EQUIPE-SYSTEM-MIB

All MIBs › EQUIPE-SYSTEM-MIB

Last Updated: 2001-12-04

Category: Vendor: Equipe

Description: Equipe Communications EBOX system MIB providing chassis-level hardware management for switch/router module types and faults.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EQUIPE-SYSTEM-MIB?

EQUIPE-SYSTEM-MIB is a vendor-specific SNMP module from Equipe Communications (maker of the EBOX chassis-based switch/router platform, later acquired by Tellabs) providing chassis-level system management for its modular switching/routing equipment. It exposes objects covering the chassis's hardware module inventory, module types installed in each slot, and fault conditions detected at the system level. Its central purpose is hardware status monitoring: administrators use it to identify which module types are installed in the chassis, to detect module faults or failures, and to get an overall system health picture of the EBOX platform, functioning much like a chassis-inventory-and-alarm MIB common on modular carrier equipment. No module description text with explicit dependencies was available, but system-level chassis MIBs of this kind commonly complement the standard ENTITY-MIB for physical entity inventory. It is typically deployed on Equipe Communications EBOX chassis systems used in carrier-class switch/router deployments, and administrators can download the EQUIPE-SYSTEM-MIB file to load into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EQUIPE-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Equipe Communications EBOX chassis switch/router systems

Monitoring Examples

No sample objects were provided for this MIB, so specific table or object names cannot be cited from the source. In general terms an administrator would expect to poll a chassis module-inventory table for installed module types per slot and a fault/alarm table to detect a failed or missing module; because the underlying identifiers are not available in the provided data, specific technical detail is intentionally left general rather than invented.

What Can Be Monitored

chassis module inventory and type
module/system fault conditions
overall chassis health status

