FORTINET-300-MIB

All MIBs › FORTINET-300-MIB

Organization: Fortinet Technologies, Inc.

Last Updated: 2000-09-03

Category: Vendor: Fortinet

Description: Fortinet legacy SNMP MIB for firmware version 3.00 products providing base system and interface management objects for older FortiGate devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FORTINET-300-MIB?

FORTINET-300-MIB is a legacy Fortinet enterprise MIB written for FortiOS firmware version 3.00 on older FortiGate security appliances, providing baseline system and interface management objects. No sample objects were available in the source, but as a legacy "300-series" firmware MIB it would typically expose basic system identity/status objects (model, firmware version, uptime) and per-interface configuration/statistics, predating Fortinet's later, more detailed FORTINET-FORTIGATE-MIB. Administrators use such a MIB to monitor basic hardware/software status of an older FortiGate unit, such as system uptime, firmware version, and interface up/down state, though modern deployments would typically use the newer Fortinet MIB instead. There is no apparent dependency on other MIBs beyond standard IETF interface conventions it likely extends. It would be deployed on legacy FortiGate firewall/UTM appliances still running FortiOS 3.00 firmware in older network environments. Engineers can download the FORTINET-300-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in FORTINET-300-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

legacy FortiGate firewall/UTM appliance (FortiOS 3.00)

Monitoring Examples

Without concrete sample object names for this legacy module, a specific grounded example cannot be constructed; typically an admin would poll a system object for firmware version and uptime to confirm the appliance's basic health, alongside interface status objects to detect a down WAN or LAN interface on an older FortiGate unit.

What Can Be Monitored

system uptime
firmware version
interface up/down status

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-MIB

sysName

OBJECT-TYPE

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using fnHaStatsPktCount OID:

