F10-Z-SERIES-CHASSIS-MIB :: chSysPortOperStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsF10-Z-SERIES-CHASSIS-MIBchSysPortOperStatus

chSysPortOperStatus

Module: F10-Z-SERIES-CHASSIS-MIB

OID (symbolic): F10-Z-SERIES-CHASSIS-MIB::chSysPortOperStatus

OID (numeric): 1.3.6.1.4.1.6027.3.25.1.2.5.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The operational status provides further condition of the port. If the chSysPortAdminStatus is 'up', the valid state is 'ready' - the card is present and ready and the chSysPortAdminStatus status is 'up'. 'portDown' - the port is down or not enabled. 'portProblem' - port hardware problems. 'cardProblem' - not used. Same as cardDown. 'cardDown' - the card is downed. 'notPresent' - the card is not present.

What is chSysPortOperStatus?

Reports the port's finer-grained operational condition beyond a simple up/down: 'ready' means the card is present and the port is admin-up and healthy, 'portDown' means the port itself is down or disabled, 'portProblem' flags a hardware issue on the port, 'cardDown'/'cardProblem' indicate the whole card is down, and 'notPresent' means the card is missing. Use this to distinguish a simple disabled port from an actual hardware fault.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.25.1.2.5.1.4
snmpwalk -v2c -c public <target> F10-Z-SERIES-CHASSIS-MIB::chSysPortOperStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.25.1.2.5.1.4.1
snmpget -v2c -c public <target> F10-Z-SERIES-CHASSIS-MIB::chSysPortOperStatus.1

Start monitoring Dell Force10 Z-Series high-density 10GbE/40GbE chassis switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the F10-Z-SERIES-CHASSIS-MIB::chSysPortOperStatus OID value, configure state conditions and alerts, and monitor any Dell Force10 Z-Series high-density 10GbE/40GbE chassis switch from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6027dellNetDELL-NETWORKING-SMI
1.3.6.1.4.1.6027.3dellNetMgmtDELL-NETWORKING-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6027.3.25f10ZSerChassisMibF10-Z-SERIES-CHASSIS-MIB
1.3.6.1.4.1.6027.3.25.1f10ZSerChassisObjectF10-Z-SERIES-CHASSIS-MIB
1.3.6.1.4.1.6027.3.25.1.2chSysObjectsF10-Z-SERIES-CHASSIS-MIB
1.3.6.1.4.1.6027.3.25.1.2.5chSysPortTableF10-Z-SERIES-CHASSIS-MIB
1.3.6.1.4.1.6027.3.25.1.2.5.1chSysPortEntryF10-Z-SERIES-CHASSIS-MIB
1.3.6.1.4.1.6027.3.25.1.2.5.1.4chSysPortOperStatusF10-Z-SERIES-CHASSIS-MIB