EdgeSwitch-IPV6-TUNNEL-MIB :: agentTunnelRemoteIP4Addr

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-IPV6-TUNNEL-MIB › agentTunnelRemoteIP4Addr

agentTunnelRemoteIP4Addr

Module: EdgeSwitch-IPV6-TUNNEL-MIB

OID (symbolic): EdgeSwitch-IPV6-TUNNEL-MIB::agentTunnelRemoteIP4Addr

OID (numeric): 1.3.6.1.4.1.4413.1.1.27.1.1.1.5

Node type: OBJECT-TYPE

Type: InetAddressIPv4

Access: read-write

Description: The address of the Remote endpoint of the tunnel i.e. the destination address used in the outer IP header. It is 0.0.0.0 if the tunnel is unknown or IPv6 address, or not a point to point link

What is agentTunnelRemoteIP4Addr?

This value is the IPv4 address of the tunnel's remote endpoint, used as the destination address in the outer IPv4 header; it is 0.0.0.0 if the tunnel isn't a point-to-point IPv4 link or the peer address is unknown/IPv6. An admin configures it to point the tunnel at a specific remote router's IPv4 address. For example, setting this to 198.51.100.5 would direct tunneled traffic to that peer's IPv4 address, while a 6to4 tunnel would typically leave it unset.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.27.1.1.1.5
snmpwalk -v2c -c public <target> EdgeSwitch-IPV6-TUNNEL-MIB::agentTunnelRemoteIP4Addr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.27.1.1.1.5.1
snmpget -v2c -c public <target> EdgeSwitch-IPV6-TUNNEL-MIB::agentTunnelRemoteIP4Addr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.27.1.1.1.5.1 s <value>

Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv6-over-IPv4 tunnels) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-IPV6-TUNNEL-MIB::agentTunnelRemoteIP4Addr OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv6-over-IPv4 tunnels) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.27fastPathIpv6TunnelEdgeSwitch-IPV6-TUNNEL-MIB
1.3.6.1.4.1.4413.1.1.27.1agentTunnelIPV6GroupEdgeSwitch-IPV6-TUNNEL-MIB
1.3.6.1.4.1.4413.1.1.27.1.1agentTunnelIPV6TableEdgeSwitch-IPV6-TUNNEL-MIB
1.3.6.1.4.1.4413.1.1.27.1.1.1agentTunnelIPV6EntryEdgeSwitch-IPV6-TUNNEL-MIB
1.3.6.1.4.1.4413.1.1.27.1.1.1.5agentTunnelRemoteIP4AddrEdgeSwitch-IPV6-TUNNEL-MIB