All MIBs › ERI-DNX-NEST-SYS-MIB › xSlotCmdStatus
xSlotCmdStatus
Module: ERI-DNX-NEST-SYS-MIB
OID (symbolic): ERI-DNX-NEST-SYS-MIB::xSlotCmdStatus
OID (numeric): 1.3.6.1.4.1.644.2.4.1.11.2.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The command status for this slot configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure.
Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row
Slot Device Commands used in SET Command (1..99) update-slot-config (1) change an aspect of current slot configuration delete-slot-config (2) remove existing Slot Configuration. Deleting the Slot Configuration using the Slot Command Status will result in the removal of all configured connections associated with that slot number. ndr-switchover (10) force a switchover to the Standby device ndr-restore (11) force a restore back to the original device
Response States used in GET RESPONSE Command (100..199) update-successful (101) slot data has been successfully changed delete-successful (102) slot data has been successfully removed switch-successful (110) Slot N+1 Redundancy device has been successfully switched over to Standby device restore-successful (111) Slot N+1 Redundancy device has been successfully restored back to Primary device
Slot Config Error Codes used in GET RESPONSE Command (200..799) err-general-slot-config-error (200) Unknown slot configuration error occurred. err-invalid-slot-type (201) Configured slot type not in valid range err-invalid-slot-command (202) Unrecognized slot command-action err-invalid-slot-name (203) Configured slot name too long err-redundancy-disabled (204) Redundancy disabled on this system or does not apply to device type err-cannot-chg-sys-device (205) System Device type does not support configuration change err-invalid-redundancy-state (207) Redundancy state does not apply or invalid err-cannot-delete-online-device (208) Device cannot be present when deleting configuration err-data-locked-by-another-user (450) Another administrative user is making changes to this part of the system via a terminal session. Check Event Log for user name err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too big
What is xSlotCmdStatus?
A command/response object used to change this expansion-nest slot's configuration: an admin sets it to values like update-slot-config(1) or delete-slot-config(2) to apply or remove a slot's setup, and the agent overwrites it with a response code (e.g. update-successful(101) or an error like err-invalid-slot-type(201)) indicating what happened. This field must be included in the same SET request as any other slot changes for them to take effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.1.11.2.1.10 snmpwalk -v2c -c public <target> ERI-DNX-NEST-SYS-MIB::xSlotCmdStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.1.11.2.1.10.1 snmpget -v2c -c public <target> ERI-DNX-NEST-SYS-MIB::xSlotCmdStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.644.2.4.1.11.2.1.10.1 i <value>
Start monitoring Eastern Research Inc. DNX-88/DNX-11 nest multiplexer chassis (slot/redundancy administration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-NEST-SYS-MIB::xSlotCmdStatus OID value, configure state conditions and alerts, and monitor any Eastern Research Inc. DNX-88/DNX-11 nest multiplexer chassis (slot/redundancy administration) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.644 | eriEnterpriseRoot | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2 | eriProducts | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2.4 | dnx | ERI-DNX-SMC-MIB |
| 1.3.6.1.4.1.644.2.4.1 | sysMgr | ERI-DNX-SMC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.644.2.4.1.11 | eXpansionNestAdmin | ERI-DNX-NEST-SYS-MIB |
| 1.3.6.1.4.1.644.2.4.1.11.2 | xSlotTable | ERI-DNX-NEST-SYS-MIB |
| 1.3.6.1.4.1.644.2.4.1.11.2.1 | xSlotEntry | ERI-DNX-NEST-SYS-MIB |
| 1.3.6.1.4.1.644.2.4.1.11.2.1.10 | xSlotCmdStatus | ERI-DNX-NEST-SYS-MIB |