EXP-DOCS-CABLE-DEVICE-MIB :: docsDevSwAdminStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsEXP-DOCS-CABLE-DEVICE-MIBdocsDevSwAdminStatus

docsDevSwAdminStatus

Module: EXP-DOCS-CABLE-DEVICE-MIB

OID (symbolic): EXP-DOCS-CABLE-DEVICE-MIB::docsDevSwAdminStatus

OID (numeric): 1.3.6.1.3.83.1.3.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: If set to upgradeFromMgt(1), the device will initiate a TFTP software image download using docsDevSwFilename. After successfully receiving an image, the device will set its state to ignoreProvisioningUpgrade(3) and reboot. If the download process is interrupted by a reset or power failure, the device will load the previous image and, after re-initialization, continue to attempt loading the image specified in docsDevSwFilename.

If set to allowProvisioningUpgrade(2), the device will use the software version information supplied by the provisioning server when next rebooting (this does not cause a reboot).

When set to ignoreProvisioningUpgrade(3), the device will disregard software image upgrade information from the provisioning server.

Note that reading this object can return upgradeFromMgt(1). This indicates that a software download is currently in progress, and that the device will reboot after successfully receiving an image.

At initial startup, this object has the default value of allowProvisioningUpgrade(2).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.3.83.1.3.3
snmpwalk -v2c -c public <target> EXP-DOCS-CABLE-DEVICE-MIB::docsDevSwAdminStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.3.83.1.3.3.1
snmpget -v2c -c public <target> EXP-DOCS-CABLE-DEVICE-MIB::docsDevSwAdminStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.3.83.1.3.3.1 i <value>

Start monitoring DOCSIS/MCNS-compliant cable modem or CMTS (experimental pre-standard MIB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EXP-DOCS-CABLE-DEVICE-MIB::docsDevSwAdminStatus OID value, configure state conditions and alerts, and monitor any DOCSIS/MCNS-compliant cable modem or CMTS (experimental pre-standard MIB) from a single console.

OID Breakdown

Upper-level ancestors (5 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.3experimentalAXON-MIB
Numeric OIDNameModule
1.3.6.1.3.83docsDevEXP-DOCS-CABLE-DEVICE-MIB
1.3.6.1.3.83.1docsDevMIBObjectsEXP-DOCS-CABLE-DEVICE-MIB
1.3.6.1.3.83.1.3docsDevSoftwareEXP-DOCS-CABLE-DEVICE-MIB
1.3.6.1.3.83.1.3.3docsDevSwAdminStatusEXP-DOCS-CABLE-DEVICE-MIB