FSM7326-QOS-ACL-MIB

All MIBs › FSM7326-QOS-ACL-MIB

Organization: Netgear

Last Updated: 2003-11-10

Category: Technology: QoS, Vendor: Netgear

Description: Netgear FSM7326 switch MIB for Access Control List configuration used in quality of service policy enforcement.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FSM7326-QOS-ACL-MIB?

FSM7326-QOS-ACL-MIB is a Netgear vendor MIB for the FSM7326 switch that defines objects for configuring Access Control Lists (ACLs) used to enforce Quality of Service (QoS) traffic classification and policy. It generally exposes configuration-oriented data such as ACL rule definitions, match criteria, and their association with QoS classes or queues rather than raw performance counters. Its relevance to hardware/software monitoring is limited and mostly configuration-state oriented, letting an admin verify that intended ACL/QoS policies are correctly applied and active rather than tracking uptime or physical health. No module description text was available for this entry, so any dependency on standard QoS or ACL MIBs is inferred rather than confirmed. It is deployed on Netgear FSM7326 switches in environments needing traffic prioritization and access control enforcement at Layer 2/3, where FSM7326-QOS-ACL-MIB SNMP monitoring confirms ACL and QoS policy intent matches actual configuration.

IPNetwork Monitor allows you to monitor SNMP objects defined in FSM7326-QOS-ACL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear FSM7326 managed switch

Monitoring Examples

No sample object names were provided for this MIB, so a concrete example using real identifiers cannot be given without inventing them; in general, such a module would expose ACL rule tables and their bound QoS actions for verification that traffic policies match configuration intent.

What Can Be Monitored

ACL rule configuration
QoS classification policy
ACL-to-queue mapping

Imported Objects

From FSM7326-QOS-MIB

fsm7326QOS

MODULE-IDENTITY

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
fsm7326QOSACL	1.3.6.1.4.1.4526.1.9.3.2
aclTable	1.3.6.1.4.1.4526.1.9.3.2.1		not-accessible	A table of ACL instances.
aclEntry	1.3.6.1.4.1.4526.1.9.3.2.1.1		not-accessible
I32 aclIndex	1.3.6.1.4.1.4526.1.9.3.2.1.1.1	Integer32	not-accessible	The ACL index this instance is associated with.
ROW aclStatus	1.3.6.1.4.1.4526.1.9.3.2.1.1.3	RowStatus	read-create	Status of this instance. active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
aclIfTable	1.3.6.1.4.1.4526.1.9.3.2.2		not-accessible	A table of ACL interface instances.
aclIfEntry	1.3.6.1.4.1.4526.1.9.3.2.2.1		not-accessible
I32 aclIfIndex	1.3.6.1.4.1.4526.1.9.3.2.2.1.1	Integer32	not-accessible	The interface this ACL instance is associated with.
INT aclIfDirection	1.3.6.1.4.1.4526.1.9.3.2.2.1.2	INTEGER	not-accessible	The direction this ACL instance applies.
ROW aclIfStatus	1.3.6.1.4.1.4526.1.9.3.2.2.1.3	RowStatus	read-create	Status of this instance. active(1) - this ACL index instance is active createAndGo(4) - set to this value to assign an interface to an ACL destroy(6) - set to this value to remove an interface to an ACL
aclRuleTable	1.3.6.1.4.1.4526.1.9.3.2.3		not-accessible	A table of ACL Rules instances.
aclRuleEntry	1.3.6.1.4.1.4526.1.9.3.2.3.1		not-accessible	A table of ACL Classification Rules
I32 aclRuleIndex	1.3.6.1.4.1.4526.1.9.3.2.3.1.1	Integer32	not-accessible	The index of this instance.
INT aclRuleAction	1.3.6.1.4.1.4526.1.9.3.2.3.1.2	INTEGER	read-create	The type of action this rule should perform.
I32 aclRuleProtocol	1.3.6.1.4.1.4526.1.9.3.2.3.1.3	Integer32	read-create	icmp - 1 igmp - 2 ip - 4 tcp - 6 udp - 17 All values from 1 to 255 are valid.
IP aclRuleSrcIpAddress	1.3.6.1.4.1.4526.1.9.3.2.3.1.4	IpAddress	read-create	The Source IP Address used in the ACL Classification.
IP aclRuleSrcIpMask	1.3.6.1.4.1.4526.1.9.3.2.3.1.5	IpAddress	read-create	The Source IP Mask used in the ACL Classification.
I32 aclRuleSrcL4Port	1.3.6.1.4.1.4526.1.9.3.2.3.1.6	Integer32	read-create	The Source Port Number (Layer 4) used in the ACL Classification.
I32 aclRuleSrcL4PortRangeStart	1.3.6.1.4.1.4526.1.9.3.2.3.1.7	Integer32	read-create	The Source Port Number(Layer 4) range start.
I32 aclRuleSrcL4PortRangeEnd	1.3.6.1.4.1.4526.1.9.3.2.3.1.8	Integer32	read-create	The Source Port Number(Layer 4) range end.
IP aclRuleDestIpAddress	1.3.6.1.4.1.4526.1.9.3.2.3.1.9	IpAddress	read-create	The Destination IP Address used in the ACL Classification.
IP aclRuleDestIpMask	1.3.6.1.4.1.4526.1.9.3.2.3.1.10	IpAddress	read-create	The Destination IP Mask used in the ACL Classification.
I32 aclRuleDestL4Port	1.3.6.1.4.1.4526.1.9.3.2.3.1.11	Integer32	read-create	The Destination Port (Layer 4) used in ACl classification.
I32 aclRuleDestL4PortRangeStart	1.3.6.1.4.1.4526.1.9.3.2.3.1.12	Integer32	read-create	The Destination Port (Layer 4) starting range used in ACL classification.
I32 aclRuleDestL4PortRangeEnd	1.3.6.1.4.1.4526.1.9.3.2.3.1.13	Integer32	read-create	The Destination Port (Layer 4) ending range used in ACL classification.
I32 aclRuleIPDSCP	1.3.6.1.4.1.4526.1.9.3.2.3.1.14	Integer32	read-create	The Differentiated Services Code Point value.
I32 aclRuleIpPrecedence	1.3.6.1.4.1.4526.1.9.3.2.3.1.15	Integer32	read-create	The Type of Service (TOS) IP Precedence value.
I32 aclRuleIpTosBits	1.3.6.1.4.1.4526.1.9.3.2.3.1.16	Integer32	read-create	The Type of Service (TOS) Bits value.
I32 aclRuleIpTosMask	1.3.6.1.4.1.4526.1.9.3.2.3.1.17	Integer32	read-create	The Type of Service (TOS) Mask value.
ROW aclRuleStatus	1.3.6.1.4.1.4526.1.9.3.2.3.1.18	RowStatus	read-create	Status of this instance. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance

RFC description

Vendor-private MIB for Fortinet or similar FSM7326 platform QoS and Access Control List management; manages traffic policies and filtering rules.

Start monitoring Netgear FSM7326 managed switch (ACL-based QoS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FSM7326-QOS-ACL-MIB

What Is FSM7326-QOS-ACL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description