EXALINK-FUSION-MIB

All MIBs › EXALINK-FUSION-MIB

Organization: Exablaze

Last Updated: 2015-10-20

Category: Device Management, Technology: Switching/L2, Vendor: Exablaze, Vendor: Extreme Networks

Description: Manages Exablaze ExaLink Fusion chassis switch hardware, ports, and performance statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EXALINK-FUSION-MIB?

EXALINK-FUSION-MIB is a vendor-specific MIB for Exablaze's ExaLink Fusion chassis switch, a low-latency Ethernet switching platform, exposing system identity information alongside line-card and pluggable-module inventory. It provides objects for chassis serial number, firmware/software version, and board identification, plus tables enumerating installed line cards and modules with their names and board details, and sensor data. This is a hardware/software status MIB: fusionInfoVersion and fusionInfoSoftware expose the running firmware/software version for compatibility and upgrade tracking, fusionSensor covers environmental health, and the fusionLineCardTable/fusionModuleTable let an operator confirm that every expected line card and module is physically present, correctly identified, and populated in its slot. There is no explicit dependency on other MIBs apparent from the description. It is deployed in financial trading and other ultra-low-latency network environments using ExaLink Fusion switch chassis. Engineers can download the EXALINK-FUSION-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EXALINK-FUSION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Exablaze ExaLink Fusion chassis switch

Monitoring Examples

An operator would poll fusionInfoSerial, fusionInfoVersion, and fusionInfoSoftware to confirm the chassis's identity and currently running firmware/software build, and walk fusionLineCardTable/fusionLineCard by fusionLineCardIndex to check fusionLineCardName and fusionLineCardBoard for each installed line card. Similarly, fusionModuleTable/fusionModule keyed by fusionModuleIndex reveals installed pluggable modules; a missing expected line-card or module entry, or an unexpected board identifier, would indicate a hardware slot fault or a card that failed to be detected. fusionSensor readings would be checked for environmental anomalies such as overheating.

What Can Be Monitored

chassis serial number
firmware/software version
line card inventory and board identity
pluggable module inventory
environmental sensor readings

Imported Objects

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

TruthValue

How to Use in IPNetwork Monitor

Example using fusionSysInfoLoadAverage OID:

