All MIBs › ERI-DNX-HDS3-MIB › hds3M13RemLoop
hds3M13RemLoop
Module: ERI-DNX-HDS3-MIB
OID (symbolic): ERI-DNX-HDS3-MIB::hds3M13RemLoop
OID (numeric): 1.3.6.1.4.1.644.2.4.2.2.1.1.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Controls line codes used to set and reset DS3 remote line loopback requests. This setting is provided by the carrier. These codes cause a DS3 loopback in remote DS3 equipment or respond to codes from remote DS3 equipment. This applies to Bellcore M13 mode only. Different manufacturers use different patterns in M13 mode.
What is hds3M13RemLoop?
This read-write setting selects which C-bit inversion pattern (first, second, or third C-bit inverted) is used to send and detect remote DS3 loopback requests when the port is in Bellcore M13 mode. The carrier specifies which pattern to use, since different DS3 equipment vendors implement different M13 loop-code conventions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.2.1.1.1.14 snmpwalk -v2c -c public <target> ERI-DNX-HDS3-MIB::hds3M13RemLoop
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.2.1.1.1.14.1 snmpget -v2c -c public <target> ERI-DNX-HDS3-MIB::hds3M13RemLoop.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.644.2.4.2.2.1.1.1.14.1 i <value>
Start monitoring Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (Hybrid DS3 card) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-HDS3-MIB::hds3M13RemLoop OID value, configure state conditions and alerts, and monitor any Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (Hybrid DS3 card) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.644 | eriEnterpriseRoot | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2 | eriProducts | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2.4 | dnx | ERI-DNX-SMC-MIB |
| 1.3.6.1.4.1.644.2.4.2 | devices | ERI-DNX-SMC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.2 | dnxHDS3 | ERI-DNX-HDS3-MIB |
| 1.3.6.1.4.1.644.2.4.2.2.1 | hds3Config | ERI-DNX-HDS3-MIB |
| 1.3.6.1.4.1.644.2.4.2.2.1.1 | hds3PortConfigTable | ERI-DNX-HDS3-MIB |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1 | hds3PortConfigEntry | ERI-DNX-HDS3-MIB |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.14 | hds3M13RemLoop | ERI-DNX-HDS3-MIB |