EdgeSwitch-ROUTING6-MIB :: agentIpv6NeighborsDynamicRenew

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-ROUTING6-MIB › agentIpv6NeighborsDynamicRenew

agentIpv6NeighborsDynamicRenew

Module: EdgeSwitch-ROUTING6-MIB

OID (symbolic): EdgeSwitch-ROUTING6-MIB::agentIpv6NeighborsDynamicRenew

OID (numeric): 1.3.6.1.4.1.4413.1.1.30.1.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Enables/disables the periodic NUD (neighbor unreachability detection) to be run on the existing IPv6 neighbor entries based on the activity of the entries in the hardware. If the setting is disabled, only those entries that are actively used in the hardware are triggered for NUD. If the setting is enabled, all the entries are triggered for NUD irrespective of their usage in the hardware.

What is agentIpv6NeighborsDynamicRenew?

Enables or disables (default disabled) periodic Neighbor Unreachability Detection (NUD) re-verification for existing IPv6 neighbor entries based on hardware activity; when disabled, only entries actively used in hardware get re-verified, while enabled forces NUD on all entries regardless of usage. Enabling it trades extra NUD traffic for fresher neighbor-reachability state across the whole neighbor table.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.30.1.14
snmpwalk -v2c -c public <target> EdgeSwitch-ROUTING6-MIB::agentIpv6NeighborsDynamicRenew

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.30.1.14.1
snmpget -v2c -c public <target> EdgeSwitch-ROUTING6-MIB::agentIpv6NeighborsDynamicRenew.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.30.1.14.1 i <value>

Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv6 routing/RA config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-ROUTING6-MIB::agentIpv6NeighborsDynamicRenew OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv6 routing/RA config) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.30fastPathRoutingIpv6EdgeSwitch-ROUTING6-MIB
1.3.6.1.4.1.4413.1.1.30.1agentIpv6GroupEdgeSwitch-ROUTING6-MIB
1.3.6.1.4.1.4413.1.1.30.1.14agentIpv6NeighborsDynamicRenewEdgeSwitch-ROUTING6-MIB