FORTIMAIL-MIB-220

All MIBs › FORTIMAIL-MIB-220

Category: Vendor: Fortinet

Description: Fortinet FortiMail version 2.20 SNMP MIB providing email security appliance monitoring objects for an older legacy firmware release.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FORTIMAIL-MIB-220?

FORTIMAIL-MIB-220 is Fortinet's vendor-specific SNMP MIB for the legacy FortiMail 2.20 firmware release, an email security/anti-spam gateway appliance. Its documented content is minimal, centering on basic system identification such as the device's model string, consistent with an older-generation vendor MIB later superseded by newer FortiMail MIB releases with richer object sets. Even so, the intent of such a MIB is system-level status monitoring - identifying the appliance model (and by extension its software/firmware generation) so management stations can confirm which hardware/firmware generation is deployed. No dependency on other MIBs is evident from the available module description, and it appears to be a self-contained legacy Fortinet MIB. It would have been deployed on aging FortiMail email security appliances still running 2.20-era firmware, where FORTIMAIL-MIB-220 SNMP monitoring was limited to confirming basic model identity in installations that have not been upgraded.

IPNetwork Monitor allows you to monitor SNMP objects defined in FORTIMAIL-MIB-220. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fortinet FortiMail email security appliance (legacy firmware 2.20)

Monitoring Examples

The available data for this module contains no sample object names beyond a general "system model string" description, so a detailed polling scenario cannot be honestly constructed; in practice such an object would be read once to confirm the appliance's model identity for inventory purposes rather than polled repeatedly for operational status.

What Can Be Monitored

system model identification

Imported Objects

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

How to Use in IPNetwork Monitor

Example using fmlMailOptionsDeferQueue OID:

Select a Fortinet FortiMail email security appliance (legacy firmware 2.20) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type fmlMailOptionsDeferQueue into the Find box to locate it in the OID tree, then select it and click OK. Instantaneous deferred emails number. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
fortinet	1.3.6.1.4.1.12356
fortimail	1.3.6.1.4.1.12356.1688
fmlTraps	1.3.6.1.4.1.12356.1688.0
fmlSystem	1.3.6.1.4.1.12356.1688.1
STR fmlSysModel	1.3.6.1.4.1.12356.1688.1.1	DisplayString	read-only	System model string
STR fmlSysSerial	1.3.6.1.4.1.12356.1688.1.2	DisplayString	read-only	Device serial number
STR fmlSysVersion	1.3.6.1.4.1.12356.1688.1.3	DisplayString	read-only	Device firmware version
STR fmlSysVersionAv	1.3.6.1.4.1.12356.1688.1.4	DisplayString	read-only	Antivirus DB version
FML fmlSysOpMode	1.3.6.1.4.1.12356.1688.1.5	FmlOpMode	read-only	Operational mode (Gateway, Transparent or Server)
G32 fmlSysCpuUsage	1.3.6.1.4.1.12356.1688.1.6	Gauge32	read-only	Instantaneous CPU usage
G32 fmlSysMemUsage	1.3.6.1.4.1.12356.1688.1.7	Gauge32	read-only	Instantaneous memory utilization
G32 fmlSysLogDiskUsage	1.3.6.1.4.1.12356.1688.1.8	Gauge32	read-only	Instantaneous log disk usage
G32 fmlSysMailDiskUsage	1.3.6.1.4.1.12356.1688.1.9	Gauge32	read-only	Instantaneous mail disk usage
G32 fmlSysSesCount	1.3.6.1.4.1.12356.1688.1.10	Gauge32	read-only	Instantaneous session count
FML fmlSysEventCode	1.3.6.1.4.1.12356.1688.1.11	FmlSysEventCode	read-only	System component events
FML fmlRAIDCode	1.3.6.1.4.1.12356.1688.1.12	FmlRAIDCode	read-only	RAID system events
STR fmlRAIDDevName	1.3.6.1.4.1.12356.1688.1.13	DisplayString	read-only	RAID Device name
FML fmlHAEventId	1.3.6.1.4.1.12356.1688.1.14	FmlHAEventId	read-only	HA event type ID
IP fmlHAUnitIp	1.3.6.1.4.1.12356.1688.1.15	IpAddress	read-only	Unit IP address where event occurs
STR fmlHAEventReason	1.3.6.1.4.1.12356.1688.1.16	DisplayString	read-only	The reason for the HA event
IP fmlArchiveServerIp	1.3.6.1.4.1.12356.1688.1.18	IpAddress	read-only	IP address of the remote Archive Server
STR fmlArchiveFilename	1.3.6.1.4.1.12356.1688.1.19	DisplayString	read-only	Archive mail file name
fmlSysOptions	1.3.6.1.4.1.12356.1688.1.101
I32 fmlSysOptIdleTimeout	1.3.6.1.4.1.12356.1688.1.101.1	Integer32	read-only	Idle period after which the administrator is automatically logged out off the system
I32 fmlSysOptAuthTimeout	1.3.6.1.4.1.12356.1688.1.101.2	Integer32	read-only	Authentication idle timeout value
FML fmlSysOptsLan	1.3.6.1.4.1.12356.1688.1.101.3	FmlLanguageCode	read-only	Web administration language
FML fmlSysOptsLcdProt	1.3.6.1.4.1.12356.1688.1.101.4	FmlBoolState	read-only	Enable or disable LCD control buttons protection
fmlIp	1.3.6.1.4.1.12356.1688.1.102
fmlIpSessTable	1.3.6.1.4.1.12356.1688.1.102.2		not-accessible	IP Sessions Info
fmlIpSessEntry	1.3.6.1.4.1.12356.1688.1.102.2.1		not-accessible	Particular IP Session info
FML fmlIpSessIndex	1.3.6.1.4.1.12356.1688.1.102.2.1.1	FmlIndex	read-only	An index value that uniquely identifies an IP session
FML fmlIpSessProto	1.3.6.1.4.1.12356.1688.1.102.2.1.2	FmlSessProto	read-only	The protocol of the connection
IP fmlIpSessFromAddr	1.3.6.1.4.1.12356.1688.1.102.2.1.3	IpAddress	read-only	Source IP address
INT fmlIpSessFromPort	1.3.6.1.4.1.12356.1688.1.102.2.1.4	INTEGER	read-only	Source Port number
IP fmlIpSessToAddr	1.3.6.1.4.1.12356.1688.1.102.2.1.5	IpAddress	read-only	Destination IP address
INT fmlIpSessToPort	1.3.6.1.4.1.12356.1688.1.102.2.1.6	INTEGER	read-only	Destination Port number
C32 fmlIpSessExp	1.3.6.1.4.1.12356.1688.1.102.2.1.7	Counter32	read-only	Time (in seconds) before connection expires
fmlMailOptions	1.3.6.1.4.1.12356.1688.1.103
C32 fmlMailOptionsDeferQueueEx	1.3.6.1.4.1.12356.1688.1.103.1	Counter32	read-only	Instantaneous deferred emails number

RFC description

Defines management objects for Fortinet FortiMail security appliance operations and statistics.

Start monitoring Fortinet FortiMail email security appliance (legacy firmware 2.20) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FORTIMAIL-MIB-220