All MIBs › FRDTE-OPT-MIB › cdx6500frdtesX25Options
cdx6500frdtesX25Options
Module: FRDTE-OPT-MIB
OID (symbolic): FRDTE-OPT-MIB::cdx6500frdtesX25Options
OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.3.2.1.26
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Select X.25 options on this station (logical link) as follows: NONE - no option specified CUG - check closed user group; otherwise, CUG passes transparently CAUSE - pass cause, diagnostic, code in outbound packets HOLD - hold calls over link restart INL - inter-node link. Link goes to another 6500 device DELAY - Enable Delay and Path Trace on this link (link must be connected to Rel. 4.xx node) Any combination of above specified by summing (e.g. CUG+CAUSE+. . .). NOTE: Please use cdx6500frdtesStnX25Options, which has been added to replace this object.
What is cdx6500frdtesX25Options?
A bitmask of X.25 options for this station -- CUG (enforce closed user group checks), CAUSE (pass cause/diagnostic codes outbound), HOLD (hold calls across a link restart), INL (mark this as an inter-node link to another 6500 device), or DELAY (enable delay/path trace, requires a Release 4.xx node), summed together as needed, with NONE meaning no options. The DESCRIPTION notes this object has been superseded by cdx6500frdtesStnX25Options, so an admin should configure X.25 options through that newer object instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.3.2.1.26 snmpwalk -v2c -c public <target> FRDTE-OPT-MIB::cdx6500frdtesX25Options
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.3.2.1.26.1 snmpget -v2c -c public <target> FRDTE-OPT-MIB::cdx6500frdtesX25Options.1
Start monitoring Codex CDX-6500 Frame Relay access device (DTE/customer-premises side) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FRDTE-OPT-MIB::cdx6500frdtesX25Options OID value, configure state conditions and alerts, and monitor any Codex CDX-6500 Frame Relay access device (DTE/customer-premises side) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1 | cdx6500CfgProtocolGroup | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.3 | cdx6500PCTStationProtocolGroup | ATM-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.1.3.2 | cdx6500SPCTFRDTEStationTable | FRDTE-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.3.2.1 | cdx6500SPCTFRDTEStationEntry | FRDTE-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.3.2.1.26 | cdx6500frdtesX25Options | FRDTE-OPT-MIB |