FORTINET-MIB-280

All MIBs › FORTINET-MIB-280

Category: Vendor: Fortinet

Description: Fortinet legacy SNMP MIB for firmware version 2.80 providing system, interface, and session management objects for older FortiGate security appliances.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FORTINET-MIB-280?

FORTINET-MIB-280 is Fortinet's vendor-specific SNMP MIB for legacy firmware version 2.80 running on older FortiGate security appliances (UTM/firewall devices). Per its available description, it centers on basic system identification data such as the device's model number, in keeping with Fortinet's early-generation MIB structure later expanded into much larger modern Fortinet MIB releases. Its stated scope spans system, interface, and session management objects, meaning it would have supported monitoring of appliance identity, network interface status, and active session counts as software/hardware status indicators on the firewall. No dependency on external MIBs is evident from the material available, and it functions as a self-contained legacy Fortinet MIB. It was deployed on FortiGate firewalls running 2.80-era FortiOS firmware, now largely superseded by current Fortinet MIB releases. Engineers can download the FORTINET-MIB-280 file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in FORTINET-MIB-280. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fortinet FortiGate security appliance (legacy firmware 2.80)

Monitoring Examples

The available data for this module provides no concrete object names beyond a general "system model number" description, so a specific table/object polling scenario cannot be honestly constructed; in practice such an object would be read to confirm which FortiGate hardware model and firmware generation is deployed, supporting inventory and version tracking rather than a detailed anomaly-detection scenario.

What Can Be Monitored

system model identification

Imported Objects

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

How to Use in IPNetwork Monitor

Example using fnHaStatsPktCount OID:

