EdgeSwitch-QOS-AUTOVOIP-MIB

All MIBs › EdgeSwitch-QOS-AUTOVOIP-MIB

Organization: Broadcom Inc

Last Updated: 2012--0-2-

Category: Quality of Service, Technology: QoS, Vendor: EdgeSwitch/Ubiquiti

Description: Ubiquiti EdgeSwitch auto-VoIP QoS MIB for automatically prioritizing VoIP traffic based on protocol detection.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EdgeSwitch-QOS-AUTOVOIP-MIB?

EdgeSwitch-QOS-AUTOVOIP-MIB is a Ubiquiti Networks vendor MIB for the EdgeSwitch product line's Auto-VoIP QoS feature package, which automatically detects and prioritizes VoIP traffic without manual ACL configuration. It exposes per-interface Auto-VoIP configuration, including VLAN assignment, OUI-based (vendor MAC prefix) phone detection, and protocol-based detection with configurable priority/remarking schemes, organized in a per-interface table. As a configuration/software-status MIB it lets an operator confirm Auto-VoIP is enabled and correctly detecting phones on each port — checking agentAutoVoIPProtocolPortStatus/agentAutoVoIPOUIPortStatus to catch a port where VoIP detection has silently stopped working, which would manifest as call-quality degradation. It depends on standard QoS/CoS concepts (802.1p, DSCP) referenced implicitly through its priority/remark objects. It's typically deployed on Ubiquiti EdgeSwitch devices in small-to-midsize networks carrying VoIP phone traffic that need automatic call-quality prioritization without hand-tuned QoS policies. Engineers can download the EdgeSwitch-QOS-AUTOVOIP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EdgeSwitch-QOS-AUTOVOIP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ubiquiti EdgeSwitch (managed Ethernet switch)

Monitoring Examples

An admin would poll agentAutoVoIPTable/agentAutoVoIPEntry indexed by agentAutoVoIPIntfIndex to check agentAutoVoIPProtocolMode and agentAutoVoIPOUIMode on each port, confirming whether protocol-based or OUI-based VoIP detection is active. Checking agentAutoVoIPProtocolPortStatus and agentAutoVoIPOUIPortStatus would reveal whether a specific port is currently detecting VoIP traffic; a port with phones connected but showing an inactive detection status would explain unprioritized, choppy voice traffic on that port.

What Can Be Monitored

Auto-VoIP detection mode per port
VoIP detection status per port
OUI-based priority configuration
protocol-based priority scheme
VLAN assignment for VoIP

