FJDARY-E101 :: fjdaryHostResponseInfoTable

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › FJDARY-E101 › fjdaryHostResponseInfoTable

fjdaryHostResponseInfoTable

Module: FJDARY-E101

OID (symbolic): FJDARY-E101::fjdaryHostResponseInfoTable

OID (numeric): 1.3.6.1.4.1.211.1.21.1.101.3.11.2.1.2

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: The value of this object indicates the host response information of
this system.
         byte 0       byte 1       byte 2       byte 3
     +------------+------------+------------+------------+
 0x00| Table No                | Valid Flag | Reserved   |
     +------------+------------+------------+------------+
 0x04| Host Response Name (16 bytes)                     |
     ~                                                   ~
 0x10|                                                   |
     +------------+------------+------------+------------+
 0x14| Reserved                                          |
     +------------+------------+------------+------------+
 0x18| SCC Mode   |Host Cmd T.O| Sense Ctrl              |
     +------------+------------+------------+------------+
 0x1c| Ope Mode   | Reserved                             |
     +------------+------------+------------+------------+
 0x20| Status Ctrl| Reserved                             |
     +------------+------------+------------+------------+
 0x24| Reserved (24 bytes)                               |
     ~                                                   ~
 0x3c|                                                   |
     +------------+------------+------------+------------+
 0x40|Inquiry Mode|Inquiry Type|Inquiry Ver.| Reserved   |
     +------------+------------+------------+------------+
 0x44| Reserved                                          |
     +------------+------------+------------+------------+
 0x48| Entry Sense| Entry Sense| Entry Sense| Entry Sense|
     |  Key#0     |  Code#0    |  SubCode#0 |  ConvBit#0 |
     +------------+------------+------------+------------+
 0x4c| ReportSense| ReportSense| ReportSense| ReportSense|
     |  Key#0     |  Code#0    |  SubCode#0 |  ConvBit#0 |
     +------------+------------+------------+------------+
     ~                                                   ~
     +------------+------------+------------+------------+
 0x80| Entry Sense| Entry Sense| Entry Sense| Entry Sense|
     |  Key#7     |  Code#7    |  SubCode#7 |  ConvBit#7 |
     +------------+------------+------------+------------+
 0x84| ReportSense| ReportSense| ReportSense| ReportSense|
     |  Key#7     |  Code#7    |  SubCode#7 |  ConvBit#7 |
     +------------+------------+------------+------------+
 0x88| Reserved                                          |
     +                                                   +
 0x8c|                                                   |
     +------------+------------+------------+------------+

What is fjdaryHostResponseInfoTable?

Packs one host-response profile's full configuration: its name, SCC mode, host command timeout, SCSI sense-handling and inquiry behavior settings, and up to eight custom SCSI sense-code translation entries. Storage admins configure and audit this when a specific host OS (assigned this profile via fjdaryHostwwnWWN or fjdaryHostiscsiDefine) requires non-default SCSI command handling to work correctly.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.211.1.21.1.101.3.11.2.1.2
snmpwalk -v2c -c public <target> FJDARY-E101::fjdaryHostResponseInfoTable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.211.1.21.1.101.3.11.2.1.2.1
snmpget -v2c -c public <target> FJDARY-E101::fjdaryHostResponseInfoTable.1

Start monitoring Fujitsu ETERNUS DX100 S1 / E101-series disk array with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FJDARY-E101::fjdaryHostResponseInfoTable OID value, configure state conditions and alerts, and monitor any Fujitsu ETERNUS DX100 S1 / E101-series disk array from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.211fujitsuAlert-Definition-Originator-MIB
1.3.6.1.4.1.211.1productCFAB-MIB
1.3.6.1.4.1.211.1.21storageETERNUS-OR30-SV-MIB
1.3.6.1.4.1.211.1.21.1nspETERNUS-OR30-SV-MIB
Numeric OIDNameModule
1.3.6.1.4.1.211.1.21.1.101fjdarye101FJDARY-E101
1.3.6.1.4.1.211.1.21.1.101.3fjdaryLconfigFJDARY-E101
1.3.6.1.4.1.211.1.21.1.101.3.11fjdaryHostResponseFJDARY-E101
1.3.6.1.4.1.211.1.21.1.101.3.11.2fjdaryHostResponseTableFJDARY-E101
1.3.6.1.4.1.211.1.21.1.101.3.11.2.1fjdaryHostResponseEntryFJDARY-E101
1.3.6.1.4.1.211.1.21.1.101.3.11.2.1.2fjdaryHostResponseInfoTableFJDARY-E101