1.2	IpAddress	read-create	IP Address of the configured RADIUS accounting server. This object cannot be changed after creation.
U32 agentRadiusAccountingPort	1.3.6.1.4.1.4526.1.9.8.1.6.1.3	Unsigned32	read-write	Port number for the RADIUS accounting server. This object cannot be configured on row creation.
STR agentRadiusAccountingSecret	1.3.6.1.4.1.4526.1.9.8.1.6.1.4	DisplayString	read-write	Configured shared sercret for the RADIUS accounting server. This object cannot be configured on row creation.
ROW agentRadiusAccountingStatus	1.3.6.1.4.1.4526.1.9.8.1.6.1.5	RowStatus	read-create
I32 agentRadiusServerIndexNextValid	1.3.6.1.4.1.4526.1.9.8.1.7	Integer32	read-only	Indicates the next valid index into the agentRadiusServerConfigTable for creation. If no additional entries are allowed, this will be 0.
agentRadiusServerConfigTable	1.3.6.1.4.1.4526.1.9.8.1.8		not-accessible	Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret
agentRadiusServerConfigEntry	1.3.6.1.4.1.4526.1.9.8.1.8.1		not-accessible	Entry consisting of configuration data for a Radius Server. Creation requires setting
I32 agentRadiusServerIndex	1.3.6.1.4.1.4526.1.9.8.1.8.1.1	Integer32	not-accessible	Unique index of the configured RADIUS server
IP agentRadiusServerAddress	1.3.6.1.4.1.4526.1.9.8.1.8.1.2	IpAddress	read-create	IP Address of the configured RADIUS server. This object cannot be changed after creation.
U32 agentRadiusServerPort	1.3.6.1.4.1.4526.1.9.8.1.8.1.3	Unsigned32	read-write	Port number for the RADIUS server. This object cannot be configured on row creation.
STR agentRadiusServerSecret	1.3.6.1.4.1.4526.1.9.8.1.8.1.4	DisplayString	read-write	Configured shared sercret for the RADIUS server. This object cannot be configured on row creation.
INT agentRadiusServerPrimaryMode	1.3.6.1.4.1.4526.1.9.8.1.8.1.5	INTEGER	read-write	Configure the RADIUS server to be the primary server. If there is any other server that is configured to be primary, that server is set to be a seconday server and this entry is set Primary. This object cannot be configured on row creation.
INT agentRadiusServerCurrentMode	1.3.6.1.4.1.4526.1.9.8.1.8.1.6	INTEGER	read-only	Indicate if the RADIUS server is the current server in user for authentication.
INT agentRadiusServerMsgAuth	1.3.6.1.4.1.4526.1.9.8.1.8.1.7	INTEGER	read-write	Enable or disable the message authenticator attribute for this RADIUS server. This object cannot be configured on row creation.
ROW agentRadiusServerStatus	1.3.6.1.4.1.4526.1.9.8.1.8.1.8	RowStatus	read-create

RFC description

Manages RADIUS authentication configuration on Netgear FSM7326 switches, supporting server and timeout settings.

Start monitoring Netgear FSM7326 managed Ethernet switch (RADIUS authentication) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FSM7326-RADIUS-MIB

What Is FSM7326-RADIUS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description