All MIBs › EXTREME-MPLS-TE-MIB › mplsTunnelRedundancyType
mplsTunnelRedundancyType
Module: EXTREME-MPLS-TE-MIB
OID (symbolic): EXTREME-MPLS-TE-MIB::mplsTunnelRedundancyType
OID (numeric): 1.3.6.1.4.1.1916.1.37.2.2.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Identifies the tunnel redundancy type associated with this tunnel instance. A value of primary(1) or secondary(2) MAY be assigned by the network administrator or by an SNMP manager at the time of setting up the tunnel.
What is mplsTunnelRedundancyType?
This value marks whether an MPLS TE tunnel instance is designated the primary path or the secondary backup path within a redundancy group. An admin assigns this when setting up two tunnels as a protected pair, so the network knows which one should carry traffic under normal conditions and which is the standby. Setting this to secondary(2) on a backup tunnel would mark it as the standby path that only becomes active if the primary tunnel fails.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1916.1.37.2.2.1.1.1 snmpwalk -v2c -c public <target> EXTREME-MPLS-TE-MIB::mplsTunnelRedundancyType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1916.1.37.2.2.1.1.1.1 snmpget -v2c -c public <target> EXTREME-MPLS-TE-MIB::mplsTunnelRedundancyType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1916.1.37.2.2.1.1.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mplsTunnelRedundancyType.1
Start monitoring Extreme Networks MPLS-capable router/switch (MPLS-TE tunnel extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EXTREME-MPLS-TE-MIB::mplsTunnelRedundancyType OID value, configure state conditions and alerts, and monitor any Extreme Networks MPLS-capable router/switch (MPLS-TE tunnel extensions) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1916 | extreme | A3COM51-SS9000SX |
| 1.3.6.1.4.1.1916.1 | extremeAgent | EXTREME-BASE-MIB |
| 1.3.6.1.4.1.1916.1.37 | extremeMplsMIB | EXTREME-MPLS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1916.1.37.2 | extremeMplsTeMIB | EXTREME-MPLS-TE-MIB |
| 1.3.6.1.4.1.1916.1.37.2.2 | extremeMplsTeObjects | EXTREME-MPLS-TE-MIB |
| 1.3.6.1.4.1.1916.1.37.2.2.1 | extremeMplsTunnelTable | EXTREME-MPLS-TE-MIB |
| 1.3.6.1.4.1.1916.1.37.2.2.1.1 | extremeMplsTunnelEntry | EXTREME-MPLS-TE-MIB |
| 1.3.6.1.4.1.1916.1.37.2.2.1.1.1 | mplsTunnelRedundancyType | EXTREME-MPLS-TE-MIB |