Imported Objects

From RFC1155-SMI

TimeTicks
enterprises

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
equipe	1.3.6.1.4.1.5022
eqSystemMib	1.3.6.1.4.1.5022.1			This is the Equipe system MIB module.
eqSysProducts	1.3.6.1.4.1.5022.1.1
eqSysProductE3200	1.3.6.1.4.1.5022.1.1.1
eqSysSystemGrp	1.3.6.1.4.1.5022.1.2
eqSysSystem	1.3.6.1.4.1.5022.1.2.1
OCT eqSysSystemId	1.3.6.1.4.1.5022.1.2.1.1	OCTET STRING	read-only	The unique value assigned to each chassis at manufacturing time.
TIK eqSysPhysEntLastChangeTime	1.3.6.1.4.1.5022.1.2.1.2	TimeTicks	read-only	The value of sysUpTime when the last physical entity change event occurred (e.g. a module was inserted into the system).
eqSysConfig	1.3.6.1.4.1.5022.1.2.2
INT eqSysCfgCopyConfigFileAction	1.3.6.1.4.1.5022.1.2.2.1	INTEGER	read-write	A read of this object always returns the value other(1). Setting this object to copyCfgFile(2) will initiate a save of the current configuration and a copy of the config file on the local filesystem. The progress of this request can be monitored by polling the eqSysCfgCopyConfigFileStatus object. The name of the saved config file, including absolute filesystem path, is stored in the eqSysCfgSavedFilename attribute.
INT eqSysCfgCopyConfigFileStatus	1.3.6.1.4.1.5022.1.2.2.2	INTEGER	read-write	This object is used to monitor the progress of a request to save and copy the current config file on the local filesystem. The user may also do a set to reset this object to value copyCfgIdle(1).
STR eqSysCfgSavedFilename	1.3.6.1.4.1.5022.1.2.2.3	DisplayString	read-only	The name assigned to the saved config file.
eqEidReqTable	1.3.6.1.4.1.5022.1.2.3		not-accessible	This table is used to get equipe id values.
eqEidReqEntry	1.3.6.1.4.1.5022.1.2.3.1		not-accessible	An eid alloc entry.
INT eqEidReqIndex	1.3.6.1.4.1.5022.1.2.3.1.1	INTEGER	read-only	The unique value to identify this entry.
STR eqEidReqUser	1.3.6.1.4.1.5022.1.2.3.1.2	DisplayString	read-create	A textual string to identify the owner of this entry.
INT eqEidReqCount	1.3.6.1.4.1.5022.1.2.3.1.3	INTEGER	read-create	The count of equipe id's requested.
INT eqEidReqCountAlloc	1.3.6.1.4.1.5022.1.2.3.1.4	INTEGER	read-only	The count of equipe id's actually allocated.
INT eqEidReqAction	1.3.6.1.4.1.5022.1.2.3.1.5	INTEGER	read-create	A read of this object always returns the value other(1). Setting this object to alloc(2) will cause the agent to allocate new eid's. The number of eid's to allocate is determined by the value of eqEidReqCount object. The agent will create an entry in the eqEidResultTable containing the allocated eid's. The NMS can retrieve these values by doing a getnext using the eqEidReqIndex for this entry as the key.
INT eqEidReqActionStatus	1.3.6.1.4.1.5022.1.2.3.1.6	INTEGER	read-only	The result of the action requested.
ROW eqEidReqRowStatus	1.3.6.1.4.1.5022.1.2.3.1.7	RowStatus	read-create	This object is used to create and delete entries in this table.
eqEidResTable	1.3.6.1.4.1.5022.1.2.4		not-accessible	This table contains entries for allocated eid's.
eqEidResEntry	1.3.6.1.4.1.5022.1.2.4.1		not-accessible	An eid result entry.
INT eqEidResIndex	1.3.6.1.4.1.5022.1.2.4.1.1	INTEGER	read-only	The id value to identify this entry.
OID eqEidResData	1.3.6.1.4.1.5022.1.2.4.1.2	OBJECT IDENTIFIER	read-only	An array holding the allocated eid values.
eqSysModuleGrp	1.3.6.1.4.1.5022.1.3
eqSysModule	1.3.6.1.4.1.5022.1.3.1
eqModuleTable	1.3.6.1.4.1.5022.1.3.1.1		not-accessible	This table contains module info.
eqModuleEntry	1.3.6.1.4.1.5022.1.3.1.1.1		not-accessible	A module entry.
INT eqModuleEid	1.3.6.1.4.1.5022.1.3.1.1.1.1	INTEGER	read-only	The unique id assigned to the module.
