All MIBs › ERI-DNX-STM1-OC3-MIB › optTransportCmdStatus
optTransportCmdStatus
Module: ERI-DNX-STM1-OC3-MIB
OID (symbolic): ERI-DNX-STM1-OC3-MIB::optTransportCmdStatus
OID (numeric): 1.3.6.1.4.1.644.2.4.2.7.2.3.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This is the command status for the Framer Row. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure.
Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row
Transport Action Commands used in SET Command (1..99) updateTest (1) Can be used optionally when activating loops and berts in order to get status code back in response clearErrors (14) Resets all error counters and bert test time to zero
Response States used in GET RESPONSE Command (100..199) update-successful (101) Test action has been successfully performed clear-successful (114) Error counts have been successfully cleared
The Error Codes used in GET RESPONSE Command (400..799) err-general-test-error (400) Unknown Test request error occurred. err-invalid-loop-type (402) Unrecognized loop selection err-field-cannot-be-set (406) Read-only field was included in SET request err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too big
What is optTransportCmdStatus?
Command/response status register for this Transport interface: a SET writes an action like updateTest(1) or clearErrors(14), and the subsequent GET returns success or a numbered error code explaining a rejected request.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.7.2.3.1.12 snmpwalk -v2c -c public <target> ERI-DNX-STM1-OC3-MIB::optTransportCmdStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.7.2.3.1.12.1 snmpget -v2c -c public <target> ERI-DNX-STM1-OC3-MIB::optTransportCmdStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.644.2.4.2.7.2.3.1.12.1 i <value>
Start monitoring Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (STM-1/OC-3 optical interface card) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-STM1-OC3-MIB::optTransportCmdStatus OID value, configure state conditions and alerts, and monitor any Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (STM-1/OC-3 optical interface card) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.644 | eriEnterpriseRoot | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2 | eriProducts | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2.4 | dnx | ERI-DNX-SMC-MIB |
| 1.3.6.1.4.1.644.2.4.2 | devices | ERI-DNX-SMC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.7 | dnxStm1Oc3 | ERI-DNX-STM1-OC3-MIB |
| 1.3.6.1.4.1.644.2.4.2.7.2 | opticalDiag | ERI-DNX-STM1-OC3-MIB |
| 1.3.6.1.4.1.644.2.4.2.7.2.3 | opticalTransportStatusTable | ERI-DNX-STM1-OC3-MIB |
| 1.3.6.1.4.1.644.2.4.2.7.2.3.1 | opticalTransportStatusEntry | ERI-DNX-STM1-OC3-MIB |
| 1.3.6.1.4.1.644.2.4.2.7.2.3.1.12 | optTransportCmdStatus | ERI-DNX-STM1-OC3-MIB |