All MIBs › EQL-DCB-MIB › eqlDcbxAdminETSRecoTrafficClassGroupBandwidthTable
eqlDcbxAdminETSRecoTrafficClassGroupBandwidthTable
Module: EQL-DCB-MIB
OID (symbolic): EQL-DCB-MIB::eqlDcbxAdminETSRecoTrafficClassGroupBandwidthTable
OID (numeric): 1.3.6.1.4.1.12740.19.1.1.1.11
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each octet contains the bandwidth in percent that the remote station is recommending to be allocated to the traffic class group. Valid values are between 0 and 100 inclusive. The total of all eight octets must equal 100.
Note that an octet string is used instead of a table to enable atomic programming of these values which is required to fulfill the requirement that they always total to 100.
What is eqlDcbxAdminETSRecoTrafficClassGroupBandwidthTable?
Mirrors eqlDcbxAdminETSConTrafficClassGroupBandwidthTable's 8-octet layout, but here each octet records the bandwidth percentage (summing to 100) that the remote switch is recommending for that traffic class group, packed atomically to guarantee the total always equals 100%. Its default also reserves 100% for group 0 until a real recommendation is negotiated.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12740.19.1.1.1.11 snmpwalk -v2c -c public <target> EQL-DCB-MIB::eqlDcbxAdminETSRecoTrafficClassGroupBandwidthTable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.12740.19.1.1.1.11.1 snmpget -v2c -c public <target> EQL-DCB-MIB::eqlDcbxAdminETSRecoTrafficClassGroupBandwidthTable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.12740.19.1.1.1.11.1 s <value>
Start monitoring Dell EqualLogic PS-series iSCSI SAN storage array (Data Center Bridging/DCBX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EQL-DCB-MIB::eqlDcbxAdminETSRecoTrafficClassGroupBandwidthTable OID value, configure state conditions and alerts, and monitor any Dell EqualLogic PS-series iSCSI SAN storage array (Data Center Bridging/DCBX) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.12740 | equalLogic | EQUALLOGIC-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.12740.19 | eqlDcbMib | EQL-DCB-MIB |
| 1.3.6.1.4.1.12740.19.1 | eqlDcbMIBObjects | EQL-DCB-MIB |
| 1.3.6.1.4.1.12740.19.1.1 | eqlDcbStaticIfTable | EQL-DCB-MIB |
| 1.3.6.1.4.1.12740.19.1.1.1 | eqlDcbStaticIfEntry | EQL-DCB-MIB |
| 1.3.6.1.4.1.12740.19.1.1.1.11 | eqlDcbxAdminETSRecoTrafficClassGroupBandwidthTable | EQL-DCB-MIB |