INT eqModuleShelfId	1.3.6.1.4.1.5022.1.3.1.1.1.2	INTEGER	read-only	The shelf id in which this module is located.
INT eqModuleSlotId	1.3.6.1.4.1.5022.1.3.1.1.1.3	INTEGER	read-only	The slot id in which this module is located.
EQM eqModuleType	1.3.6.1.4.1.5022.1.3.1.1.1.4	EqModuleType	read-only	The type of module.
OCT eqModuleHwVersion	1.3.6.1.4.1.5022.1.3.1.1.1.5	OCTET STRING	read-only	The hardware version of the module.
EQM eqModuleStatus	1.3.6.1.4.1.5022.1.3.1.1.1.6	EqModuleStatus	read-only	The module status.
INT eqModuleAction	1.3.6.1.4.1.5022.1.3.1.1.1.7	INTEGER	read-write	A read of this object always returns the value other(1). Setting this to reset(2) causes the module to be reset.
eqModuleHealthTable	1.3.6.1.4.1.5022.1.3.1.2		not-accessible	This table contains module health info.
eqModuleHealthEntry	1.3.6.1.4.1.5022.1.3.1.2.1		not-accessible	A module health entry.
EQM eqModuleHealthStatus	1.3.6.1.4.1.5022.1.3.1.2.1.1	EqModuleHealthStatus	read-only	The module health status.
INT eqModuleMemTotal	1.3.6.1.4.1.5022.1.3.1.2.1.2	INTEGER	read-only	The total amount of sdram memory available on the module in megabytes.
INT eqModuleMemUsed	1.3.6.1.4.1.5022.1.3.1.2.1.3	INTEGER	read-only	The amount of used sdram memory on the module in megabytes.
INT eqModuleMemUsedPercent	1.3.6.1.4.1.5022.1.3.1.2.1.4	INTEGER	read-only	The amount of used sdram memory expressed as a percentage of total available memory.
INT eqModuleTemp	1.3.6.1.4.1.5022.1.3.1.2.1.5	INTEGER	read-only	The temp of the module in degrees centigrades.
INT eqModuleCpuUtil	1.3.6.1.4.1.5022.1.3.1.2.1.6	INTEGER	read-only	The cpu utilization of the module as a percentage.
EQM eqModuleFeedStatusA	1.3.6.1.4.1.5022.1.3.1.2.1.7	EqModuleFeedStatus	read-only	The module power feed A status.
EQM eqModuleFeedStatusB	1.3.6.1.4.1.5022.1.3.1.2.1.8	EqModuleFeedStatus	read-only	The module power feed B status.
eqHardDiskTable	1.3.6.1.4.1.5022.1.3.1.3		not-accessible	The hard disk status table.
eqHardDiskEntry	1.3.6.1.4.1.5022.1.3.1.3.1		not-accessible	A hard disk entry.
INT eqHardDiskEid	1.3.6.1.4.1.5022.1.3.1.3.1.1	INTEGER	read-only	The unique id assigned to the hard disk.
INT eqHardDiskShelfId	1.3.6.1.4.1.5022.1.3.1.3.1.2	INTEGER	read-only	The shelf id in which this hard disk is located.
INT eqHardDiskSlotId	1.3.6.1.4.1.5022.1.3.1.3.1.3	INTEGER	read-only	The slot id in which this hard disk is located.
INT eqHardDiskCapacity	1.3.6.1.4.1.5022.1.3.1.3.1.4	INTEGER	read-only	The hard disk capacity in megabytes.
INT eqHardDiskUsed	1.3.6.1.4.1.5022.1.3.1.3.1.5	INTEGER	read-only	The percentage of hard disk in use.
INT eqHardDiskUsedHiMark	1.3.6.1.4.1.5022.1.3.1.3.1.6	INTEGER	read-only	The percentage of hard disk in use which, when crossed, will trigger an eqHardDiskUsedHiMark trap to be generated.
INT eqHardDiskUsedLowMark	1.3.6.1.4.1.5022.1.3.1.3.1.7	INTEGER	read-only	The percentage of hard disk in use which, when crossed, will trigger an eqHardDiskLowMark trap to be generated.
eqFanUnitTable	1.3.6.1.4.1.5022.1.3.1.4		not-accessible	The fan unit status table.
eqFanUnitEntry	1.3.6.1.4.1.5022.1.3.1.4.1		not-accessible	A fan unit entry.
INT eqFanUnitEid	1.3.6.1.4.1.5022.1.3.1.4.1.1	INTEGER	read-only	The unique id assigned to the fan unit.
INT eqFanUnitShelfId	1.3.6.1.4.1.5022.1.3.1.4.1.2	INTEGER	read-only	The shelf id in which this fan unit is located.
INT eqFanUnitSlotId	1.3.6.1.4.1.5022.1.3.1.4.1.3	INTEGER	read-only	The slot id in which this fan unit is located.
INT eqFanUnitRpm	1.3.6.1.4.1.5022.1.3.1.4.1.4	INTEGER	read-only	The current rpm of this fan unit.
INT eqFanUnitRpmHiMark	1.3.6.1.4.1.5022.1.3.1.4.1.5	INTEGER	read-only	The fan unit rpm which, when crossed, will trigger an eqFanUnitUsedHiMark trap to be generated.
