All MIBs › ERI-DNX-NEST-SYS-MIB › dbSyncCmdStatus
dbSyncCmdStatus
Module: ERI-DNX-NEST-SYS-MIB
OID (symbolic): ERI-DNX-NEST-SYS-MIB::dbSyncCmdStatus
OID (numeric): 1.3.6.1.4.1.644.2.4.1.12.1.2.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The command status for this DB Synchronization. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure.
Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row
DB Sync Commands used in SET Command (1..99) update (1) Change the auto sync mode startDBSync (2) Starts the DB synchronization process
Response States used in GET RESPONSE Command (100..199) update-successful (101) Auto Sync data has been successfully changed sync-start-successful (102) DB Sync process has been successfully started sync-completed-successful (120) DB Sync process has been successfully finished
DB Sync Error Codes used in GET RESPONSE Command (200..799) err-gen-dbsync-cfg-error (200) Unknown DB Sync configuration error occurred. err-standby-not-present (201) DB Synchronization cannot be started without standby systemManager Device. err-dbsync-failed (202) DB Synchronization process has failed err-invalid-dbsync-command (203, Unrecognized DB Sync command action err-invalid-dbsync-mode (204) Unrecognized auto sync setting err-data-locked-by-another-user (450) Another administrative user is making changes to this part of the system via a terminal session. Check Event Log for user name err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too big
What is dbSyncCmdStatus?
A command/response object used to control database synchronization: an admin sets it to update(1) to change the auto-sync mode or startDBSync(2) to kick off a manual sync, and the agent overwrites it with a response code such as sync-completed-successful(120) or an error like err-standby-not-present(201) if there's no standby System Manager to sync with.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.1.12.1.2.4 snmpwalk -v2c -c public <target> ERI-DNX-NEST-SYS-MIB::dbSyncCmdStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.1.12.1.2.4.1 snmpget -v2c -c public <target> ERI-DNX-NEST-SYS-MIB::dbSyncCmdStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.644.2.4.1.12.1.2.4.1 i <value>
Start monitoring Eastern Research Inc. DNX-88/DNX-11 nest multiplexer chassis (slot/redundancy administration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-NEST-SYS-MIB::dbSyncCmdStatus OID value, configure state conditions and alerts, and monitor any Eastern Research Inc. DNX-88/DNX-11 nest multiplexer chassis (slot/redundancy administration) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.644 | eriEnterpriseRoot | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2 | eriProducts | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2.4 | dnx | ERI-DNX-SMC-MIB |
| 1.3.6.1.4.1.644.2.4.1 | sysMgr | ERI-DNX-SMC-MIB |
| 1.3.6.1.4.1.644.2.4.1.12 | utilities | ERI-DNX-SMC-MIB |
| 1.3.6.1.4.1.644.2.4.1.12.1 | database | ERI-DNX-SMC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.644.2.4.1.12.1.2 | dbSyncronize | ERI-DNX-NEST-SYS-MIB |
| 1.3.6.1.4.1.644.2.4.1.12.1.2.4 | dbSyncCmdStatus | ERI-DNX-NEST-SYS-MIB |