All MIBs › EdgeSwitch-ROUTING6-MIB › agentIpv6RouterAdvertisementHopLimitUnspecifiedMode
agentIpv6RouterAdvertisementHopLimitUnspecifiedMode
Module: EdgeSwitch-ROUTING6-MIB
OID (symbolic): EdgeSwitch-ROUTING6-MIB::agentIpv6RouterAdvertisementHopLimitUnspecifiedMode
OID (numeric): 1.3.6.1.4.1.4413.1.1.30.1.3.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object configures the router to send Router Advertisements on an interface with unspecified (0) Current Hop Limit value. This will tell the hosts on that link to ignore the Hop Limit from this Router.
What is agentIpv6RouterAdvertisementHopLimitUnspecifiedMode?
When enabled (default disabled), Router Advertisements from this interface carry an unspecified (0) Current Hop Limit value, telling hosts on that link to ignore the hop limit suggested by this router. It's used in specific designs where hosts should rely on their own default hop limit instead of one advertised by this device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.30.1.3.1.9 snmpwalk -v2c -c public <target> EdgeSwitch-ROUTING6-MIB::agentIpv6RouterAdvertisementHopLimitUnspecifiedMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.30.1.3.1.9.1 snmpget -v2c -c public <target> EdgeSwitch-ROUTING6-MIB::agentIpv6RouterAdvertisementHopLimitUnspecifiedMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.30.1.3.1.9.1 i <value>
Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv6 routing/RA config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-ROUTING6-MIB::agentIpv6RouterAdvertisementHopLimitUnspecifiedMode OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv6 routing/RA config) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1 | enet | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1.1 | fastPath | EdgeSwitch-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.1.1.30 | fastPathRoutingIpv6 | EdgeSwitch-ROUTING6-MIB |
| 1.3.6.1.4.1.4413.1.1.30.1 | agentIpv6Group | EdgeSwitch-ROUTING6-MIB |
| 1.3.6.1.4.1.4413.1.1.30.1.3 | agentIpv6RouterAdvertisementTable | EdgeSwitch-ROUTING6-MIB |
| 1.3.6.1.4.1.4413.1.1.30.1.3.1 | agentIpv6RouterAdvertisementEntry | EdgeSwitch-ROUTING6-MIB |
| 1.3.6.1.4.1.4413.1.1.30.1.3.1.9 | agentIpv6RouterAdvertisementHopLimitUnspecifiedMode | EdgeSwitch-ROUTING6-MIB |