ERI-DNX-OCTAL-T1E1-MIB :: oT1E1InterNational

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ERI-DNX-OCTAL-T1E1-MIB › oT1E1InterNational

oT1E1InterNational

Module: ERI-DNX-OCTAL-T1E1-MIB

OID (symbolic): ERI-DNX-OCTAL-T1E1-MIB::oT1E1InterNational

OID (numeric): 1.3.6.1.4.1.644.2.4.2.4.1.1.1.16

Node type: OBJECT-TYPE

Type: OneByteField

Access: read-write

Description: Enables InterNational S(i) Spare bit to be set to zero or one.
This single byte field can be changed to set the values 
of the Bit 1 of TS0 G.704 frame as depicted below:

         reserved bits        S(i)
   -------------------------- -----
   0   0   0   0   0   0   0   1      = 01 (default)
   
Values should be entered in Hex.  If reserved bits are changed,
an error code (427) will be returned in the command status.

What is oT1E1InterNational?

This single-byte field sets the International S(i) spare bit of Bit 1 in the TS0 G.704 frame, entered in hex, defaulting to 0x01. Admins adjust it only for specific E1 international-signaling requirements dictated by the carrier or interconnect standard in use. Leaving oT1E1InterNational at its default 0x01 keeps the international spare bit at its standard setting.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.4.1.1.1.16
snmpwalk -v2c -c public <target> ERI-DNX-OCTAL-T1E1-MIB::oT1E1InterNational

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.4.1.1.1.16.1
snmpget -v2c -c public <target> ERI-DNX-OCTAL-T1E1-MIB::oT1E1InterNational.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.644.2.4.2.4.1.1.1.16.1 s <value>

Start monitoring Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (octal T1/E1 port module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-OCTAL-T1E1-MIB::oT1E1InterNational OID value, configure state conditions and alerts, and monitor any Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (octal T1/E1 port module) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.644eriEnterpriseRootERI-ROOT-SMI
1.3.6.1.4.1.644.2eriProductsERI-ROOT-SMI
1.3.6.1.4.1.644.2.4dnxERI-DNX-SMC-MIB
1.3.6.1.4.1.644.2.4.2devicesERI-DNX-SMC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.644.2.4.2.4dnxOT1E1ERI-DNX-OCTAL-T1E1-MIB
1.3.6.1.4.1.644.2.4.2.4.1oteConfigERI-DNX-OCTAL-T1E1-MIB
1.3.6.1.4.1.644.2.4.2.4.1.1oT1E1ConfigTableERI-DNX-OCTAL-T1E1-MIB
1.3.6.1.4.1.644.2.4.2.4.1.1.1oT1E1ConfigEntryERI-DNX-OCTAL-T1E1-MIB
1.3.6.1.4.1.644.2.4.2.4.1.1.1.16oT1E1InterNationalERI-DNX-OCTAL-T1E1-MIB