All MIBs › FN10-MIB › sxprotoTrunking
sxprotoTrunking
Module: FN10-MIB
OID (symbolic): FN10-MIB::sxprotoTrunking
OID (numeric): 1.3.6.1.4.1.97.2.12.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies whether SMC's trunking protocol (an extension to the standard Spanning Tree) is to be used over this port.
What is sxprotoTrunking?
Enables or disables SMC's proprietary trunking protocol (an extension to standard Spanning Tree) on this port. This must be enabled on ports intended to participate in a bridge trunk group for link aggregation/redundancy.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.97.2.12.1.1.5 snmpwalk -v2c -c public <target> FN10-MIB::sxprotoTrunking
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.97.2.12.1.1.5.1 snmpget -v2c -c public <target> FN10-MIB::sxprotoTrunking.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.97.2.12.1.1.5.1 i <value>
Start monitoring Legacy hub/switch equipment (enterprise OID 3, CMU-registered) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FN10-MIB::sxprotoTrunking OID value, configure state conditions and alerts, and monitor any Legacy hub/switch equipment (enterprise OID 3, CMU-registered) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.97 | sigma | CT-ELS10-27-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.97.2 | es_1xe | FN10-MIB |
| 1.3.6.1.4.1.97.2.12 | sxproto | FN10-MIB |
| 1.3.6.1.4.1.97.2.12.1 | sxprotoTable | FN10-MIB |
| 1.3.6.1.4.1.97.2.12.1.1 | sxprotoEntry | FN10-MIB |
| 1.3.6.1.4.1.97.2.12.1.1.5 | sxprotoTrunking | FN10-MIB |