All MIBs › FRX-MIB › nodeBackcardWanIF
nodeBackcardWanIF
Module: FRX-MIB
OID (symbolic): FRX-MIB::nodeBackcardWanIF
OID (numeric): 1.3.6.1.4.1.177.3.2.22
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enables or disables the backcard WAN I/F on the FRX node. The backcard must be enabled for WAN port functionality. Note: If the backcard is not physically present, an attempt to enable it will result in an error.
What is nodeBackcardWanIF?
Enables or disables the backcard's WAN interface specifically, distinct from the backcard's gateway function; the backcard must be enabled before this WAN port can be used, and enabling it with no backcard installed returns an error.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.177.3.2.22 snmpwalk -v2c -c public <target> FRX-MIB::nodeBackcardWanIF
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.177.3.2.22.1 snmpget -v2c -c public <target> FRX-MIB::nodeBackcardWanIF.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.177.3.2.22.1 i <value>
Start monitoring Legacy frame relay switch/access node (Netrix/FastComm-style FRX platform) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FRX-MIB::nodeBackcardWanIF OID value, configure state conditions and alerts, and monitor any Legacy frame relay switch/access node (Netrix/FastComm-style FRX platform) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.177 | net | FRX-MIB |
| 1.3.6.1.4.1.177.3 | frx | FRX-MIB |
| 1.3.6.1.4.1.177.3.2 | node | FRX-MIB |
| 1.3.6.1.4.1.177.3.2.22 | nodeBackcardWanIF | FRX-MIB |