Select a Fortinet FortiGate firewall/UTM appliance (legacy FortiOS 3.00) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type fnHaStatsPktCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Packets Counter of HA Cluster's unit. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
fnAdmin	1.3.6.1.4.1.12356.1.101
IP fnAdminAddr	1.3.6.1.4.1.12356.1.101.2.1.3	IpAddress	read-only	An address of a subnet where this admin account can be used from
fnAdminEntry	1.3.6.1.4.1.12356.1.101.2.1		not-accessible	An entry containing information applicable to a particular admin account
FNI fnAdminIndex	1.3.6.1.4.1.12356.1.101.2.1.1	FnIndex	not-accessible	An index of admin account
IP fnAdminMask	1.3.6.1.4.1.12356.1.101.2.1.4	IpAddress	read-only	A mask of a subnet where this admin account can be used from
STR fnAdminName	1.3.6.1.4.1.12356.1.101.2.1.2	DisplayString	read-only	A username of an account
I32 fnAdminNumber	1.3.6.1.4.1.12356.1.101.1	Integer32	read-only	The number of admin accounts in fnAdminTable
fnAdminTable	1.3.6.1.4.1.12356.1.101.2		not-accessible	A list of admin accounts
fnAnalyzer	1.3.6.1.4.1.12356.20
STR fnAnalyzerEventAlert	1.3.6.1.4.1.12356.20.1	DisplayString	read-only	Detail of defined event alert sent from FortiAnalyzer
fnAntivirus	1.3.6.1.4.1.12356.11
STR fnAntivirusVirName	1.3.6.1.4.1.12356.11.1	DisplayString	read-only	Virus name that triggered event
fnAuthComplianceGroup	1.3.6.1.4.1.12356.99.3			Authentication related information
fnBridge	1.3.6.1.4.1.12356.15
STR fnBridgeFgtFailure	1.3.6.1.4.1.12356.15.1	DisplayString	read-only	FortiGate failure detected by FortiBridge
fnDomains	1.3.6.1.4.1.12356.2
NTF fnFMTrapConfChange	1.3.6.1.4.1.12356.0.150			Trap being sent if any configuration change is made, excluding changes made by a FortiManager
NTF fnFMTrapIfChange	1.3.6.1.4.1.12356.0.100			Trap is sent to managing FortiManager if an interface changes IP
fnHa	1.3.6.1.4.1.12356.1.100
FNB fnHaAutoSync	1.3.6.1.4.1.12356.1.100.4	FnBoolState	read-only	Status of an automatic configuration synchronization
fnHaComplianceGroup	1.3.6.1.4.1.12356.99.2			HA cluster related instrumentation
FNI fnHaGroupId	1.3.6.1.4.1.12356.1.100.1	FnIndex	read-only	HA cluster group ID
FNB fnHaOverride	1.3.6.1.4.1.12356.1.100.3	FnBoolState	read-only	Status of a master override flag
I32 fnHaPriority	1.3.6.1.4.1.12356.1.100.2	Integer32	read-only	HA clustering priority (default - 127)
FNH fnHaSchedule	1.3.6.1.4.1.12356.1.100.5	FnHaLBSchedule	read-only	Load-balancing schedule in A-A mode
C32 fnHaStatsAvCount	1.3.6.1.4.1.12356.1.100.6.1.10	Counter32	read-only	AV Counter of HA Cluster's unit
C32 fnHaStatsByteCount	1.3.6.1.4.1.12356.1.100.6.1.8	Counter32	read-only	Bytes Counter of HA Cluster's unit
G32 fnHaStatsCpuUsage	1.3.6.1.4.1.12356.1.100.6.1.3	Gauge32	read-only	CPU Usage of HA Cluster's unit
fnHaStatsEntry	1.3.6.1.4.1.12356.1.100.6.1		not-accessible	Statistics for a particular HA cluster's unit
STR fnHaStatsHostname	1.3.6.1.4.1.12356.1.100.6.1.11	DisplayString	read-only	Hostname of HA Cluster's unit
C32 fnHaStatsIdsCount	1.3.6.1.4.1.12356.1.100.6.1.9	Counter32	read-only	IDS Counter of HA Cluster's unit
FNI fnHaStatsIndex	1.3.6.1.4.1.12356.1.100.6.1.1	FnIndex	not-accessible	An index value that uniquely identifies an unit in the HA Cluster
G32 fnHaStatsMemUsage	1.3.6.1.4.1.12356.1.100.6.1.4	Gauge32	read-only	Memory Usage of HA Cluster's unit
G32 fnHaStatsNetUsage	1.3.6.1.4.1.12356.1.100.6.1.5	Gauge32	read-only	Network Usage of HA Cluster's unit
C32 fnHaStatsPktCountEx	1.3.6.1.4.1.12356.1.100.6.1.7	Counter32	read-only	Packets Counter of HA Cluster's unit
