F10-CHASSIS-MIB :: chSlot1to16

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsF10-CHASSIS-MIBchSlot1to16

chSlot1to16

Module: F10-CHASSIS-MIB

OID (symbolic): F10-CHASSIS-MIB::chSlot1to16

OID (numeric): 1.3.6.1.4.1.6027.3.1.1.1.11

Node type: OBJECT-TYPE

Type: F10SlotState

Access: read-only

Description: This object has been obsoleted and will not
be supported by future Dell Networking OS Chassis. The
information here is for reference only.

This variable indicates the slot states.
Each slot occupies a bit. The value 1
indicates slot is in used and 0 indicates
the slot is empty.

   The placement of line cards and rpm cards
in a E1200 chassis are as follows :

    ( physical slot numbers )
            1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
            |           |      |                 |
            -------------      -------------------
                 |        | |           |
             line cards   | |       line card
                          | |
                          | + ----> RPM card
                          +-------> RPM card

The most significant bit is slot 1 and the
least significant bit is slot 16.

   The placement of line cards and rpm cards
in a E600 chassis are as follows :

    ( physical slot numbers )
            1 2 3 4 5 6 7 8 9
            |           |
            -------------
                 |        | |
             line cards   | |
                          | |
                          | + ----> RPM card
                          +-------> RPM card

The most significant bit is slot 1 and the
least significant bit is slot 9.

What is chSlot1to16?

An obsolete bitmap that once reported which of slots 1-16 were occupied by a line card or RPM, with the most significant bit representing slot 1. It's retained only for reference on older E1200/E600 chassis and is not supported on current Dell Networking OS hardware.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.1.1.1.11
snmpwalk -v2c -c public <target> F10-CHASSIS-MIB::chSlot1to16

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.1.1.1.11.1
snmpget -v2c -c public <target> F10-CHASSIS-MIB::chSlot1to16.1

Start monitoring Dell Force10 chassis switch/router (hardware inventory/environmental) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the F10-CHASSIS-MIB::chSlot1to16 OID value, configure state conditions and alerts, and monitor any Dell Force10 chassis switch/router (hardware inventory/environmental) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6027dellNetDELL-NETWORKING-SMI
1.3.6.1.4.1.6027.3dellNetMgmtDELL-NETWORKING-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6027.3.1f10ChassisMibF10-CHASSIS-MIB
1.3.6.1.4.1.6027.3.1.1f10ChassisMibObjectF10-CHASSIS-MIB
1.3.6.1.4.1.6027.3.1.1.1chObjectsF10-CHASSIS-MIB
1.3.6.1.4.1.6027.3.1.1.1.11chSlot1to16F10-CHASSIS-MIB