Select an Exablaze ExaLink Fusion chassis switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type fusionSysInfoLoadAverage into the Find box to locate it in the OID tree, then select it and click OK. The 1, 5 and 15 minute load averages multipled by 100. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the value drifts significantly from its normal baseline, since an unexpected change often points to a real underlying issue. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
exaFusion	1.3.6.1.4.1.43296.3			Added fusion sysinfo
fusionInfo	1.3.6.1.4.1.43296.3.1
STR fusionInfoSerial	1.3.6.1.4.1.43296.3.1.1	SnmpAdminString	read-only	Serial number
STR fusionInfoVersion	1.3.6.1.4.1.43296.3.1.2	SnmpAdminString	read-only	Software version number
STR fusionInfoBoard	1.3.6.1.4.1.43296.3.1.3	SnmpAdminString	read-only	Hardware type
STR fusionInfoSoftware	1.3.6.1.4.1.43296.3.1.4	SnmpAdminString	read-only	Software date stamp
fusionLineCardTable	1.3.6.1.4.1.43296.3.1.5		not-accessible	Table of line card information
fusionLineCard	1.3.6.1.4.1.43296.3.1.5.1		not-accessible	Line card information
I32 fusionLineCardIndex	1.3.6.1.4.1.43296.3.1.5.1.1	Integer32	read-only	Line card index
STR fusionLineCardName	1.3.6.1.4.1.43296.3.1.5.1.2	SnmpAdminString	read-only	Line card name
STR fusionLineCardBoard	1.3.6.1.4.1.43296.3.1.5.1.3	SnmpAdminString	read-only	Line card hardware type
fusionModuleTable	1.3.6.1.4.1.43296.3.1.6		not-accessible	Table of internal modules
fusionModule	1.3.6.1.4.1.43296.3.1.6.1		not-accessible	Internal module information
I32 fusionModuleIndex	1.3.6.1.4.1.43296.3.1.6.1.1	Integer32	read-only	Internal module index
STR fusionModuleName	1.3.6.1.4.1.43296.3.1.6.1.2	SnmpAdminString	read-only	Internal module name
STR fusionModuleBoard	1.3.6.1.4.1.43296.3.1.6.1.3	SnmpAdminString	read-only	Internal module hardware type
STR fusionModuleFunction	1.3.6.1.4.1.43296.3.1.6.1.4	SnmpAdminString	read-only	Current internal module firmware
fusionSysInfo	1.3.6.1.4.1.43296.3.1.7
I32 fusionSysInfoLoadAverageEx	1.3.6.1.4.1.43296.3.1.7.1	Integer32	read-only	The 1, 5 and 15 minute load averages multipled by 100
I32 fusionSysInfoAvailMem	1.3.6.1.4.1.43296.3.1.7.2	Integer32	read-only	System available memory in bytes
I32 fusionSysInfoNumProcesses	1.3.6.1.4.1.43296.3.1.7.3	Integer32	read-only	The number of current processes
fusionSensor	1.3.6.1.4.1.43296.3.2
fusionTempSensorTable	1.3.6.1.4.1.43296.3.2.1		not-accessible	Table of temperature sensors
fusionTempSensor	1.3.6.1.4.1.43296.3.2.1.1		not-accessible	Temperature sensor
I32 fusionTempSensorIndex	1.3.6.1.4.1.43296.3.2.1.1.1	Integer32	read-only	Temperature sensor index
STR fusionTempSensorName	1.3.6.1.4.1.43296.3.2.1.1.2	SnmpAdminString	read-only	Temperature sensor name
I32 fusionTempSensorValue	1.3.6.1.4.1.43296.3.2.1.1.3	Integer32	read-only	Current reading of temperature sensor
fusionFanSensorTable	1.3.6.1.4.1.43296.3.2.2		not-accessible	Table of fan sensors
fusionFanSensor	1.3.6.1.4.1.43296.3.2.2.1		not-accessible	Fan sensor
I32 fusionFanSensorIndex	1.3.6.1.4.1.43296.3.2.2.1.1	Integer32	read-only	Fan sensor index
STR fusionFanSensorName	1.3.6.1.4.1.43296.3.2.2.1.2	SnmpAdminString	read-only	Fan sensor name
I32 fusionFanSensorValue	1.3.6.1.4.1.43296.3.2.2.1.3	Integer32	read-only	Current reading of fan sensor
fusionPsuTable	1.3.6.1.4.1.43296.3.3		not-accessible	Table of power supplies
fusionPsu	1.3.6.1.4.1.43296.3.3.1		not-accessible	Power supply information
I32 fusionPsuIndex	1.3.6.1.4.1.43296.3.3.1.1	Integer32	read-only	Power supply index
STR fusionPsuType	1.3.6.1.4.1.43296.3.3.1.2	SnmpAdminString	read-only	Power supply manufacturer and model number
T/F fusionPsuPresent	1.3.6.1.4.1.43296.3.3.1.3	TruthValue	read-only	True if power supply is present
I32 fusionPsuTemperature	1.3.6.1.4.1.43296.3.3.1.4	Integer32	read-only	Average of current power supply temperature readings
I32 fusionPsuPowerIn	1.3.6.1.4.1.43296.3.3.1.5	Integer32	read-only	Current power supply input power
I32 fusionPsuPowerOut	1.3.6.1.4.1.43296.3.3.1.6	Integer32	read-only	Current power supply output power
fusionPortTable	1.3.6.1.4.1.43296.3.4		not-accessible	Table of ports
fusionPort	1.3.6.1.4.1.43296.3.4.1		not-accessible	Port information
I32 fusionPortLineCard	1.3.6.1.4.1.43296.3.4.1.1	Integer32	read-only	Line card index
I32 fusionPortIndex	1.3.6.1.4.1.43296.3.4.1.2	Integer32	read-only	Port index
STR fusionPortName	1.3.6.1.4.1.43296.3.4.1.3	SnmpAdminString	read-only	Port name
T/F fusionPortPresent	1.3.6.1.4.1.43296.3.4.1.4	TruthValue	read-only	True if a SFP is present in the port
T/F fusionPortHasSignal	1.3.6.1.4.1.43296.3.4.1.5	TruthValue	read-only	True if signal has been detected on the port
T/F fusionPortEnabled	1.3.6.1.4.1.43296.3.4.1.6	TruthValue	read-only	True if the port is currently enabled
STR fusionPortAlias	1.3.6.1.4.1.43296.3.4.1.7	SnmpAdminString	read-write	Port alias
I32 fusionPortSpeed	1.3.6.1.4.1.43296.3.4.1.8	Integer32	read-write	Currently configured port speed
fusionTrapValues	1.3.6.1.4.1.43296.3.5
T/F fusionLidOpenStatus	1.3.6.1.4.1.43296.3.5.1	TruthValue	read-only	True if the lid is currently open
T/F fusionFanFaultStatus	1.3.6.1.4.1.43296.3.5.2	TruthValue	read-only	True if there is a fan fault
T/F fusionHighTempStatus	1.3.6.1.4.1.43296.3.5.3	TruthValue	read-only	True if there is a fan fault
INT fusionPortUsageStatus	1.3.6.1.4.1.43296.3.5.4	INTEGER	read-only	Port usage status, corresponds to right hand LED for port
INT fusionPortLinkStatus	1.3.6.1.4.1.43296.3.5.5	INTEGER	read-only	Port link status, corresponds to left hand LED for port
T/F fusionPsuFaultStatus	1.3.6.1.4.1.43296.3.5.6	TruthValue	read-only	True if there is a PSU fault
fusionTraps	1.3.6.1.4.1.43296.3.6
NTF fusionPowerFail	1.3.6.1.4.1.43296.3.6.1			System is shutting down because of power loss
NTF fusionTamperAlert	1.3.6.1.4.1.43296.3.6.2			The lid of the device has been opened or closed
NTF fusionTempAlert	1.3.6.1.4.1.43296.3.6.3			Temperature has gone above or below a threshold
NTF fusionPsuAlert	1.3.6.1.4.1.43296.3.6.4			Power supply has been added or removed, become faulty or returned to normal
NTF fusionSystemAlert	1.3.6.1.4.1.43296.3.6.5			The system service has restarted
NTF fusionFanAlert	1.3.6.1.4.1.43296.3.6.6			A fan has become faulty or returned to normal
NTF fusionPortAlert	1.3.6.1.4.1.43296.3.6.7			Port link status or usage has changed, corresponds to changes in LEDs
NTF fusionConfigUpdateAlert	1.3.6.1.4.1.43296.3.6.8			The device's configuration has been changed

RFC description

Manages Exablaze Exalink-FUSION network adapter with serial number, firmware version, hardware type, and line card information.

Start monitoring Exablaze ExaLink Fusion chassis switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EXALINK-FUSION-MIB