STR fnHaStatsSerial	1.3.6.1.4.1.12356.1.100.6.1.2	DisplayString	read-only	Serial number of HA Cluster's unit
G32 fnHaStatsSesCount	1.3.6.1.4.1.12356.1.100.6.1.6	Gauge32	read-only	Sessions Counter of HA Cluster's unit
fnHaStatsTable	1.3.6.1.4.1.12356.1.100.6		not-accessible	HA cluster status
fnHwSensorComplianceGroup	1.3.6.1.4.1.12356.99.8			Hardware sensor related information
I32 fnHwSensorCount	1.3.6.1.4.1.12356.1.106.1	Integer32	read-only	The number of hardware sensors in the system
INT fnHwSensorEntAlarmStatus	1.3.6.1.4.1.12356.1.106.2.1.4	INTEGER	read-only	Alarm status of the sensor
FNI fnHwSensorEntIndex	1.3.6.1.4.1.12356.1.106.2.1.1	FnIndex	not-accessible	Index of the hardware sensors
STR fnHwSensorEntName	1.3.6.1.4.1.12356.1.106.2.1.2	DisplayString	read-only	Sensor Name
fnHwSensorEntry	1.3.6.1.4.1.12356.1.106.2.1		not-accessible	An entry containing information of hardware sensors
STR fnHwSensorEntValue	1.3.6.1.4.1.12356.1.106.2.1.3	DisplayString	read-only	Reading value of the sensor
fnHwSensors	1.3.6.1.4.1.12356.1.106
fnHwSensorTable	1.3.6.1.4.1.12356.1.106.2		not-accessible	A list of hardware sensors in the sytem user accounts
FNI fnHwSensorTrapIndex	1.3.6.1.4.1.12356.1.106.3.1	FnIndex	accessible-for-notify	Index of the hardware sensor
fnHwSensorTrapObjects	1.3.6.1.4.1.12356.1.106.3
fnIp	1.3.6.1.4.1.12356.4
fnIps	1.3.6.1.4.1.12356.16
fnIpSessEntry	1.3.6.1.4.1.12356.4.2.1		not-accessible	Particular IP Session info
C32 fnIpSessExp	1.3.6.1.4.1.12356.4.2.1.7	Counter32	read-only	Time (in seconds) before connection expires
IP fnIpSessFromAddr	1.3.6.1.4.1.12356.4.2.1.3	IpAddress	read-only	Source IP address
I32 fnIpSessFromPort	1.3.6.1.4.1.12356.4.2.1.4	Integer32	read-only	Source Port number
FNI fnIpSessIndex	1.3.6.1.4.1.12356.4.2.1.1	FnIndex	not-accessible	An index value that uniquely identifies an IP session
FNS fnIpSessProto	1.3.6.1.4.1.12356.4.2.1.2	FnSessProto	read-only	The protocol of the connection
fnIpSessTable	1.3.6.1.4.1.12356.4.2		not-accessible	IP Sessions Info
IP fnIpSessToAddr	1.3.6.1.4.1.12356.4.2.1.5	IpAddress	read-only	Destination IP address
I32 fnIpSessToPort	1.3.6.1.4.1.12356.4.2.1.6	Integer32	read-only	Destination Port number
FNI fnIpsSigId	1.3.6.1.4.1.12356.16.1	FnIndex	read-only	ID of IPS signature
STR fnIpsSigMsg	1.3.6.1.4.1.12356.16.3	DisplayString	read-only	Message associated with IPS event
IP fnIpsSigSrcIp	1.3.6.1.4.1.12356.16.2	IpAddress	read-only	Source IP Address of the IPS signature trigger
fnLogging	1.3.6.1.4.1.12356.1.104
I32 fnLogOption	1.3.6.1.4.1.12356.1.104.1	Integer32	read-only	Logging preferences
fnManagement	1.3.6.1.4.1.12356.10
IP fnManIfIp	1.3.6.1.4.1.12356.10.3	IpAddress	read-only	IP address of the interface
IP fnManIfMask	1.3.6.1.4.1.12356.10.4	IpAddress	read-only	Mask of subnet the interface belongs to
STR fnManIfName	1.3.6.1.4.1.12356.10.2	DisplayString	read-only	Name of interface as used in configuration
STR fnManSysSerial	1.3.6.1.4.1.12356.10.1	DisplayString	read-only	Serial number of FortiGate sending trap
I32 fnMesgNumber	1.3.6.1.4.1.12356.1.105.1	Integer32	read-only	The number of custom messages in sysMesgTable
fnMessages	1.3.6.1.4.1.12356.1.105
fnMIBCompliance	1.3.6.1.4.1.12356.99.10			The compliance statement for the application MIB.
fnMIBConformance	1.3.6.1.4.1.12356.99
fnMiscComplianceGroup	1.3.6.1.4.1.12356.99.9			Miscellanious instrumentation
I32 fnOptAuthTimeout	1.3.6.1.4.1.12356.1.103.2	Integer32	read-only	Idle period after which firewall-authentication is automatically expired
