All MIBs › EVAPA-MIB › hpevapaSeverity
hpevapaSeverity
Module: EVAPA-MIB
OID (symbolic): EVAPA-MIB::hpevapaSeverity
OID (numeric): 1.3.6.1.4.1.232.175.1.1.6
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: Severity of the Alarm
What is hpevapaSeverity?
This read-only DisplayString reports the severity level of the reported EVA Performance Advisor alarm. An admin uses this to triage incoming alarms, prioritizing critical or major severities over informational ones. A value of "Critical" on an alarm would prompt the admin to investigate the affected array immediately rather than deferring it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.175.1.1.6 snmpwalk -v2c -c public <target> EVAPA-MIB::hpevapaSeverity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.175.1.1.6.1 snmpget -v2c -c public <target> EVAPA-MIB::hpevapaSeverity.1
Start monitoring HP StorageWorks Enterprise Virtual Array (EVA) SAN storage system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EVAPA-MIB::hpevapaSeverity OID value, configure state conditions and alerts, and monitor any HP StorageWorks Enterprise Virtual Array (EVA) SAN storage system from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.175 | hpevapa | EVAPA-MIB |
| 1.3.6.1.4.1.232.175.1 | hpevent | EVAPA-MIB |
| 1.3.6.1.4.1.232.175.1.1 | hpevapaTraps | EVAPA-MIB |
| 1.3.6.1.4.1.232.175.1.1.6 | hpevapaSeverity | EVAPA-MIB |