All MIBs › FRDTE-OPT-MIB › cdx6500frdtepControlProtocolOptions
cdx6500frdtepControlProtocolOptions
Module: FRDTE-OPT-MIB
OID (symbolic): FRDTE-OPT-MIB::cdx6500frdtepControlProtocolOptions
OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.1.5.1.25
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: These options control the PVC management protocol none - No option selected async - The port will send/receive asynchronous A-bit if it is performing Network side protocol functionality nbit - The port will send and accept N-bit messages dbit - The port will send and accept D-bit messages This forces ASYNC to be specified (dbit+async)
What is cdx6500frdtepControlProtocolOptions?
Selects options for the PVC management protocol on this port: none for no option, async to send/receive the asynchronous A-bit when acting as network side, nbit to handle N-bit messages, or dbit to handle D-bit messages (which forces async to also be set). An admin uses this to enable the specific PVC status-signaling bits the attached network or equipment expects.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.5.1.25 snmpwalk -v2c -c public <target> FRDTE-OPT-MIB::cdx6500frdtepControlProtocolOptions
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.5.1.25.1 snmpget -v2c -c public <target> FRDTE-OPT-MIB::cdx6500frdtepControlProtocolOptions.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.449.2.1.2.1.1.5.1.25.1 s <value>
Start monitoring Codex CDX-6500 Frame Relay access device (DTE/customer-premises side) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FRDTE-OPT-MIB::cdx6500frdtepControlProtocolOptions OID value, configure state conditions and alerts, and monitor any Codex CDX-6500 Frame Relay access device (DTE/customer-premises side) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1 | cdx6500CfgProtocolGroup | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1 | cdx6500PCTPortProtocolGroup | ALC-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.1.1.5 | cdx6500PCTFRDTEPortTable | FRDTE-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.5.1 | cdx6500PCTFRDTEPortEntry | FRDTE-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.5.1.25 | cdx6500frdtepControlProtocolOptions | FRDTE-OPT-MIB |