EdgeSwitch-ROUTING6-MIB :: agentIpv6AddrPrefixAutonomousFlag

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-ROUTING6-MIB › agentIpv6AddrPrefixAutonomousFlag

agentIpv6AddrPrefixAutonomousFlag

Module: EdgeSwitch-ROUTING6-MIB

OID (symbolic): EdgeSwitch-ROUTING6-MIB::agentIpv6AddrPrefixAutonomousFlag

OID (numeric): 1.3.6.1.4.1.4413.1.1.30.1.4.1.4

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to autoconfigure a local interface address.

What is agentIpv6AddrPrefixAutonomousFlag?

True if this prefix can be used for stateless autonomous address configuration, letting a host combine it with its own interface identifier to form an address; false means hosts must not self-configure an address from this prefix. Admins set this false on prefixes meant only for router-assigned or DHCPv6-managed addressing.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.30.1.4.1.4
snmpwalk -v2c -c public <target> EdgeSwitch-ROUTING6-MIB::agentIpv6AddrPrefixAutonomousFlag

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.30.1.4.1.4.1
snmpget -v2c -c public <target> EdgeSwitch-ROUTING6-MIB::agentIpv6AddrPrefixAutonomousFlag.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.30.1.4.1.4.1 s <value>

Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv6 routing/RA config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-ROUTING6-MIB::agentIpv6AddrPrefixAutonomousFlag OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv6 routing/RA config) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.30fastPathRoutingIpv6EdgeSwitch-ROUTING6-MIB
1.3.6.1.4.1.4413.1.1.30.1agentIpv6GroupEdgeSwitch-ROUTING6-MIB
1.3.6.1.4.1.4413.1.1.30.1.4agentIpv6AddrPrefixTableEdgeSwitch-ROUTING6-MIB
1.3.6.1.4.1.4413.1.1.30.1.4.1agentIpv6AddrPrefixEntryEdgeSwitch-ROUTING6-MIB
1.3.6.1.4.1.4413.1.1.30.1.4.1.4agentIpv6AddrPrefixAutonomousFlagEdgeSwitch-ROUTING6-MIB