EQLIPADDR-MIB :: eqlifPortAttr

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EQLIPADDR-MIB › eqlifPortAttr

eqlifPortAttr

Module: EQLIPADDR-MIB

OID (symbolic): EQLIPADDR-MIB::eqlifPortAttr

OID (numeric): 1.3.6.1.4.1.12740.9.2.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This field specifies the mode of the specified port as follows:

What is eqlifPortAttr?

This setting restricts what kind of iSCSI traffic the EqualLogic port is allowed to carry: storage array traffic only, initiator traffic only, or either. Admins use it to segregate storage-group traffic from initiator traffic on multi-homed arrays, which matters for network isolation and performance. Setting the value to attr-initiator-only dedicates a port exclusively to iSCSI initiators, so no peer array group traffic will use it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12740.9.2.1.2
snmpwalk -v2c -c public <target> EQLIPADDR-MIB::eqlifPortAttr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.12740.9.2.1.2.1
snmpget -v2c -c public <target> EQLIPADDR-MIB::eqlifPortAttr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.12740.9.2.1.2.1 i <value>

Start monitoring Dell EqualLogic PS-series iSCSI SAN storage array (IP/network interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EQLIPADDR-MIB::eqlifPortAttr OID value, configure state conditions and alerts, and monitor any Dell EqualLogic PS-series iSCSI SAN storage array (IP/network interface config) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.12740equalLogicEQUALLOGIC-SMI
Numeric OIDNameModule
1.3.6.1.4.1.12740.9eqlipaddrModuleEQLIPADDR-MIB
1.3.6.1.4.1.12740.9.2eqlifTableEQLIPADDR-MIB
1.3.6.1.4.1.12740.9.2.1eqlifEntryEQLIPADDR-MIB
1.3.6.1.4.1.12740.9.2.1.2eqlifPortAttrEQLIPADDR-MIB