All MIBs › EQL-DCB-MIB › eqlDcbxAdminETSConTrafficClassGroupBandwidthTable
eqlDcbxAdminETSConTrafficClassGroupBandwidthTable
Module: EQL-DCB-MIB
OID (symbolic): EQL-DCB-MIB::eqlDcbxAdminETSConTrafficClassGroupBandwidthTable
OID (numeric): 1.3.6.1.4.1.12740.19.1.1.1.10
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each octet contains the bandwidth in percent to be allocated to the traffic class group. Valid values are between 0 and 100 inclusive. The total of all eight octets must equal 100.
Note that an octet string is used instead of a table to enable atomic programming of these values which is required to fulfill the requirement that they always total to 100.
What is eqlDcbxAdminETSConTrafficClassGroupBandwidthTable?
An 8-octet string where octet N holds the percentage of link bandwidth (0-100) assigned to traffic class group N, and all eight values must sum to 100; it is packed as a single octet string rather than a table so an admin can update all eight allocations atomically in one SNMP SET. The default hex value gives group 0 the full 100% bandwidth share.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12740.19.1.1.1.10 snmpwalk -v2c -c public <target> EQL-DCB-MIB::eqlDcbxAdminETSConTrafficClassGroupBandwidthTable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.12740.19.1.1.1.10.1 snmpget -v2c -c public <target> EQL-DCB-MIB::eqlDcbxAdminETSConTrafficClassGroupBandwidthTable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.12740.19.1.1.1.10.1 s <value>
Start monitoring Dell EqualLogic PS-series iSCSI SAN storage array (Data Center Bridging/DCBX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EQL-DCB-MIB::eqlDcbxAdminETSConTrafficClassGroupBandwidthTable OID value, configure state conditions and alerts, and monitor any Dell EqualLogic PS-series iSCSI SAN storage array (Data Center Bridging/DCBX) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.12740 | equalLogic | EQUALLOGIC-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.12740.19 | eqlDcbMib | EQL-DCB-MIB |
| 1.3.6.1.4.1.12740.19.1 | eqlDcbMIBObjects | EQL-DCB-MIB |
| 1.3.6.1.4.1.12740.19.1.1 | eqlDcbStaticIfTable | EQL-DCB-MIB |
| 1.3.6.1.4.1.12740.19.1.1.1 | eqlDcbStaticIfEntry | EQL-DCB-MIB |
| 1.3.6.1.4.1.12740.19.1.1.1.10 | eqlDcbxAdminETSConTrafficClassGroupBandwidthTable | EQL-DCB-MIB |