All MIBs › ERI-DNX-NEST-SYS-MIB › xNdrCmdStatus
xNdrCmdStatus
Module: ERI-DNX-NEST-SYS-MIB
OID (symbolic): ERI-DNX-NEST-SYS-MIB::xNdrCmdStatus
OID (numeric): 1.3.6.1.4.1.644.2.4.1.11.3.1.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The command status for this ndr configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure.
Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row
NDR Device Commands used in SET Command (1..99) update-ndr (1) change an aspect of current nest N+1 Redundancy
Response States used in GET RESPONSE Command (100..199) update-successful (101) ndr data has been successfully changed
NDR Config Error Codes used in GET RESPONSE Command (200..799) err-general-ndr-config-error (200) Unknown ndr configuration error occurred. err-invalid-ndr-group-type (201) Configured NDR Group type not in valid range err-invalid-ndr-command (202) Unrecognized NDR command-action err-invalid-ndr-autoswitch (203) NDR Auto Switchover value not in valid range err-invalid-ndr-chassis (204) NDR Chassis Type value not in valid range err-invalid-ndr-dual-bb (205) NDR Dual Broadband Group value not in valid err-invalid-ndr-dual-psx (206) NDR Dual PSX Power Supply value not in valid err-data-locked-by-another-user (450) Another administrative user is making changes to this part of the system via a terminal session. Check Event Log for user name err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too big
What is xNdrCmdStatus?
A command/response object used to change this expansion nest's N+1 redundancy configuration: an admin sets it to update-ndr(1) to apply a change, and the agent overwrites it with a response code such as update-successful(101) or an error like err-invalid-ndr-chassis(204). This field must be included in the same SET request as any other NDR changes for them to take effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.1.11.3.1.16 snmpwalk -v2c -c public <target> ERI-DNX-NEST-SYS-MIB::xNdrCmdStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.1.11.3.1.16.1 snmpget -v2c -c public <target> ERI-DNX-NEST-SYS-MIB::xNdrCmdStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.644.2.4.1.11.3.1.16.1 i <value>
Start monitoring Eastern Research Inc. DNX-88/DNX-11 nest multiplexer chassis (slot/redundancy administration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-NEST-SYS-MIB::xNdrCmdStatus OID value, configure state conditions and alerts, and monitor any Eastern Research Inc. DNX-88/DNX-11 nest multiplexer chassis (slot/redundancy administration) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.644 | eriEnterpriseRoot | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2 | eriProducts | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2.4 | dnx | ERI-DNX-SMC-MIB |
| 1.3.6.1.4.1.644.2.4.1 | sysMgr | ERI-DNX-SMC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.644.2.4.1.11 | eXpansionNestAdmin | ERI-DNX-NEST-SYS-MIB |
| 1.3.6.1.4.1.644.2.4.1.11.3 | xNdrTable | ERI-DNX-NEST-SYS-MIB |
| 1.3.6.1.4.1.644.2.4.1.11.3.1 | xNdrEntry | ERI-DNX-NEST-SYS-MIB |
| 1.3.6.1.4.1.644.2.4.1.11.3.1.16 | xNdrCmdStatus | ERI-DNX-NEST-SYS-MIB |