All MIBs › ES1200-MIB › swL2PortCtrlPriority
swL2PortCtrlPriority
Module: ES1200-MIB
OID (symbolic): ES1200-MIB::swL2PortCtrlPriority
OID (numeric): 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The priority queueing for packets received on this port, except for BPDU/IGMP packets and packets with unknown unicast destination address. IGMP and BPDU packets are always routed with high priority; packets with unknown unicast destination addresses are always routed with low priority. Other packets follow the rules below: other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values.
default(2) - A packet is normally classified as low priority ,unless at least one of the following is true: (a)The packet contained a TAG (per 802.1Q definition) with the priority greater or equal to 4. (b)The address-table entry for the destination address had Pd=HIGH. force-low_priority(3) - A packet is normally classified as low priority. force-high_priority(4) - A packet is normally classified as high priority.
What is swL2PortCtrlPriority?
A read-write enumeration setting this port's default priority-queue classification for received packets; note that IGMP/BPDU frames are always treated as high priority and frames with an unknown unicast destination are always treated as low priority regardless of this setting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.10 snmpwalk -v2c -c public <target> ES1200-MIB::swL2PortCtrlPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.10.1 snmpget -v2c -c public <target> ES1200-MIB::swL2PortCtrlPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.10.1 i <value>
Start monitoring FORE Systems/Marconi ES1200 series fast Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ES1200-MIB::swL2PortCtrlPriority OID value, configure state conditions and alerts, and monitor any FORE Systems/Marconi ES1200 series fast Ethernet switch from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.326 | fore | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2 | systems | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20 | ethernet | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20.1 | edge | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20.1.2 | golf | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2 | golfcommon | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2 | fore_mgmt | COMMON-GOLF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.326.2.20.1.2.2.2.25 | es1200Mgmt | ES1200-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2 | swL2Mgmt | ES1200-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4 | swL2PortMgmt | ES1200-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2 | swL2PortCtrlTable | ES1200-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1 | swL2PortCtrlEntry | ES1200-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.10 | swL2PortCtrlPriority | ES1200-MIB |