I32 fnOptIdleTimeout	1.3.6.1.4.1.12356.1.103.1	Integer32	read-only	Idle period after which the administrator is automatically logged out off the system
fnOptions	1.3.6.1.4.1.12356.1.103
FNL fnOptLanguage	1.3.6.1.4.1.12356.1.103.3	FnLanguage	read-only	Language used for user interface
FNB fnOptLcdProtection	1.3.6.1.4.1.12356.1.103.4	FnBoolState	read-only	Status of the LCD protection
FNR fnRAIDCode	1.3.6.1.4.1.12356.1.15	FnRAIDSystemCode	read-only	RAID system events
STR fnRAIDDevName	1.3.6.1.4.1.12356.1.16	DisplayString	read-only	RAID Device name
fnSessionComplianceGroup	1.3.6.1.4.1.12356.99.4			Session related instrumentation
G32 fnSysCpuUsage	1.3.6.1.4.1.12356.1.8	Gauge32	read-only	Instantaneous CPU usage
G32 fnSysDiskCapacity	1.3.6.1.4.1.12356.1.11	Gauge32	read-only	Hard disk capacity (MB)
G32 fnSysDiskUsage	1.3.6.1.4.1.12356.1.12	Gauge32	read-only	Current hard disk usage (MB)
FNS fnSysEventCode	1.3.6.1.4.1.12356.1.14	FnSystemEventCode	read-only	System component events
FNH fnSysHaMode	1.3.6.1.4.1.12356.1.6	FnHaMode	read-only	High-availabilty mode (Standalone, A-A or A-P)
G32 fnSysMemCapacity	1.3.6.1.4.1.12356.1.13	Gauge32	read-only	Physical memory installed (KB)
G32 fnSysMemUsage	1.3.6.1.4.1.12356.1.9	Gauge32	read-only	Instantaneous memory utilization
FNM fnSysModel	1.3.6.1.4.1.12356.1.1	FnModel	read-only	System model
FNO fnSysOpMode	1.3.6.1.4.1.12356.1.7	FnOpMode	read-only	Operational mode (Transparent or Nat)
STR fnSysSerial	1.3.6.1.4.1.12356.1.2	DisplayString	read-only	Device serial number
G32 fnSysSesCount	1.3.6.1.4.1.12356.1.10	Gauge32	read-only	Instantaneous session count
fnSystem	1.3.6.1.4.1.12356.1
fnSystemComplianceGroup	1.3.6.1.4.1.12356.99.1			System related instrumentation
STR fnSysVersion	1.3.6.1.4.1.12356.1.3	DisplayString	read-only	Device firmware version
STR fnSysVersionAv	1.3.6.1.4.1.12356.1.4	DisplayString	read-only	Antivirus DB version
STR fnSysVersionNids	1.3.6.1.4.1.12356.1.5	DisplayString	read-only	NIDS DB version
NTF fnTrapAnalyzer	1.3.6.1.4.1.12356.0.1001			Trap sent when FortiAnalyzer event parameter exceeds configured limit. Event description included in trap.
NTF fnTrapAvFragmented	1.3.6.1.4.1.12356.0.604			Trap being sent when antivirus scanner detects a fragmented file or attachment
NTF fnTrapAvOversize	1.3.6.1.4.1.12356.0.602			Trap being sent when antivirus scanner detects an oversized file
NTF fnTrapAvPattern	1.3.6.1.4.1.12356.0.603			Trap being sent when antivirus scanner blocks a file matching a pattern
NTF fnTrapAvVirus	1.3.6.1.4.1.12356.0.601			Trap being sent when antivirus scanner detects a virus
NTF fnTrapBridge	1.3.6.1.4.1.12356.0.701			Trap being sent by FortiBridge when detecting a FortiGate failure
NTF fnTrapCpuHigh	1.3.6.1.4.1.12356.0.101			Trap being sent if CPU usage becomes too high
NTF fnTrapHaStateChange	1.3.6.1.4.1.12356.0.402			Trap being sent when the HA cluster member changes its state
NTF fnTrapHaSwitch	1.3.6.1.4.1.12356.0.401			Trap being sent when the HA cluster master changes
NTF fnTrapIdsPortScan	1.3.6.1.4.1.12356.0.502			Trap being sent when port scan attack is detected
NTF fnTrapIdsSynFlood	1.3.6.1.4.1.12356.0.501			Trap being sent when SYN flood attack is detected
NTF fnTrapImTableFull	1.3.6.1.4.1.12356.0.801			Trap sent when Instant Message white/black list table is full
NTF fnTrapIpChange	1.3.6.1.4.1.12356.0.201			Trap being sent when IP address of the specified interface has been changed
NTF fnTrapIpsAnomaly	1.3.6.1.4.1.12356.0.504			Trap being sent when IPS anomaly is detected
NTF fnTrapIpsSignature	1.3.6.1.4.1.12356.0.503			Trap being sent when IPS signature is detected
