All MIBs › ERI-DNX-OCTAL-T1E1-MIB › oT1E1CfgLBO
oT1E1CfgLBO
Module: ERI-DNX-OCTAL-T1E1-MIB
OID (symbolic): ERI-DNX-OCTAL-T1E1-MIB::oT1E1CfgLBO
OID (numeric): 1.3.6.1.4.1.644.2.4.2.4.1.1.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines the type of Line Build Out (LBO) used on the link. Choose between short haul or long haul designations but this varies between T1 & E1. E1 LBO is defined by authentication of signal presented to receiving circuitry while T1 LBO can be defined by cable length or signal.
e1-shortHaul-0-6db (1) 0 to -6 decibel loss e1-longHaul-0-34db (2) 0 to -34 decibel loss
t1-longHaul-0-0db (3) 0.0 decibel loss t1-longHaul-7-5db (4) 0.0 to -7.5 decibel loss t1-longHaul-15-0db (5) 0.0 to -15.0 decibel loss t1-longHaul-22-5db (6) 0.0 to -22.5 decibel loss
t1-shortHaul-0-133ft (7) 0 to 133 feet of cable t1-shortHaul-133-266ft (8) 133 to 266 feet of cable t1-shortHaul-266-399ft (9) 266 to 399 feet of cable t1-shortHaul-399-533ft (10) 399 to 533 feet of cable t1-shortHaul-533-655ft (11) 533 to 655 feet of cable
What is oT1E1CfgLBO?
This selects the Line Build Out setting that controls the transmit signal level or equivalent cable-length compensation on this T1/E1 link, expressed in decibel loss for long-haul options and in cable-length ranges for T1 short-haul options. Admins set this to match the actual physical cable run length or required signal attenuation between the device and the network demarcation point. Setting oT1E1CfgLBO to t1-shortHaul-266-399ft(9) matches the link to a T1 short-haul cable run of 266 to 399 feet.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.4.1.1.1.12 snmpwalk -v2c -c public <target> ERI-DNX-OCTAL-T1E1-MIB::oT1E1CfgLBO
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.4.1.1.1.12.1 snmpget -v2c -c public <target> ERI-DNX-OCTAL-T1E1-MIB::oT1E1CfgLBO.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.644.2.4.2.4.1.1.1.12.1 i <value>
Start monitoring Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (octal T1/E1 port module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-OCTAL-T1E1-MIB::oT1E1CfgLBO OID value, configure state conditions and alerts, and monitor any Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (octal T1/E1 port module) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.644 | eriEnterpriseRoot | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2 | eriProducts | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2.4 | dnx | ERI-DNX-SMC-MIB |
| 1.3.6.1.4.1.644.2.4.2 | devices | ERI-DNX-SMC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.4 | dnxOT1E1 | ERI-DNX-OCTAL-T1E1-MIB |
| 1.3.6.1.4.1.644.2.4.2.4.1 | oteConfig | ERI-DNX-OCTAL-T1E1-MIB |
| 1.3.6.1.4.1.644.2.4.2.4.1.1 | oT1E1ConfigTable | ERI-DNX-OCTAL-T1E1-MIB |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1 | oT1E1ConfigEntry | ERI-DNX-OCTAL-T1E1-MIB |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.12 | oT1E1CfgLBO | ERI-DNX-OCTAL-T1E1-MIB |