EdgeSwitch-ROUTING6-MIB :: agentIpv6AddrPrefixAdvPreferredLifetime

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-ROUTING6-MIB › agentIpv6AddrPrefixAdvPreferredLifetime

agentIpv6AddrPrefixAdvPreferredLifetime

Module: EdgeSwitch-ROUTING6-MIB

OID (symbolic): EdgeSwitch-ROUTING6-MIB::agentIpv6AddrPrefixAdvPreferredLifetime

OID (numeric): 1.3.6.1.4.1.4413.1.1.30.1.4.1.5

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity.

The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected.

What is agentIpv6AddrPrefixAdvPreferredLifetime?

The preferred lifetime, in seconds, advertised for this prefix, after which addresses derived from it become deprecated (a value of 4,294,967,295 means infinite). Once deprecated, a host shouldn't use an address from this prefix as a new source address, though it can still receive traffic on it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.30.1.4.1.5
snmpwalk -v2c -c public <target> EdgeSwitch-ROUTING6-MIB::agentIpv6AddrPrefixAdvPreferredLifetime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.30.1.4.1.5.1
snmpget -v2c -c public <target> EdgeSwitch-ROUTING6-MIB::agentIpv6AddrPrefixAdvPreferredLifetime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.30.1.4.1.5.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> agentIpv6AddrPrefixAdvPreferredLifetime.1

Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv6 routing/RA config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-ROUTING6-MIB::agentIpv6AddrPrefixAdvPreferredLifetime OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv6 routing/RA config) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.30fastPathRoutingIpv6EdgeSwitch-ROUTING6-MIB
1.3.6.1.4.1.4413.1.1.30.1agentIpv6GroupEdgeSwitch-ROUTING6-MIB
1.3.6.1.4.1.4413.1.1.30.1.4agentIpv6AddrPrefixTableEdgeSwitch-ROUTING6-MIB
1.3.6.1.4.1.4413.1.1.30.1.4.1agentIpv6AddrPrefixEntryEdgeSwitch-ROUTING6-MIB
1.3.6.1.4.1.4413.1.1.30.1.4.1.5agentIpv6AddrPrefixAdvPreferredLifetimeEdgeSwitch-ROUTING6-MIB