FJDARY-E101 :: fjdaryPfdiInfo

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › FJDARY-E101 › fjdaryPfdiInfo

fjdaryPfdiInfo

Module: FJDARY-E101

OID (symbolic): FJDARY-E101::fjdaryPfdiInfo

OID (numeric): 1.3.6.1.4.1.211.1.21.1.101.5.3.2.1.2

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: The value of this object indicates the DI performance data.
         byte 0       byte 1       byte 2       byte 3
     +------------+------------+------------+------------+
 0x00| DI Port Info#0 (16 bytes)                         |
     +------------+------------+------------+------------+
 0x10| DI Port Info#1 (16 bytes)                         |
     +------------+------------+------------+------------+
DI Port Info:
         byte 0       byte 1       byte 2       byte 3
     +------------+------------+------------+------------+
 0x00| Read Command Count                                |
     +------------+------------+------------+------------+
 0x04| Write Command Count                               |
     +------------+------------+------------+------------+
 0x08| Read Block Count                                  |
     +------------+------------+------------+------------+
 0x0c| Write Block Count                                 |
     +------------+------------+------------+------------+

What is fjdaryPfdiInfo?

Packs read/write command and block counts for two backend drive-interface ports per table row. Admins use this to spot an overloaded or underperforming backend path to the disk shelves, distinct from the front-end OPEN-CA counters.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.211.1.21.1.101.5.3.2.1.2
snmpwalk -v2c -c public <target> FJDARY-E101::fjdaryPfdiInfo

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.211.1.21.1.101.5.3.2.1.2.1
snmpget -v2c -c public <target> FJDARY-E101::fjdaryPfdiInfo.1

Start monitoring Fujitsu ETERNUS DX100 S1 / E101-series disk array with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FJDARY-E101::fjdaryPfdiInfo OID value, configure state conditions and alerts, and monitor any Fujitsu ETERNUS DX100 S1 / E101-series disk array from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.211fujitsuAlert-Definition-Originator-MIB
1.3.6.1.4.1.211.1productCFAB-MIB
1.3.6.1.4.1.211.1.21storageETERNUS-OR30-SV-MIB
1.3.6.1.4.1.211.1.21.1nspETERNUS-OR30-SV-MIB
Numeric OIDNameModule
1.3.6.1.4.1.211.1.21.1.101fjdarye101FJDARY-E101
1.3.6.1.4.1.211.1.21.1.101.5fjdaryPerformanceFJDARY-E101
1.3.6.1.4.1.211.1.21.1.101.5.3fjdaryPfdiFJDARY-E101
1.3.6.1.4.1.211.1.21.1.101.5.3.2fjdaryPfdiTableFJDARY-E101
1.3.6.1.4.1.211.1.21.1.101.5.3.2.1fjdaryPfdiEntryFJDARY-E101
1.3.6.1.4.1.211.1.21.1.101.5.3.2.1.2fjdaryPfdiInfoFJDARY-E101