Select a Fortinet FortiGate security appliance (legacy firmware 2.80) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type fnHaStatsPktCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Packets Counter of HA Cluster's unit. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
fnAdmin	1.3.6.1.4.1.12356.1.101
IP fnAdminAddr	1.3.6.1.4.1.12356.1.101.2.1.3	IpAddress	read-only	An address of a subnet where this admin account can be used from
fnAdminEntry	1.3.6.1.4.1.12356.1.101.2.1		not-accessible	An entry containing information applicable to a particular admin account
FNI fnAdminIndex	1.3.6.1.4.1.12356.1.101.2.1.1	FnIndex	read-only	An index of admin account
IP fnAdminMask	1.3.6.1.4.1.12356.1.101.2.1.4	IpAddress	read-only	A mask of a subnet where this admin account can be used from
STR fnAdminName	1.3.6.1.4.1.12356.1.101.2.1.2	DisplayString	read-only	A username of an account
I32 fnAdminNumber	1.3.6.1.4.1.12356.1.101.1	Integer32	read-only	The number of admin accounts in fnAdminTable
FNA fnAdminPerm	1.3.6.1.4.1.12356.1.101.2.1.5	FnAdminPerm	read-only	Access level of this admin account
fnAdminTable	1.3.6.1.4.1.12356.1.101.2		not-accessible	A list of admin accounts
fnBridge	1.3.6.1.4.1.12356.15
STR fnBridgeFgtFailure	1.3.6.1.4.1.12356.15.1	DisplayString	read-only	FortiGate failure detected by FortiBridge
fnDomains	1.3.6.1.4.1.12356.2
fnHa	1.3.6.1.4.1.12356.1.100
FNB fnHaAutoSync	1.3.6.1.4.1.12356.1.100.4	FnBoolState	read-only	Status of an automatic configuration synchronization
I32 fnHaGroupId	1.3.6.1.4.1.12356.1.100.1	Integer32	read-only	HA cluster group ID
FNB fnHaOverride	1.3.6.1.4.1.12356.1.100.3	FnBoolState	read-only	Status of a master override flag
INT fnHaPriority	1.3.6.1.4.1.12356.1.100.2	INTEGER	read-only	HA clustering priority (default - 127)
FNH fnHaSchedule	1.3.6.1.4.1.12356.1.100.5	FnHaSchedule	read-only	Load-balancing schedule in A-A mode
C32 fnHaStatsAvCount	1.3.6.1.4.1.12356.1.100.6.1.10	Counter32	read-only	AV Counter of HA Cluster's unit
C32 fnHaStatsByteCount	1.3.6.1.4.1.12356.1.100.6.1.8	Counter32	read-only	Bytes Counter of HA Cluster's unit
G32 fnHaStatsCpuUsage	1.3.6.1.4.1.12356.1.100.6.1.3	Gauge32	read-only	CPU Usage of HA Cluster's unit
fnHaStatsEntry	1.3.6.1.4.1.12356.1.100.6.1		not-accessible	Statistics for a particular HA cluster's unit
C32 fnHaStatsIdsCount	1.3.6.1.4.1.12356.1.100.6.1.9	Counter32	read-only	IDS Counter of HA Cluster's unit
FNI fnHaStatsIndex	1.3.6.1.4.1.12356.1.100.6.1.1	FnIndex	read-only	An index value that uniquely identifies an unit in the HA Cluster
G32 fnHaStatsMemUsage	1.3.6.1.4.1.12356.1.100.6.1.4	Gauge32	read-only	Memory Usage of HA Cluster's unit
G32 fnHaStatsNetUsage	1.3.6.1.4.1.12356.1.100.6.1.5	Gauge32	read-only	Network Usage of HA Cluster's unit
C32 fnHaStatsPktCountEx	1.3.6.1.4.1.12356.1.100.6.1.7	Counter32	read-only	Packets Counter of HA Cluster's unit
STR fnHaStatsSerial	1.3.6.1.4.1.12356.1.100.6.1.2	DisplayString	read-only	Serial number of HA Cluster's unit
G32 fnHaStatsSesCount	1.3.6.1.4.1.12356.1.100.6.1.6	Gauge32	read-only	Sessions Counter of HA Cluster's unit
fnHaStatsTable	1.3.6.1.4.1.12356.1.100.6		not-accessible	HA cluster status
fnIp	1.3.6.1.4.1.12356.4
fnIps	1.3.6.1.4.1.12356.12
fnIpSessEntry	1.3.6.1.4.1.12356.4.2.1		not-accessible	Particular IP Session info
C32 fnIpSessExp	1.3.6.1.4.1.12356.4.2.1.7	Counter32	read-only	Time (in seconds) before connection expires
IP fnIpSessFromAddr	1.3.6.1.4.1.12356.4.2.1.3	IpAddress	read-only	Source IP address
INT fnIpSessFromPort	1.3.6.1.4.1.12356.4.2.1.4	INTEGER	read-only	Source Port number
FNI fnIpSessIndex	1.3.6.1.4.1.12356.4.2.1.1	FnIndex	read-only	An index value that uniquely identifies an IP session
FNS fnIpSessProto	1.3.6.1.4.1.12356.4.2.1.2	FnSessProto	read-only	The protocol of the connection
fnIpSessTable	1.3.6.1.4.1.12356.4.2		not-accessible	IP Sessions Info
IP fnIpSessToAddr	1.3.6.1.4.1.12356.4.2.1.5	IpAddress	read-only	Destination IP address
INT fnIpSessToPort	1.3.6.1.4.1.12356.4.2.1.6	INTEGER	read-only	Destination Port number
