All MIBs › FJDARY-E101 › fjdaryRluInfoTable0
fjdaryRluInfoTable0
Module: FJDARY-E101
OID (symbolic): FJDARY-E101::fjdaryRluInfoTable0
OID (numeric): 1.3.6.1.4.1.211.1.21.1.101.3.4.2.1.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The value of this object indicates the RLU information #0 of this
system.
byte 0 byte 1 byte 2 byte 3
+------------+------------+------------+------------+
0x00| RLUN | Status |
+------------+------------+------------+------------+
0x04| Def CM MID | Curr CM MID| Reserved |
+------------+------------+------------+------------+
0x08| RAID Level | RLU Mode | Blockade | RLU Enable |
+------------+------------+------------+------------+
0x0c| Reserved |
+------------+------------+------------+------------+
0x10| RLBA Count |
+ +
0x14| |
+------------+------------+------------+------------+
0x18| Stripe Depth |
+------------+------------+------------+------------+
0x1c| Stripe Size |
+------------+------------+------------+------------+
0x20| Expanded RLUN | Temporary RLUN |
+------------+------------+------------+------------+
0x24| Reserved (12 bytes) |
~ ~
0x2c| |
+------------+------------+------------+------------+
0x30| SLU Count | Reserved |
+------------+------------+------------+------------+What is fjdaryRluInfoTable0?
Packs this RAID group's core configuration: its number, status, RAID level, default/current owning controller, stripe depth and size, total block count, and how many SLUs are carved from it. Admins parse this to check a RAID group's health and RAID level (e.g., confirming RAID5 vs RAID6) without a separate storage-management console.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.211.1.21.1.101.3.4.2.1.2 snmpwalk -v2c -c public <target> FJDARY-E101::fjdaryRluInfoTable0
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.211.1.21.1.101.3.4.2.1.2.1 snmpget -v2c -c public <target> FJDARY-E101::fjdaryRluInfoTable0.1
Start monitoring Fujitsu ETERNUS DX100 S1 / E101-series disk array with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FJDARY-E101::fjdaryRluInfoTable0 OID value, configure state conditions and alerts, and monitor any Fujitsu ETERNUS DX100 S1 / E101-series disk array from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.211 | fujitsu | Alert-Definition-Originator-MIB |
| 1.3.6.1.4.1.211.1 | product | CFAB-MIB |
| 1.3.6.1.4.1.211.1.21 | storage | ETERNUS-OR30-SV-MIB |
| 1.3.6.1.4.1.211.1.21.1 | nsp | ETERNUS-OR30-SV-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.211.1.21.1.101 | fjdarye101 | FJDARY-E101 |
| 1.3.6.1.4.1.211.1.21.1.101.3 | fjdaryLconfig | FJDARY-E101 |
| 1.3.6.1.4.1.211.1.21.1.101.3.4 | fjdaryRlu | FJDARY-E101 |
| 1.3.6.1.4.1.211.1.21.1.101.3.4.2 | fjdaryRluTable | FJDARY-E101 |
| 1.3.6.1.4.1.211.1.21.1.101.3.4.2.1 | fjdaryRluEntry | FJDARY-E101 |
| 1.3.6.1.4.1.211.1.21.1.101.3.4.2.1.2 | fjdaryRluInfoTable0 | FJDARY-E101 |