ERICSSON-ROUTER-DHCP-MIB :: eriRouterDhcpIntfThresholdFallingThreshold

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ERICSSON-ROUTER-DHCP-MIB › eriRouterDhcpIntfThresholdFallingThreshold

eriRouterDhcpIntfThresholdFallingThreshold

Module: ERICSSON-ROUTER-DHCP-MIB

OID (symbolic): ERICSSON-ROUTER-DHCP-MIB::eriRouterDhcpIntfThresholdFallingThreshold

OID (numeric): 1.3.6.1.4.1.193.218.2.30.1.1.1.6

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The falling threshold is a value which specifies that any enabled falling threshold events are to be generated when the value of the currently available leases drops to the falling threshold value via an allocation of a lease from the pool.

The number of available leases is reported in eriRouterDhcpIntfThresholdAvailable. A falling threshold event is either a notification or a log message or both. Falling threshold events are enabled if either or both of eriRouterDhcpIntfThresholdFallingSendTrap and eriRouterDhcpIntfThresholdFallingLogMessage are true.

Note, this is a falling threshold, so a falling threshold event will only be triggered on a transition of the value of eriRouterDhcpIntfThresholdAvailable dropping from (eriRouterDhcpIntfThresholdFallingThreshold+1) to eriRouterDhcpIntfThresholdFallingThreshold.

What is eriRouterDhcpIntfThresholdFallingThreshold?

Sets the available-leases level (0-196608) at which a falling-threshold event fires for this interface's pool; configuring it to 10, for example, warns the admin via trap or log once only 10 free leases remain before the pool runs out.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.218.2.30.1.1.1.6
snmpwalk -v2c -c public <target> ERICSSON-ROUTER-DHCP-MIB::eriRouterDhcpIntfThresholdFallingThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.193.218.2.30.1.1.1.6.1
snmpget -v2c -c public <target> ERICSSON-ROUTER-DHCP-MIB::eriRouterDhcpIntfThresholdFallingThreshold.1

Start monitoring Ericsson SmartEdge/SM/SSR router (Redback Networks heritage) (DHCP address-pool utilization) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERICSSON-ROUTER-DHCP-MIB::eriRouterDhcpIntfThresholdFallingThreshold OID value, configure state conditions and alerts, and monitor any Ericsson SmartEdge/SM/SSR router (Redback Networks heritage) (DHCP address-pool utilization) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.193ericssonANS-COMMON-MIB
1.3.6.1.4.1.193.218eriRouterSMIERICSSON-ROUTER-SMI
1.3.6.1.4.1.193.218.2eriRouterMgmtERICSSON-ROUTER-SMI
Numeric OIDNameModule
1.3.6.1.4.1.193.218.2.30eriRouterDhcpMibERICSSON-ROUTER-DHCP-MIB
1.3.6.1.4.1.193.218.2.30.1eriRouterDhcpMIBObjectsERICSSON-ROUTER-DHCP-MIB
1.3.6.1.4.1.193.218.2.30.1.1eriRouterDhcpIntfThresholdTableERICSSON-ROUTER-DHCP-MIB
1.3.6.1.4.1.193.218.2.30.1.1.1eriRouterDhcpIntfThresholdEntryERICSSON-ROUTER-DHCP-MIB
1.3.6.1.4.1.193.218.2.30.1.1.1.6eriRouterDhcpIntfThresholdFallingThresholdERICSSON-ROUTER-DHCP-MIB