Imported Objects

From EdgeSwitch-QOS-MIB

fastPathQOS

MODULE-IDENTITY

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
fastPathQOSAUTOVOIP	1.3.6.1.4.1.4413.1.1.3.4			The MIB definitions for Quality of Service - VoIP Flex package.
agentAutoVoIPCfgGroup	1.3.6.1.4.1.4413.1.1.3.4.1
INT agentAutoVoIPVLAN	1.3.6.1.4.1.4413.1.1.3.4.1.1	INTEGER	read-write	The VLAN to which all VoIP traffic is mapped to.
INT agentAutoVoIPOUIPriority	1.3.6.1.4.1.4413.1.1.3.4.1.2	INTEGER	read-write	The priority to which all VoIP traffic with known OUI is mapped to.
INT agentAutoVoIPProtocolPriScheme	1.3.6.1.4.1.4413.1.1.3.4.1.3	INTEGER	read-write	The priotization scheme which is used to priritize the voice data.
U32 agentAutoVoIPProtocolTcOrRemarkValue	1.3.6.1.4.1.4413.1.1.3.4.1.4	Unsigned32	read-write	If 'agentAutoVoIPProtocolPriScheme' is traffic class, then the object 'agentAutoVoIPProtocolTcOrRemarkValue' is CoS Queue value to which all VoIP traffic is mapped to. if 'agentAutoVoIPProtocolPriScheme' is remark, then the object 'agentAutoVoIPProtocolTcOrRemarkValue' is 802.1p priority to which all VoIP traffic is remarked at the ingress port. This is used by Protocol based Auto VoIP
agentAutoVoIPTable	1.3.6.1.4.1.4413.1.1.3.4.1.5		not-accessible	A table providing configuration of Auto VoIP Profile.
agentAutoVoIPEntry	1.3.6.1.4.1.4413.1.1.3.4.1.5.1		not-accessible	Auto VoIP Profile configuration for a port.
NUM agentAutoVoIPIntfIndex	1.3.6.1.4.1.4413.1.1.3.4.1.5.1.1	InterfaceIndex	not-accessible	This is a unique index for an entry in the agentAutoVoIPTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTable. A value of zero represents global configuration, which in turn causes all interface entries to be updated for a set operation, or reflects the most recent global setting for a get operation.
INT agentAutoVoIPProtocolMode	1.3.6.1.4.1.4413.1.1.3.4.1.5.1.2	INTEGER	read-write	Enables / disables AutoVoIP Protocol profile on an interface.
INT agentAutoVoIPOUIMode	1.3.6.1.4.1.4413.1.1.3.4.1.5.1.3	INTEGER	read-write	Enables / disables AutoVoIP OUI profile on an interface.
INT agentAutoVoIPProtocolPortStatus	1.3.6.1.4.1.4413.1.1.3.4.1.5.1.4	INTEGER	read-only	AutoVoIP protocol profile operational status of an interface.
INT agentAutoVoIPOUIPortStatus	1.3.6.1.4.1.4413.1.1.3.4.1.5.1.5	INTEGER	read-only	AutoVoIP OUI profile operational status of an interface.
agentAutoVoIPOUITable	1.3.6.1.4.1.4413.1.1.3.4.1.6		not-accessible	A table providing configuration of Auto VoIP Profile.
agentAutoVoIPOUIEntry	1.3.6.1.4.1.4413.1.1.3.4.1.6.1		not-accessible	Auto VoIP Profile OUI configuration.
I32 agentAutoVoIPOUIIndex	1.3.6.1.4.1.4413.1.1.3.4.1.6.1.1	Integer32	read-only	The Auto VoIP OUI table index.
OCT agentAutoVoIPOUI	1.3.6.1.4.1.4413.1.1.3.4.1.6.1.2	OCTET STRING	read-write	The Organizationally Unique Identifier (OUI), as defined in IEEE std 802-2001, is a 24 bit (three octets) globally unique assigned number referenced by various standards, of the information received from the remote system.
OCT agentAutoVoIPOUIDesc	1.3.6.1.4.1.4413.1.1.3.4.1.6.1.3	OCTET STRING	read-write	The Description of the Organizationally Unique Identifier (OUI), as defined in IEEE std 802-2001(up to 32 characters)
ROW agentAutoVoIPOUIRowStatus	1.3.6.1.4.1.4413.1.1.3.4.1.6.1.4	RowStatus	read-create	The row status variable is used according to installation and removal conventions for conceptual rows.
agentAutoVoIPSessionTable	1.3.6.1.4.1.4413.1.1.3.4.1.7		not-accessible	A table providing configuration of Auto VoIP Profile.
agentAutoVoIPSessionEntry	1.3.6.1.4.1.4413.1.1.3.4.1.7.1		not-accessible	Auto VoIP Session Table.
INT agentAutoVoIPSessionIndex	1.3.6.1.4.1.4413.1.1.3.4.1.7.1.1	INTEGER	read-only	The Auto VoIP session index.
IP agentAutoVoIPSourceIP	1.3.6.1.4.1.4413.1.1.3.4.1.7.1.2	IpAddress	read-only	The source IP address of the VoIP session.
IP agentAutoVoIPDestinationIP	1.3.6.1.4.1.4413.1.1.3.4.1.7.1.3	IpAddress	read-only	The destination IP address of the VoIP session.
INT agentAutoVoIPSourceL4Port	1.3.6.1.4.1.4413.1.1.3.4.1.7.1.4	INTEGER	read-only	The source L4 Port of the VoIP session.
INT agentAutoVoIPDestinationL4Port	1.3.6.1.4.1.4413.1.1.3.4.1.7.1.5	INTEGER	read-only	The destination L4 Port of the VoIP session.
INT agentAutoVoIPProtocol	1.3.6.1.4.1.4413.1.1.3.4.1.7.1.6	INTEGER	read-only	The Protocol of the VoIP session.

RFC description

Quality of Service (QoS) management for automatic VoIP detection and prioritization on EdgeSwitch switches. Configures VoIP traffic mapping to specific VLANs and priority levels.

Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (Auto-VoIP QoS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EdgeSwitch-QOS-AUTOVOIP-MIB

What Is EdgeSwitch-QOS-AUTOVOIP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description