All MIBs › EdgeSwitch-ROUTING6-MIB › agentIpv6NUDBackoffMultiple
agentIpv6NUDBackoffMultiple
Module: EdgeSwitch-ROUTING6-MIB
OID (symbolic): EdgeSwitch-ROUTING6-MIB::agentIpv6NUDBackoffMultiple
OID (numeric): 1.3.6.1.4.1.4413.1.1.30.1.18
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The exponential backoff multiple to be used in the calculation of the next timeout value for Neighbor Solicitation transmission during NUD (neighbor unreachabililty detection) following the exponential backoff algorithm. The next timeout value is limited to a maximum value of 60 seconds if the value with exponential backoff calculation is greater than 60 seconds.
What is agentIpv6NUDBackoffMultiple?
The exponential backoff multiple (1-5, default 1) used to calculate each next retransmission timeout for Neighbor Solicitations during NUD, capped at a maximum of 60 seconds even if the calculated backoff would be longer. Raising it spaces out retries further apart as NUD keeps failing, reducing solicitation traffic against an unresponsive neighbor.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.30.1.18 snmpwalk -v2c -c public <target> EdgeSwitch-ROUTING6-MIB::agentIpv6NUDBackoffMultiple
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.30.1.18.1 snmpget -v2c -c public <target> EdgeSwitch-ROUTING6-MIB::agentIpv6NUDBackoffMultiple.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.30.1.18.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> agentIpv6NUDBackoffMultiple.1
Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv6 routing/RA config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-ROUTING6-MIB::agentIpv6NUDBackoffMultiple OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv6 routing/RA config) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1 | enet | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1.1 | fastPath | EdgeSwitch-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.1.1.30 | fastPathRoutingIpv6 | EdgeSwitch-ROUTING6-MIB |
| 1.3.6.1.4.1.4413.1.1.30.1 | agentIpv6Group | EdgeSwitch-ROUTING6-MIB |
| 1.3.6.1.4.1.4413.1.1.30.1.18 | agentIpv6NUDBackoffMultiple | EdgeSwitch-ROUTING6-MIB |