All MIBs › EQL-DCB-MIB › eqlDcbxLocETSRecoTrafficClassGroupBandwidthTable
eqlDcbxLocETSRecoTrafficClassGroupBandwidthTable
Module: EQL-DCB-MIB
OID (symbolic): EQL-DCB-MIB::eqlDcbxLocETSRecoTrafficClassGroupBandwidthTable
OID (numeric): 1.3.6.1.4.1.12740.19.1.2.1.7
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each octet contains the bandwidth in percent that the remote station is recommending to be allocated to the traffic class group. Valid values are between 0 and 100 inclusive. The total of all eight octets must equal 100.
Note that an octet string is used instead of a table to enable atomic programming of these values which is required to fulfill the requirement that they always total to 100.
What is eqlDcbxLocETSRecoTrafficClassGroupBandwidthTable?
Read-only 8-octet snapshot of the bandwidth percentage the local port is currently recommending per traffic class group under ETS, mirroring eqlDcbxAdminETSRecoTrafficClassGroupBandwidthTable's configured value in operational form.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12740.19.1.2.1.7 snmpwalk -v2c -c public <target> EQL-DCB-MIB::eqlDcbxLocETSRecoTrafficClassGroupBandwidthTable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.12740.19.1.2.1.7.1 snmpget -v2c -c public <target> EQL-DCB-MIB::eqlDcbxLocETSRecoTrafficClassGroupBandwidthTable.1
Start monitoring Dell EqualLogic PS-series iSCSI SAN storage array (Data Center Bridging/DCBX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EQL-DCB-MIB::eqlDcbxLocETSRecoTrafficClassGroupBandwidthTable OID value, configure state conditions and alerts, and monitor any Dell EqualLogic PS-series iSCSI SAN storage array (Data Center Bridging/DCBX) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.12740 | equalLogic | EQUALLOGIC-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.12740.19 | eqlDcbMib | EQL-DCB-MIB |
| 1.3.6.1.4.1.12740.19.1 | eqlDcbMIBObjects | EQL-DCB-MIB |
| 1.3.6.1.4.1.12740.19.1.2 | eqlDcbDynamicIfTable | EQL-DCB-MIB |
| 1.3.6.1.4.1.12740.19.1.2.1 | eqlDcbDynamicIfEntry | EQL-DCB-MIB |
| 1.3.6.1.4.1.12740.19.1.2.1.7 | eqlDcbxLocETSRecoTrafficClassGroupBandwidthTable | EQL-DCB-MIB |