EdgeSwitch-ROUTING6-MIB :: agentIpv6AddrPrefixAdvValidLifetime

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-ROUTING6-MIB › agentIpv6AddrPrefixAdvValidLifetime

agentIpv6AddrPrefixAdvValidLifetime

Module: EdgeSwitch-ROUTING6-MIB

OID (symbolic): EdgeSwitch-ROUTING6-MIB::agentIpv6AddrPrefixAdvValidLifetime

OID (numeric): 1.3.6.1.4.1.4413.1.1.30.1.4.1.6

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity.

The address generated from an invalidated prefix should not appear as the destination or source address of a packet.

What is agentIpv6AddrPrefixAdvValidLifetime?

The valid lifetime, in seconds, advertised for this prefix, after which addresses derived from it become invalid and unusable as either source or destination (a value of 4,294,967,295 means infinite). Admins set this to control how long hosts continue trusting an address derived from a prefix that may be renumbered.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.30.1.4.1.6
snmpwalk -v2c -c public <target> EdgeSwitch-ROUTING6-MIB::agentIpv6AddrPrefixAdvValidLifetime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.30.1.4.1.6.1
snmpget -v2c -c public <target> EdgeSwitch-ROUTING6-MIB::agentIpv6AddrPrefixAdvValidLifetime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.30.1.4.1.6.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> agentIpv6AddrPrefixAdvValidLifetime.1

Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv6 routing/RA config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-ROUTING6-MIB::agentIpv6AddrPrefixAdvValidLifetime OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv6 routing/RA config) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.30fastPathRoutingIpv6EdgeSwitch-ROUTING6-MIB
1.3.6.1.4.1.4413.1.1.30.1agentIpv6GroupEdgeSwitch-ROUTING6-MIB
1.3.6.1.4.1.4413.1.1.30.1.4agentIpv6AddrPrefixTableEdgeSwitch-ROUTING6-MIB
1.3.6.1.4.1.4413.1.1.30.1.4.1agentIpv6AddrPrefixEntryEdgeSwitch-ROUTING6-MIB
1.3.6.1.4.1.4413.1.1.30.1.4.1.6agentIpv6AddrPrefixAdvValidLifetimeEdgeSwitch-ROUTING6-MIB