All MIBs › ERI-DNX-OCTAL-T1E1-MIB › oT1E1CfgCmdStatus
oT1E1CfgCmdStatus
Module: ERI-DNX-OCTAL-T1E1-MIB
OID (symbolic): ERI-DNX-OCTAL-T1E1-MIB::oT1E1CfgCmdStatus
OID (numeric): 1.3.6.1.4.1.644.2.4.2.4.1.1.1.13
Node type: OBJECT-TYPE
Type: LinkCmdStatus
Access: read-write
Description: The command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure.
Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row
T1/E1 Link Commands used in SET Command (1..99) update-link-config(1) Change existing Link Configuration inServiceAll (7) Change Link Status to in-service for all 8 links. copyToAll (9) Copy T1 Link configuration to all other links within the same device outOfServiceAll (12) Change Link Status to out-of-service for all 8 links.
Response States used in GET RESPONSE Command (100..199) update-successful (101) Link data has been successfully changed insvc-successful (107) All Links have been successfully placed In Service copy-successful (109) T1 Link data has been successfully copied to other links oos-successful (112) All Links have been successfully placed Out of Service
T1/E1 Link Config Error Codes used in GET RESPONSE Command (200..699) err-general-link-config-error (400) Unknown link configuration error occurred err-invalid-link-status (401) Unrecognized link status setting err-invalid-link-framing (402) Line framing type not valid for link type err-invalid-link-command (403) Unrecognized link command-action err-invalid-link-lbo (404) Line Build Out option not valid for link type err-invalid-esf-format (405) ESF type not applicable to link type err-invalid-network-loop (410) Unrecognized network loop setting err-invalid-yellow-alrm (411) Unrecognized yellow alarm setting err-invalid-red-timeout (412) Unrecognized red alarm timeout err-invalid-idle-code (413) Unrecognized idle code err-device-in-standby (414) Can't change config for designated Standby device err-invalid-link-bits (427) Reserved E1 National bits must be left at zero. err-data-locked-by-another-user (450) Another administrative user is making changes to this part of the system via a terminal session. Check Event Log for user name err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too big
What is oT1E1CfgCmdStatus?
This is the command and status field that must be included as the last variable in any SET PDU against this row; setting it to update-link-config(1) commits pending changes to the other writable fields in this same row, while GET responses return codes indicating success, like update-successful, or specific configuration errors, like err-invalid-link-lbo. Admins rely on this field both to apply a batch of link-configuration changes atomically and to diagnose exactly why a SET was rejected. Setting oT1E1CfgCmdStatus to inServiceAll(7) is a shortcut that places all 8 links on the card in service at once.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.4.1.1.1.13 snmpwalk -v2c -c public <target> ERI-DNX-OCTAL-T1E1-MIB::oT1E1CfgCmdStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.4.1.1.1.13.1 snmpget -v2c -c public <target> ERI-DNX-OCTAL-T1E1-MIB::oT1E1CfgCmdStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.644.2.4.2.4.1.1.1.13.1 s <value>
Start monitoring Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (octal T1/E1 port module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-OCTAL-T1E1-MIB::oT1E1CfgCmdStatus OID value, configure state conditions and alerts, and monitor any Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (octal T1/E1 port module) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.644 | eriEnterpriseRoot | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2 | eriProducts | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2.4 | dnx | ERI-DNX-SMC-MIB |
| 1.3.6.1.4.1.644.2.4.2 | devices | ERI-DNX-SMC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.4 | dnxOT1E1 | ERI-DNX-OCTAL-T1E1-MIB |
| 1.3.6.1.4.1.644.2.4.2.4.1 | oteConfig | ERI-DNX-OCTAL-T1E1-MIB |
| 1.3.6.1.4.1.644.2.4.2.4.1.1 | oT1E1ConfigTable | ERI-DNX-OCTAL-T1E1-MIB |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1 | oT1E1ConfigEntry | ERI-DNX-OCTAL-T1E1-MIB |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.13 | oT1E1CfgCmdStatus | ERI-DNX-OCTAL-T1E1-MIB |