INT eqFanUnitRpmLowMark	1.3.6.1.4.1.5022.1.3.1.4.1.6	INTEGER	read-only	The fan unit rpm which, when crossed, will trigger an eqFanUnitUsedLowMark trap to be generated.
eqModuleRedTable	1.3.6.1.4.1.5022.1.3.1.5		not-accessible	This table contains module redundancy info.
eqModuleRedEntry	1.3.6.1.4.1.5022.1.3.1.5.1		not-accessible	A module redundancy entry.
INT eqModuleRedEid	1.3.6.1.4.1.5022.1.3.1.5.1.1	INTEGER	read-only	The unique id assigned to the module.
EQM eqModuleRedAdminRole	1.3.6.1.4.1.5022.1.3.1.5.1.2	EqModuleRedRole	read-only	The module's configured redundancy role.
EQM eqModuleRedOperRole	1.3.6.1.4.1.5022.1.3.1.5.1.3	EqModuleRedRole	read-only	The module's current redundancy role.
INT eqModuleRedPeerId	1.3.6.1.4.1.5022.1.3.1.5.1.4	INTEGER	read-only	The id of the module that is a peer to this module. The peer can be either a primary or a backup module. A value of zero indicates no peer module.
INT eqModuleRedAction	1.3.6.1.4.1.5022.1.3.1.5.1.5	INTEGER	read-write	A read of this object always returns the value other(1). Setting this to switchRole(2) causes the module to switch role with it's peer module.
eqStratumCentTable	1.3.6.1.4.1.5022.1.3.1.6		not-accessible	This table contains the central stratum timing subsystem info.
eqStratumCentEntry	1.3.6.1.4.1.5022.1.3.1.6.1		not-accessible	A central stratum timing subsystem entry.
INT eqStratumCentEid	1.3.6.1.4.1.5022.1.3.1.6.1.1	INTEGER	read-only	The unique id assigned to the module containing the central stratum timing subsystem.
INT eqStratumCentStatus	1.3.6.1.4.1.5022.1.3.1.6.1.2	INTEGER	read-only	The status of the central stratum timing subsystem.
INT eqStratumCentRedStatus	1.3.6.1.4.1.5022.1.3.1.6.1.3	INTEGER	read-only	The redundancy status of the central stratum timing subsystem.
INT eqStratumCentLevel	1.3.6.1.4.1.5022.1.3.1.6.1.4	INTEGER	read-only	The level of the central stratum timing subsystem.
INT eqStratumCentPrimaryRefStatus	1.3.6.1.4.1.5022.1.3.1.6.1.5	INTEGER	read-only	The primary reference status of the central stratum timing subsystem.
INT eqStratumCentSecondaryRefStatus	1.3.6.1.4.1.5022.1.3.1.6.1.6	INTEGER	read-only	The secondary reference status of the central stratum timing subsystem.
INT eqStratumCentStatusAction	1.3.6.1.4.1.5022.1.3.1.6.1.7	INTEGER	read-write	This object is used to change the status of the central stratum timing subsystem. A read of this object always returns the value other(1).
INT eqStratumCentRedAction	1.3.6.1.4.1.5022.1.3.1.6.1.8	INTEGER	read-write	This object is used to change the redundancy status of the central stratum timing subsystem. A read of this object always returns the value other(1).
eqStratumLocalTable	1.3.6.1.4.1.5022.1.3.1.7		not-accessible	This table contains the local stratum timing subsystem info.
eqStratumLocalEntry	1.3.6.1.4.1.5022.1.3.1.7.1		not-accessible	A local stratum timing subsystem entry.
INT eqStratumLocalEid	1.3.6.1.4.1.5022.1.3.1.7.1.1	INTEGER	read-only	The unique id assigned to the module containing the local stratum timing subsystem.
INT eqStratumLocalInputA1Status	1.3.6.1.4.1.5022.1.3.1.7.1.2	INTEGER	read-only	The input A1 status of the local stratum timing subsystem.
INT eqStratumLocalInputA2Status	1.3.6.1.4.1.5022.1.3.1.7.1.3	INTEGER	read-only	The input A2 status of the local stratum timing subsystem.
INT eqStratumLocalInputB1Status	1.3.6.1.4.1.5022.1.3.1.7.1.4	INTEGER	read-only	The input B1 status of the local stratum timing subsystem.
INT eqStratumLocalInputB2Status	1.3.6.1.4.1.5022.1.3.1.7.1.5	INTEGER	read-only	The input B2 status of the local stratum timing subsystem.