NTF fnTrapLogFull	1.3.6.1.4.1.12356.0.103			Trap being sent if log becomes full
NTF fnTrapMemLow	1.3.6.1.4.1.12356.0.102			Trap being sent if memory usage becomes too high
NTF fnTrapPSUFailureEvent	1.3.6.1.4.1.12356.0.104			Trap being sent when detected a power supply unit failure
NTF fnTrapRAIDEvent	1.3.6.1.4.1.12356.0.203			Trap being sent for RAID operation
fnTraps	1.3.6.1.4.1.12356.0
fnTrapsComplianceGroup	1.3.6.1.4.1.12356.99.6			Event notifications
fnTrapsComplianceGroupOld	1.3.6.1.4.1.12356.99.7			Unused notifications
NTF fnTrapSystemEvent	1.3.6.1.4.1.12356.0.202			Trap being sent when system component halt, reboot, upgrade etc.,
NTF fnTrapVpnTunDown	1.3.6.1.4.1.12356.0.302			Trap being sent when VPN tunnel is brought down
NTF fnTrapVpnTunUp	1.3.6.1.4.1.12356.0.301			Trap being sent when VPN tunnel is brought up
FNU fnUserAuth	1.3.6.1.4.1.12356.1.102.2.1.3	FnUserAuthType	read-only	Authentication type of the account
fnUserEntry	1.3.6.1.4.1.12356.1.102.2.1		not-accessible	An entry containing information applicable to a particular user account
FNI fnUserIndex	1.3.6.1.4.1.12356.1.102.2.1.1	FnIndex	not-accessible	An index of user account
STR fnUserName	1.3.6.1.4.1.12356.1.102.2.1.2	DisplayString	read-only	A name of user account
I32 fnUserNumber	1.3.6.1.4.1.12356.1.102.1	Integer32	read-only	The number of user accounts in fnUserTable
fnUsers	1.3.6.1.4.1.12356.1.102
FNB fnUserState	1.3.6.1.4.1.12356.1.102.2.1.4	FnBoolState	read-only	Status of the user account
fnUserTable	1.3.6.1.4.1.12356.1.102.2		not-accessible	A list of local and proxied (Radius server) user accounts
fnVdEntry	1.3.6.1.4.1.12356.2.2.1		not-accessible	An entry containing information applicable to a particular virtual domain
FNI fnVdIndex	1.3.6.1.4.1.12356.2.2.1.1	FnIndex	not-accessible	Internal virtual domain index
STR fnVdName	1.3.6.1.4.1.12356.2.2.1.2	DisplayString	read-only	Virtual domain name
I32 fnVdNumber	1.3.6.1.4.1.12356.2.1	Integer32	read-only	The number of virtual fnDomains in vdTable
fnVdTable	1.3.6.1.4.1.12356.2.2		not-accessible	A list of virtual fnDomains
fnVpn	1.3.6.1.4.1.12356.9
fnVPNComplianceGroup	1.3.6.1.4.1.12356.99.5			Session related instrumentation
IP fnVpnDialupDstAddr	1.3.6.1.4.1.12356.9.1.1.7	IpAddress	read-only	Local subnet address
fnVpnDialupEntry	1.3.6.1.4.1.12356.9.1.1		not-accessible	Dialup VPN peer info
IP fnVpnDialupGateway	1.3.6.1.4.1.12356.9.1.1.2	IpAddress	read-only	Remote gateway IP address
FNI fnVpnDialupIndex	1.3.6.1.4.1.12356.9.1.1.1	FnIndex	not-accessible	An index value that uniquely identifies an VPN dialup peer
I32 fnVpnDialupLifetime	1.3.6.1.4.1.12356.9.1.1.3	Integer32	read-only	Tunnel life time (seconds)
IP fnVpnDialupSrcBegin	1.3.6.1.4.1.12356.9.1.1.5	IpAddress	read-only	Remote subnet address
IP fnVpnDialupSrcEnd	1.3.6.1.4.1.12356.9.1.1.6	IpAddress	read-only	Remote subnet mask
fnVpnDialupTable	1.3.6.1.4.1.12356.9.1		not-accessible	Dialup VPN peers info
I32 fnVpnDialupTimeout	1.3.6.1.4.1.12356.9.1.1.4	Integer32	read-only	Time before the next key exchange (seconds)
IP fnVpnLocalGateway	1.3.6.1.4.1.12356.9.2	IpAddress	read-only	Local gateway IP address
IP fnVpnRemoteGateway	1.3.6.1.4.1.12356.9.3	IpAddress	read-only	Remote gateway IP address
fortinet	1.3.6.1.4.1.12356			MIB module for Fortinet network devices.

RFC description

MIB module for Fortinet network devices covering system monitoring, traps, and device management.

Start monitoring Fortinet FortiGate firewall/UTM appliance (legacy FortiOS 3.00) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FORTINET-300-MIB