FN10-MIB :: sxsprotoCollisionRelief

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsFN10-MIBsxsprotoCollisionRelief

sxsprotoCollisionRelief

Module: FN10-MIB

OID (symbolic): FN10-MIB::sxsprotoCollisionRelief

OID (numeric): 1.3.6.1.4.1.97.2.12.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies whether the 10 Mbits Ethernet modified back-off algorithm is to be used. This option forces Ethernet port to stop the back-off timer when a transmit collision occured. It will start the timer again until no carrier on the wire. This option can reduce the number of transmit collisions. It may also slow down the transmit process under heavy loaded network.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.97.2.12.1.1.6
snmpwalk -v2c -c public <target> FN10-MIB::sxsprotoCollisionRelief

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.97.2.12.1.1.6.1
snmpget -v2c -c public <target> FN10-MIB::sxsprotoCollisionRelief.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.97.2.12.1.1.6.1 i <value>

Start monitoring Legacy hub/switch equipment (enterprise OID 3, CMU-registered) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FN10-MIB::sxsprotoCollisionRelief OID value, configure state conditions and alerts, and monitor any Legacy hub/switch equipment (enterprise OID 3, CMU-registered) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.97sigmaCT-ELS10-27-MIB
Numeric OIDNameModule
1.3.6.1.4.1.97.2es_1xeFN10-MIB
1.3.6.1.4.1.97.2.12sxprotoFN10-MIB
1.3.6.1.4.1.97.2.12.1sxprotoTableFN10-MIB
1.3.6.1.4.1.97.2.12.1.1sxprotoEntryFN10-MIB
1.3.6.1.4.1.97.2.12.1.1.6sxsprotoCollisionReliefFN10-MIB