All MIBs › FJDARY-E101 › fjdaryTrapMessage
fjdaryTrapMessage
Module: FJDARY-E101
OID (symbolic): FJDARY-E101::fjdaryTrapMessage
OID (numeric): 1.3.6.1.4.1.211.1.21.1.101.11
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: This object is used to store detail messages when all trap is transmitted.
What is fjdaryTrapMessage?
Carries the free-text description that accompanies every trap this array sends, from configuration changes to critical faults. This is the human-readable text an admin actually reads in the NMS event log or email alert, e.g. describing which CM failed or that firmware was updated.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.211.1.21.1.101.11 snmpwalk -v2c -c public <target> FJDARY-E101::fjdaryTrapMessage
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.211.1.21.1.101.11.1 snmpget -v2c -c public <target> FJDARY-E101::fjdaryTrapMessage.1
Start monitoring Fujitsu ETERNUS DX100 S1 / E101-series disk array with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FJDARY-E101::fjdaryTrapMessage OID value, configure state conditions and alerts, and monitor any Fujitsu ETERNUS DX100 S1 / E101-series disk array from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.211 | fujitsu | Alert-Definition-Originator-MIB |
| 1.3.6.1.4.1.211.1 | product | CFAB-MIB |
| 1.3.6.1.4.1.211.1.21 | storage | ETERNUS-OR30-SV-MIB |
| 1.3.6.1.4.1.211.1.21.1 | nsp | ETERNUS-OR30-SV-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.211.1.21.1.101 | fjdarye101 | FJDARY-E101 |
| 1.3.6.1.4.1.211.1.21.1.101.11 | fjdaryTrapMessage | FJDARY-E101 |