INT eqStratumLocalInputUsed	1.3.6.1.4.1.5022.1.3.1.7.1.6	INTEGER	read-only	This object indicates which of the two inputs on the local startum timing subsystem is currently being used.
INT eqStratumLocalRecoveredRefStatus	1.3.6.1.4.1.5022.1.3.1.7.1.7	INTEGER	read-only	This object indicates if this local startum timing subsystem is providing a reference source to either of the two inputs.
INT eqStratumLocalStatusAction	1.3.6.1.4.1.5022.1.3.1.7.1.8	INTEGER	read-write	This object is used to change the input being used by the local stratum timing subsystem. A read of this object always returns the value other(1).
eqSysFaultGrp	1.3.6.1.4.1.5022.1.4
eqSysFault	1.3.6.1.4.1.5022.1.4.1
eqFaultTable	1.3.6.1.4.1.5022.1.4.1.1		not-accessible	This table contains fault info.
eqFaultEntry	1.3.6.1.4.1.5022.1.4.1.1.1		not-accessible	A fault entry.
INT eqFaultDomain	1.3.6.1.4.1.5022.1.4.1.1.1.1	INTEGER	read-only	The domain of the entity handling the fault.
INT eqFaultHandle	1.3.6.1.4.1.5022.1.4.1.1.1.2	INTEGER	read-only	The handle of the fault within the domain.
EQF eqFaultClass	1.3.6.1.4.1.5022.1.4.1.1.1.3	EqFaultClass	read-only	The class field of the fault descriptor.
INT eqFaultSubclass	1.3.6.1.4.1.5022.1.4.1.1.1.4	INTEGER	read-only	The subclass field of the fault descriptor.
INT eqFaultType	1.3.6.1.4.1.5022.1.4.1.1.1.5	INTEGER	read-only	The type field of the fault descriptor.
INT eqFaultInstance	1.3.6.1.4.1.5022.1.4.1.1.1.6	INTEGER	read-only	The instance field of the fault descriptor.
EQF eqFaultSeverity	1.3.6.1.4.1.5022.1.4.1.1.1.7	EqFaultSeverity	read-only	The severity of the fault.
EQF eqFaultScope	1.3.6.1.4.1.5022.1.4.1.1.1.8	EqFaultScope	read-only	The scope in which the fault was handled.
STR eqFaultSwlm	1.3.6.1.4.1.5022.1.4.1.1.1.9	DisplayString	read-create	A textual string to identify the type of swlm if scope is swlm.
INT eqFaultModule	1.3.6.1.4.1.5022.1.4.1.1.1.10	INTEGER	read-only	The EID of the physical module on which the fault occurred.
STR eqFaultTime	1.3.6.1.4.1.5022.1.4.1.1.1.11	DisplayString	read-create	A textual string indicating the time at which the fault occurred.
STR eqFaultDetails	1.3.6.1.4.1.5022.1.4.1.1.1.12	DisplayString	read-create	A textual string providing additional details about the fault.
eqSysSmsGrp	1.3.6.1.4.1.5022.1.5
eqSysSms	1.3.6.1.4.1.5022.1.5.1
INT eqReleaseNextId	1.3.6.1.4.1.5022.1.5.1.1	INTEGER	read-only	The next available release id value.
EQR eqReleaseRevert	1.3.6.1.4.1.5022.1.5.1.2	EqReleaseRevert	read-write	Writing this initiates a revert to the default release.
eqReleaseTable	1.3.6.1.4.1.5022.1.5.1.3		not-accessible	This table contains installed software release status and control.
eqReleaseEntry	1.3.6.1.4.1.5022.1.5.1.3.1		not-accessible	A software release entry.
INT eqReleaseId	1.3.6.1.4.1.5022.1.5.1.3.1.1	INTEGER	read-only	A box unique number which identifies the release .
STR eqReleaseName	1.3.6.1.4.1.5022.1.5.1.3.1.2	DisplayString	read-create	The name of the release.
EQR eqReleaseVerificationStatus	1.3.6.1.4.1.5022.1.5.1.3.1.3	EqReleaseVerificationStatus	read-only	The verification status of the release.
EQR eqReleaseUpgradeScope	1.3.6.1.4.1.5022.1.5.1.3.1.4	EqReleaseUpgradeScope	read-only	The scope of an upgrade to this release with respect to the current release.
EQR eqReleaseSchemaChange	1.3.6.1.4.1.5022.1.5.1.3.1.5	EqReleaseSchemaChange	read-only	The state of the release.
EQR eqReleaseState	1.3.6.1.4.1.5022.1.5.1.3.1.6	EqReleaseState	read-only	The state of the release.
INT eqReleaseModulesVerified	1.3.6.1.4.1.5022.1.5.1.3.1.7	INTEGER	read-only	The number of modules that have been verified.
INT eqReleaseNumModules	1.3.6.1.4.1.5022.1.5.1.3.1.8	INTEGER	read-only	The number of modules contained in the release.
