ERI-DNX-OCTAL-T1E1-MIB :: oT1E1CfgLinkAddr

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ERI-DNX-OCTAL-T1E1-MIB › oT1E1CfgLinkAddr

oT1E1CfgLinkAddr

Module: ERI-DNX-OCTAL-T1E1-MIB

OID (symbolic): ERI-DNX-OCTAL-T1E1-MIB::oT1E1CfgLinkAddr

OID (numeric): 1.3.6.1.4.1.644.2.4.2.4.1.1.1.1

Node type: OBJECT-TYPE

Type: LinkPortAddress

Access: read-only

Description: This number uniquely identifies an Octal T1/E1 link resource. This number will be used throughout the system to identify a unique link. The format is represented using an IP address syntax (4 byte string). Note that the maximum valid port number will vary depending on the specified carrier and framing options. For example, an octal T1/E1 device has 8 ports but the DS3 has 28 ports.

The 1st byte is reserved for future Nest Number use The 2nd byte represents the Slot Number (1-11) The 3rd byte represents the Port Number (1-32) The 4th byte is reserved for future use

What is oT1E1CfgLinkAddr?

This is a unique identifier for an Octal T1/E1 link, encoded like an IP address where the 2nd byte is the slot number and the 3rd byte is the port number. Admins use it to pinpoint exactly which physical T1/E1 port on which card slot a given configuration row applies to. A value like 0.3.5.0 identifies the link in slot 3, port 5 of the nest.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.4.1.1.1.1
snmpwalk -v2c -c public <target> ERI-DNX-OCTAL-T1E1-MIB::oT1E1CfgLinkAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.4.1.1.1.1.1
snmpget -v2c -c public <target> ERI-DNX-OCTAL-T1E1-MIB::oT1E1CfgLinkAddr.1

Start monitoring Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (octal T1/E1 port module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-OCTAL-T1E1-MIB::oT1E1CfgLinkAddr OID value, configure state conditions and alerts, and monitor any Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (octal T1/E1 port module) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.644eriEnterpriseRootERI-ROOT-SMI
1.3.6.1.4.1.644.2eriProductsERI-ROOT-SMI
1.3.6.1.4.1.644.2.4dnxERI-DNX-SMC-MIB
1.3.6.1.4.1.644.2.4.2devicesERI-DNX-SMC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.644.2.4.2.4dnxOT1E1ERI-DNX-OCTAL-T1E1-MIB
1.3.6.1.4.1.644.2.4.2.4.1oteConfigERI-DNX-OCTAL-T1E1-MIB
1.3.6.1.4.1.644.2.4.2.4.1.1oT1E1ConfigTableERI-DNX-OCTAL-T1E1-MIB
1.3.6.1.4.1.644.2.4.2.4.1.1.1oT1E1ConfigEntryERI-DNX-OCTAL-T1E1-MIB
1.3.6.1.4.1.644.2.4.2.4.1.1.1.1oT1E1CfgLinkAddrERI-DNX-OCTAL-T1E1-MIB