ERICSSON-ROUTER-QOS-MIB :: eriRouterQosIfQueueHCIPv4TailDroppedPkts

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ERICSSON-ROUTER-QOS-MIB › eriRouterQosIfQueueHCIPv4TailDroppedPkts

eriRouterQosIfQueueHCIPv4TailDroppedPkts

Module: ERICSSON-ROUTER-QOS-MIB

OID (symbolic): ERICSSON-ROUTER-QOS-MIB::eriRouterQosIfQueueHCIPv4TailDroppedPkts

OID (numeric): 1.3.6.1.4.1.193.218.2.22.1.2.1.25

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The number of IPv4 packets dropped when the total number of packets in this queue was greater than the maximum threshold. This object is a 64-bit version of eriRouterQosIfQueueIPv4TailDroppedPkts.

Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

What is eriRouterQosIfQueueHCIPv4TailDroppedPkts?

This counter reports the IPv4 packets dropped from this queue because its total packet count exceeded the configured maximum threshold, i.e. a straightforward tail drop once the queue was full. It applies to a transmit queue on an interface where QoS queuing is enabled. It is the 64-bit version of eriRouterQosIfQueueIPv4TailDroppedPkts, used on high-traffic interface queues where a 32-bit counter could wrap between polls. Discontinuities in the value can occur when the management system re-initializes, so a sudden reset does not necessarily mean the underlying activity stopped.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.218.2.22.1.2.1.25
snmpwalk -v2c -c public <target> ERICSSON-ROUTER-QOS-MIB::eriRouterQosIfQueueHCIPv4TailDroppedPkts

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.193.218.2.22.1.2.1.25.1
snmpget -v2c -c public <target> ERICSSON-ROUTER-QOS-MIB::eriRouterQosIfQueueHCIPv4TailDroppedPkts.1

Start monitoring Ericsson router, broadband/subscriber-aggregation (QoS-enabled circuit statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERICSSON-ROUTER-QOS-MIB::eriRouterQosIfQueueHCIPv4TailDroppedPkts OID value, configure state conditions and alerts, and monitor any Ericsson router, broadband/subscriber-aggregation (QoS-enabled circuit statistics) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.193ericssonANS-COMMON-MIB
1.3.6.1.4.1.193.218eriRouterSMIERICSSON-ROUTER-SMI
1.3.6.1.4.1.193.218.2eriRouterMgmtERICSSON-ROUTER-SMI
Numeric OIDNameModule
1.3.6.1.4.1.193.218.2.22eriRouterQosMibERICSSON-ROUTER-QOS-MIB
1.3.6.1.4.1.193.218.2.22.1eriRouterQosMibObjectsERICSSON-ROUTER-QOS-MIB
1.3.6.1.4.1.193.218.2.22.1.2eriRouterQosInterfaceQueueStatsTableERICSSON-ROUTER-QOS-MIB
1.3.6.1.4.1.193.218.2.22.1.2.1eriRouterQosInterfaceQueueStatsEntryERICSSON-ROUTER-QOS-MIB
1.3.6.1.4.1.193.218.2.22.1.2.1.25eriRouterQosIfQueueHCIPv4TailDroppedPktsERICSSON-ROUTER-QOS-MIB