STR eqReleaseBadModule	1.3.6.1.4.1.5022.1.5.1.3.1.9	DisplayString	read-only	The the name of a missing module or one with a checksum error.
EQR eqReleaseCommand	1.3.6.1.4.1.5022.1.5.1.3.1.10	EqReleaseCommand	read-create	A command to peform on the release
EQR eqReleaseCommandStatus	1.3.6.1.4.1.5022.1.5.1.3.1.11	EqReleaseCommandStatus	read-create	The status of a command contained in eqReleaseCommand
STR eqReleaseSchemaVersion	1.3.6.1.4.1.5022.1.5.1.3.1.12	DisplayString	read-only	The schema's version string for the release
EQR eqReleaseConfigAvail	1.3.6.1.4.1.5022.1.5.1.3.1.13	EqReleaseConfigAvail	read-only	Indicates if the release has a config file
ROW eqReleaseRowStatus	1.3.6.1.4.1.5022.1.5.1.3.1.14	RowStatus	read-create	This object is used to create and delete entries in this table.
eqInstallTable	1.3.6.1.4.1.5022.1.5.1.4		not-accessible	This table contains the paths where a new image should be installed.
eqInstallEntry	1.3.6.1.4.1.5022.1.5.1.4.1		not-accessible	An install entry.
INT eqInstallId	1.3.6.1.4.1.5022.1.5.1.4.1.1	INTEGER	read-only	A box unique number which identifies the installation path.
STR eqInstallPath	1.3.6.1.4.1.5022.1.5.1.4.1.2	DisplayString	read-only	The full name of the installation path.
STR eqUpgradeState	1.3.6.1.4.1.5022.1.5.1.5	DisplayString	read-only	The current state of an upgrade.
eqSysIntfGrp	1.3.6.1.4.1.5022.1.6
eqIntfBertTable	1.3.6.1.4.1.5022.1.6.1		not-accessible	This table is used to initiate a Bit Error Rate Test (BERT) on a sonet port and also for reading statistics on the initiated test.
eqIntfBertEntry	1.3.6.1.4.1.5022.1.6.1.1		not-accessible	A BERT entry.
INT eqIntfBertEid	1.3.6.1.4.1.5022.1.6.1.1.1	INTEGER	read-only	The eid assigned to the interface.
INT eqIntfBertGeneratorState	1.3.6.1.4.1.5022.1.6.1.1.2	INTEGER	read-only	The current BERT generator state.
INT eqIntfBertMonitorState	1.3.6.1.4.1.5022.1.6.1.1.3	INTEGER	read-only	The current BERT monitor state. A value of active(1) indicates that a BERT test is currently running.
INT eqIntfBertMonitorStatus	1.3.6.1.4.1.5022.1.6.1.1.4	INTEGER	read-only	The BERT monitor status value. Note that this object is only valid when a BERT test is running.
INT eqIntfBertMonitorOutOfSyncTime	1.3.6.1.4.1.5022.1.6.1.1.5	INTEGER	read-only	The total amount of time, in seconds, that the monitor has been out of synch since the BERT test was started.
INT eqIntfBertRequestedBitErrorCount	1.3.6.1.4.1.5022.1.6.1.1.6	INTEGER	read-only	The number of bit errors the user wants inserted onto the interface. This value is used when the user issues a bit error request by a set to the eqIntfBertAction object.
INT eqIntfBertInsertedBitErrorCount	1.3.6.1.4.1.5022.1.6.1.1.7	INTEGER	read-only	The actual number of bit errors inserted onto the interface.
INT eqIntfBertMeasuredByteErrorCount	1.3.6.1.4.1.5022.1.6.1.1.8	INTEGER	read-only	The number of byte errors measured on the interface.
DAT eqIntfBertTestStartTime	1.3.6.1.4.1.5022.1.6.1.1.9	DateAndTime	read-only	The time that the test was started.
INT eqIntfBertTestDuration	1.3.6.1.4.1.5022.1.6.1.1.10	INTEGER	read-only	The time, in seconds, that the test has been running.
INT eqIntfBertAction	1.3.6.1.4.1.5022.1.6.1.1.11	INTEGER	read-write	A read of this object always returns the value other(1). Setting this object to insertBitError(2) inserts a bit error on the interface.

RFC description

Defines system and module types, status, and health monitoring for Equipe EBOX multi-service switches.

Start monitoring Equipe Communications EBOX chassis switch/router system (module inventory/faults) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EQUIPE-SYSTEM-MIB

What Is EQUIPE-SYSTEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description