All MIBs › FASTPATH-IPV6-TUNNEL-MIB › agentTunnelRemoteIP4Addr
agentTunnelRemoteIP4Addr
Module: FASTPATH-IPV6-TUNNEL-MIB
OID (symbolic): FASTPATH-IPV6-TUNNEL-MIB::agentTunnelRemoteIP4Addr
OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1.1.5
Node type: OBJECT-TYPE
Type: InetAddressIPv4
Access: read-write
Description: The address of the Remote endpoint of the tunnel i.e. the destination address used in the outer IP header. It is 0.0.0.0 if the tunnel is unknown or IPv6 address, or not a point to point link
What is agentTunnelRemoteIP4Addr?
This object holds the IPv4 address of the remote tunnel endpoint, used as the destination address in the outer IPv4 header; it reads 0.0.0.0 if the remote end is unknown, is an IPv6 address, or this isn't a point-to-point link. Admins configure it to point the tunnel at the far-end router's public IPv4 address. Setting agentTunnelRemoteIP4Addr to 198.51.100.10 would direct encapsulated IPv6 traffic to that remote gateway.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1.1.5 snmpwalk -v2c -c public <target> FASTPATH-IPV6-TUNNEL-MIB::agentTunnelRemoteIP4Addr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1.1.5.1 snmpget -v2c -c public <target> FASTPATH-IPV6-TUNNEL-MIB::agentTunnelRemoteIP4Addr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1.1.5.1 s <value>
Start monitoring Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (IPv6-over-IPv4 tunnels) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FASTPATH-IPV6-TUNNEL-MIB::agentTunnelRemoteIP4Addr OID value, configure state conditions and alerts, and monitor any Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (IPv6-over-IPv4 tunnels) from a single console.
OID Breakdown
Upper-level ancestors (17 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.674 | dell | ArrayManager-MIB |
| 1.3.6.1.4.1.674.10895 | dellLan | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000 | dellLanStandard | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000.2 | dellLanExtension | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132 | lvl7 | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1 | lvl7Products | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1 | fastPath | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27 | fastPathIpv6Tunnel | DNOS-IPV6-TUNNEL-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1 | agentTunnelIPV6Group | DNOS-IPV6-TUNNEL-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1 | agentTunnelIPV6Table | DNOS-IPV6-TUNNEL-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1.1 | agentTunnelIPV6Entry | DNOS-IPV6-TUNNEL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1.1.5 | agentTunnelRemoteIP4Addr | FASTPATH-IPV6-TUNNEL-MIB |