FNI fnIpsSigId	1.3.6.1.4.1.12356.12.1	FnIndex	read-only	ID of IPS signature
IP fnIpsSigSrcIp	1.3.6.1.4.1.12356.12.2	IpAddress	read-only	Source IP Address of the IPS signature trigger
fnLogging	1.3.6.1.4.1.12356.1.104
I32 fnLogOption	1.3.6.1.4.1.12356.1.104.1	Integer32	read-only	Logging preferences
I32 fnMesgNumber	1.3.6.1.4.1.12356.1.105.1	Integer32	read-only	The number of custom messages in sysMesgTable
fnMessages	1.3.6.1.4.1.12356.1.105
I32 fnOptIdleTimeout	1.3.6.1.4.1.12356.1.103.1	Integer32	read-only	Idle period after which the administrator is automatically logged out off the system
fnOptions	1.3.6.1.4.1.12356.1.103
G32 fnSysCpuUsage	1.3.6.1.4.1.12356.1.8	Gauge32	read-only	Instantaneous CPU usage
FNH fnSysHaMode	1.3.6.1.4.1.12356.1.6	FnHaMode	read-only	High-availabilty mode (Standalone, A-A or A-P)
G32 fnSysMemUsage	1.3.6.1.4.1.12356.1.9	Gauge32	read-only	Instantaneous memory utilization
I32 fnSysModel	1.3.6.1.4.1.12356.1.1	Integer32	read-only	System model number
FNO fnSysOpMode	1.3.6.1.4.1.12356.1.7	FnOpMode	read-only	Operational mode (Transparent or Nat)
STR fnSysSerial	1.3.6.1.4.1.12356.1.2	DisplayString	read-only	Device serial number
G32 fnSysSesCount	1.3.6.1.4.1.12356.1.10	Gauge32	read-only	Instantaneous session count
fnSystem	1.3.6.1.4.1.12356.1
STR fnSysVersion	1.3.6.1.4.1.12356.1.3	DisplayString	read-only	Device firmware version
STR fnSysVersionAv	1.3.6.1.4.1.12356.1.4	DisplayString	read-only	Antivirus DB version
STR fnSysVersionNids	1.3.6.1.4.1.12356.1.5	DisplayString	read-only	NIDS DB version
fnTraps	1.3.6.1.4.1.12356.0
FNU fnUserAuth	1.3.6.1.4.1.12356.1.102.2.1.3	FnUserAuth	read-only	Authentication type of the account
fnUserEntry	1.3.6.1.4.1.12356.1.102.2.1		not-accessible	An entry containing information applicable to a particular user account
FNI fnUserIndex	1.3.6.1.4.1.12356.1.102.2.1.1	FnIndex	read-only	An index of user account
STR fnUserName	1.3.6.1.4.1.12356.1.102.2.1.2	DisplayString	read-only	A name of user account
I32 fnUserNumber	1.3.6.1.4.1.12356.1.102.1	Integer32	read-only	The number of user accounts in fnUserTable
fnUsers	1.3.6.1.4.1.12356.1.102
FNB fnUserState	1.3.6.1.4.1.12356.1.102.2.1.4	FnBoolState	read-only	Status of the user account
fnUserTable	1.3.6.1.4.1.12356.1.102.2		not-accessible	A list of local and proxied (Radius server) user accounts
fnVdEntry	1.3.6.1.4.1.12356.2.2.1		not-accessible	An entry containing information applicable to a particular virtual domain
FNI fnVdIndex	1.3.6.1.4.1.12356.2.2.1.1	FnIndex	read-only	Internal virtual domain index
STR fnVdName	1.3.6.1.4.1.12356.2.2.1.2	DisplayString	read-only	Virtual domain name
I32 fnVdNumber	1.3.6.1.4.1.12356.2.1	Integer32	read-only	The number of virtual fnDomains in vdTable
fnVdTable	1.3.6.1.4.1.12356.2.2		not-accessible	A list of virtual fnDomains
fnVpn	1.3.6.1.4.1.12356.9
IP fnVpnDialupDstAddr	1.3.6.1.4.1.12356.9.1.1.7	IpAddress	read-only	Local subnet address
fnVpnDialupEntry	1.3.6.1.4.1.12356.9.1.1		not-accessible	Dialup VPN peer info
IP fnVpnDialupGateway	1.3.6.1.4.1.12356.9.1.1.2	IpAddress	read-only	Remote gateway IP address
FNI fnVpnDialupIndex	1.3.6.1.4.1.12356.9.1.1.1	FnIndex	read-only	An index value that uniquely identifies an VPN dialup peer
I32 fnVpnDialupLifetime	1.3.6.1.4.1.12356.9.1.1.3	Integer32	read-only	Tunnel life time (seconds)
IP fnVpnDialupSrcBegin	1.3.6.1.4.1.12356.9.1.1.5	IpAddress	read-only	Remote subnet address
IP fnVpnDialupSrcEnd	1.3.6.1.4.1.12356.9.1.1.6	IpAddress	read-only	Remote subnet mask
fnVpnDialupTable	1.3.6.1.4.1.12356.9.1		not-accessible	Dialup VPN peers info
I32 fnVpnDialupTimeout	1.3.6.1.4.1.12356.9.1.1.4	Integer32	read-only	Time before the next key exchange (seconds)
fortinet	1.3.6.1.4.1.12356

RFC description

Fortinet security appliance management MIB for system and operational status monitoring.

Start monitoring Fortinet FortiGate security appliance (legacy firmware 2.80) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FORTINET-MIB-280