EQL-DCB-MIB :: eqlDcbxConfigVLANId

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EQL-DCB-MIB › eqlDcbxConfigVLANId

eqlDcbxConfigVLANId

Module: EQL-DCB-MIB

OID (symbolic): EQL-DCB-MIB::eqlDcbxConfigVLANId

OID (numeric): 1.3.6.1.4.1.12740.19.1.1.1.17

Node type: OBJECT-TYPE

Type: EqlVlanIdentifier

Access: read-write

Description: VLAN ID to use for DCB.

What is eqlDcbxConfigVLANId?

Specifies the VLAN tag (0-4095) applied to DCB-negotiated traffic on this interface; the unusual default of 4095 acts as a sentinel meaning 'no VLAN configured' until an admin sets a real VLAN ID or enables auto-detection.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12740.19.1.1.1.17
snmpwalk -v2c -c public <target> EQL-DCB-MIB::eqlDcbxConfigVLANId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.12740.19.1.1.1.17.1
snmpget -v2c -c public <target> EQL-DCB-MIB::eqlDcbxConfigVLANId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.12740.19.1.1.1.17.1 s <value>

Start monitoring Dell EqualLogic PS-series iSCSI SAN storage array (Data Center Bridging/DCBX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EQL-DCB-MIB::eqlDcbxConfigVLANId OID value, configure state conditions and alerts, and monitor any Dell EqualLogic PS-series iSCSI SAN storage array (Data Center Bridging/DCBX) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.12740equalLogicEQUALLOGIC-SMI
Numeric OIDNameModule
1.3.6.1.4.1.12740.19eqlDcbMibEQL-DCB-MIB
1.3.6.1.4.1.12740.19.1eqlDcbMIBObjectsEQL-DCB-MIB
1.3.6.1.4.1.12740.19.1.1eqlDcbStaticIfTableEQL-DCB-MIB
1.3.6.1.4.1.12740.19.1.1.1eqlDcbStaticIfEntryEQL-DCB-MIB
1.3.6.1.4.1.12740.19.1.1.1.17eqlDcbxConfigVLANIdEQL-DCB-MIB